Operator’s Manual 12V INFLATOR Model No. 75120 Safety Guidelines Assembly Operation Maintenance Troubleshooting CAUTION: Read the Safety Guidelines and All Instructions Carefully Before Operating. Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A. Visit our Craftsman website: www.craftsman.
TABLE OF CONTENTS WARRANTY ................................................................................ 1 REPLACEMENT PARTS ............................................................ 1 SAFETY GUIDELINES-DEFINITIONS ....................................... 2 IMPORTANT SAFETY INSTRUCTIONS ................................. 2-6 GLOSSARY ................................................................................ 6 ACCESSORIES...........................................................................
SAFETY GUIDELINES - DEFINITIONS This manual contains information that is important for you to know and understand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols below. Please read the manual and pay attention to these sections. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
For best results and more efficient power, it is recommended that you operate your inflator with your VEHICLE’S ENGINE RUNNING, making absolutely sure you are outside or in an open, well-ventilated area and NOT INSIDE A CONFINED AREA, SUCH AS A GARAGE as bodily injury or asphyxiation resulting in death could occur. ALWAYS ALLOW FOR PROPER VENTILATION. Most vehicle 12 Volt power outlets will operate with vehicle ignition off; however, some vehicles require that the ignition be turned on.
HAZARD WARNING: Risk of Bursting What Could Happen How To Prevent It ATTACHMENTS & ACCESSORIES: Exceeding the pressure rating of air operated accessories, tires, inflatable balls, and other inflatables item can cause them to explode or fly apart, and could result in serious injury. Follow the equipment manufacturer’s recommendation and never exceed the maximum allowable pressure rating of attachments or inflatable items.
HAZARD WARNING: Risk of Burns What Could Happen How To Prevent It Touching exposed metal such as the inflator head or outlet tubes, can result in serious burns. Never touch any exposed metal parts on inflator during or immediately after operation. Inflator will remain hot for several minutes after operation. Do not reach around protective shrouds or attempt maintenance until unit has been allowed to cool.
HAZARD WARNING: Risk of Unsafe Operation What Could Happen How To Prevent It Unsafe operation of your inflator could lead to serious injury or death to you or others. Review and understand all instructions and warnings in this manual. Become familiar with the operation and controls of the inflator. Keep operating area clear of all persons, pets and obstacles. Keep children away from the inflator at all times. Do not operate the product when fatigued or under the influence of alcohol or drugs.
ACCESSORIES This unit is capable of powering the following Accessories that are included with your inflator: Air Needle: Used to inflate sports balls. Presta Valve Adaptor: Used to inflate high performance bike tires. High Flow Inflator/Deflator Adaptor with three nozzles and seal ring: Used to inflate or deflate air mattresses, small boats, inflatable toys, and other items that require large volume of low-pressure air.
OPERATION Know your Inflator READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustration with your unit to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. Description of Operation On/Off Switch: Used to turn Inflator on and off. LED Light: Used for inflating in low light conditions. Pressure Gauge: Gives the pressure reading in PSI.
OPERATION To inflate vehicle and bicycle tires 1. 2. 3. 4. To inflate sports ball, air mattress, rubber raft, etc. Remove 12 Volt Direct Drive Inflator from carrying case and place evenly on flat surface. Connect the PVC coil air hose to the Inflator by pulling back on the quick connect coupler collar and inserting this on valve located on the end of the 1 foot rubber air hose. Push in firmly and pull the quick connect coupler back until you hear a click to lock the PVC coil in place.
High Flow Inflator/Deflator Adaptor Deflation Position For larger inflatable items, you may wish to use the High Flow Inflator/Deflator Adaptor as follows: 1. Connect the screw-on valve to high flow inflator/deflator adaptor as shown. Twist the screw-on valve clockwise until it is securely attached. 4. Insert nozzle into inflatable and start inflator. 2. Choose nozzle to be used to inflate or deflate.
MAINTENANCE Cleaning 1. Turn the On/Off switch to Off and unplug the cord. 2. Wipe exterior plastic and metal parts clean using damp cloth. Do not get moisture or water into interior moving parts. 3. Any other servicing should be performed by a qualified service representative. TROUBLESHOOTING WARNING: Risk of Unsafe Operation. Voltage sources, moving parts, or compressed air sources are exposed when repairing the inflator. Personal injury can occur. Unplug the inflator before attempting the repairs.
Get it fixed, at your home or ours! Your Home add new step For troubleshooting, product manuals and expert advice: www.managemylife.com For repair – in your home – of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it ! For the replacement parts, accessories and owner’s manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters.