Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Abbott Six-Drawer Dresser

ASSEMBLY HARDWARE

TOOLS REQUIRED

COMPONENTS

BOX 1

COMPONENTS

BOX 2

WALL MOUNTING HARDWARE

Made in Vietnam - r05 Page 1 of 5

Thank you for purchasing the Abbott Six Drawer

Dresser. This page lists the contents included in the

box. Please take time to identify the hardware as well

as the individual components of this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

ABBOTT SIX DRAWER DRESSER

Missing hardware?

Please call 800.606.6387

for replacements.

2 - side panels

(1 left, 1 right)

6 - drawer

bottoms

20 - cams

16 - wood

dowels

1 - bottom panel 1 - top

crossbar

1 - top

panel

1 - partition

1 - bottom

crossbar

1 - support leg

20 - cam

screws

4 - allen

screws

48 - large

screws

44 - small

screws

6 - drawer backs6 - drawer fronts 12 - drawer sides

(6 left, 6 right)

2 - back panels

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

(We recommend the use of hand tools instead of power tools)

phillips head screwdriver

allen wrench

(included)

1 - wall strap

1 - wall screw

1 - washer

Summary of content (5 pages)

PAGE 1
ABBOTT SIX DRAWER DRESSER ASSEMBLY HARDWARE 16 - wood dowels 48 - large screws 20 - cam screws 4 - allen screws 44 - small screws 20 - cams Missing hardware? Please call 800.606.6387 for replacements. WALL MOUNTING HARDWARE Thank you for purchasing the Abbott Six Drawer Dresser. This page lists the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
ABBOTT SIX DRAWER DRESSER NOTE: Do not over tighten the cam screws A partition A top panel B bottom frame B NOTE: Make sure arrows on each cam point toward nearest edge with holes 1 A) Insert 10 cam screws into top panel as shown. Secure, but do not over tighten, cam screws using a phillips head screwdriver. B) Insert 4 wood dowels and 6 cams into bottom panel as shown. Make sure arrows on each cam point toward nearest edge with holes.
PAGE 3
ABBOTT SIX DRAWER DRESSER right side panel top crossbar bottom crossbar A B support leg left side panel 5 Attach top and bottom crossbars to partition with 1 allen screw per crossbar as shown. 6 A) Fit dowels of assembled unit into corresponding holes of left and right side panels. Using a phillips head screwdriver, turn each cam clockwise until it securely engages each cam screw. B) Attach support leg to bottom panel of assembly as shown. Turn leg clockwise to secure.
PAGE 4
ABBOTT SIX DRAWER DRESSER drawer front right drawer side left drawer side 9 Attach left and right drawer sides to drawer front with 4 large screws as shown, using a screwdriver. drawer bottom 10 Fit drawer bottom to into corresponding grooves of drawer sides/front as shown. drawer back 11 Attach drawer back to drawer sides with 4 large screws as shown. Repeat steps 9-11 for remaining drawer assemblies.
PAGE 5
ABBOTT SIX DRAWER DRESSER OPTIONAL SAFETY MOUNTING INSTRUCTIONS For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A. Insert wall screw (not included) through end of wall strap and into wall as shown. B.