Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HARDWARE

TOOLS REQUIRED

Phillips head screwdriver

1 Place mirror frame face down on a smooth, carpeted

surface. Carefully place the mirror between the spacers on

the back of the frame. Make sure the beveled edge of the

mirror faces down.

Thank you for purchasing the Alden 25" Round

Mirror. This page lists all the contents included in

the box. Please take time to identify the hardware

as well as the individual components of this product.

As you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect

them from damage.

NOTE: 2 people are required to safely hang this

mirror.

COMPONENTS

1 - mirror frame

1 - mirror

1 - plywood back

ALDEN 25" ROUND MIRROR

Page 1 of 2

Made in China - r03

Missing hardware? Please call 800.606.6387 for

replacements.

8 -screws

8 -mounting

tabs

1 - hanging wire

Mirror with

beveled edge

facing down

PAGE 1
ALDEN 25" ROUND MIRROR HARDWARE 8 -screws Thank you for purchasing the Alden 25" Round Mirror. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. NOTE: 2 people are required to safely hang this mirror. 8 -mounting tabs 1 - hanging wire Missing hardware? Please call 800.606.
PAGE 2
ALDEN 25" ROUND MIRROR 2 Place plywood back on top of mirror, between the spacers. 3 Secure 6 mounting tabs to back of frame assembly with 6 screws, leaving 2 holes open as shown. Tighten each screw with a phillips head screwdriver. HANGING INSTRUCTIONS Please note that hanging hardware is not included with this mirror. Use hardware appropriate for your wall type. If you are unsure about your wall type, consult a professional or your local hardware store.