Manual

ManualsBrandsCraftsman ManualsTool StorageOfficial Craftsman tool chest

Operator's Manual

Please indicate the following information from the service part drawing provided.

Model Number:

Model Description:

*Your model may vary from the one shown.

CAUTION: Read and follow all Safety Rules and Operating Instructions before first use

of this product. Retain this document for future reference.

Distributed by Sears Brands Management Corporation, Hoffman Estates, IL 60179 USA

F890A13

SAFETY WARNINGS AND CAUTIONS:

• DO NOT stand on this product. You may fall which may cause personal injury.

•WEAR SAFETY GLASSES when removing or repositioning the slides. The tool could

slip which may cause personal injury.

•When moving this product, do not pull it. Push the product to prevent personal injury.

•Stacked products should be bolted together. The products could become unstable and

tip, which may cause personal injury or product damage.

• Handle and swivel casters must be attached on the same side of the product.

• USE THE BRAKES when not moving this product. This will prevent the product from

rolling, which may cause personal injury or product damage.

• BE CAREFUL when opening more than one drawer. The product may become un

stable and tip, which may cause personal injury or product damage.

• DO NOT mount this product on a truck bed or any other moving object. This may cause

personal injury or product damage.

• DO NOT step in the drawers. You may fall which may cause personal injury.

•Appropriately secure this product before moving it with a forklift.

• DO NOT tow with power equipment. The product could tip, which may cause personal

injury or product damage.

• DO NOT alter this product in any manner. For example, do not weld external Iockbars or

attach electrical equipment. This may cause product damage or personal injury.

• Keep the product on level surfaces. The product may become unstable and tip if stored

or moved on an un-level surface, which may cause personal injury or product damage.

•When rearranging the drawers, be careful not to put too many heavy items in the top

drawers. The product could become top heavy and tip, which may cause personal injury

or product damage.

• BE CAREFUL when closing the cover. Remove hands before the cover closes

completely to prevent personal injury.

• Close the cover and lock the drawers and doors before moving this product. The

drawers or doors could come open and make the product unstable and tip, which may

cause personal injury or product damage.

•When locking this product, close the drawers before closing the cover for lock bars to

work properly.

•The maximum weight for each drawer should be no more than 25 pounds.

•The maximum product weight, including contents, should be no more than 300 pounds

for tool centers.

Call 1=800=4MY=HOME (1-800=469=4663) for Service Parts.

Refer to Service Parts Drawing for full listing of Service Parts.

Summary of content (6 pages)

PAGE 1
SAFETY Operator's WARNINGS AND CAUTIONS: • DO NOT stand on this product. Manual •WEAR SAFETY GLASSES You may fall which may cause personal injury. when removing or repositioning the slides. The tool could slip which may cause personal injury. •When moving this product, do not pull it. Push the product to prevent personal •Stacked products should be bolted together. The products could become injury. unstable and tip, which may cause personal injury or product damage.
PAGE 2
HARDWARE: • Attach casters using 1/4-20 hex screws B Q 1/4-20 Hex Nut 1/4-20 x 7/16 and 1/4-20 Wrench tighten. • Return the roll-awayto O _) _ [}_ 8-32 x 1/4 _] @ O Hex Screw its upright MOUNTING CHEST: • Remove the drawer from the roll-away (refer to the drawer removal Chest instructions). position. • Lift the chest onto the roll-away. Line up the holes in the bottom of the chest Pan Head Screw MOUNTING iNTERMEDiATE with the holes in the top of the roll-away.
PAGE 3
TO LOCK TOOL CENTER: • Insert the slotted end of the Iockbar REMOVING through the slot in the top tray and down into the slot on the panel and in the base. AND iNSTALLING DRAWERS: • Fullyextend the drawer. Push it back 1/4". • Insert a screwdriver into the slot in the • The slot in the locking bar fits over the knob on the panel. • Close the cover and lock with a slide and depress the stop until it clears the lance. padlock. (Padlock • Repeat the procedure on the other slide. Remove the drawer.
PAGE 4
ADVERTENCIAS Manual del Operador Y PRECAUCIONES DE SEGURIDAD: • NO se pare sobre este producto. Se puede caery • USE GAFAS al quitar o volver a situar las correderas. DE SEGURIDAD resbalar la herramienta • Los productos y causar lesiones lesionarse. Se podria personales. apilados se deben atomillar entre si. Podrian quedar inestables y volcarse, Io cual podria causar lesiones personales o da_os al producto. •AI mover el producto, no tire del mismo.
PAGE 5
QUINCALLERIA: B@ Tuerca Hexagonalde @Sm Tornillo 1/4-20 • Asegure las ruedecillas usando tornillos hexagonales de 1/4-20 x 7/16 y 1/4-20 tuercas Hexagonal x 7/16 hexagonales Aprietelos de de 1/4-20. con una Ilave de tuercas. Tuerca Hexagonal MONTAJE de 8-32 Alinee los agujeros en la parte inferior de la caja con los de la superticie de la deslizadera.
PAGE 6
QUITAR E INSTALAR de la caja deslizable se superior Echelo hacia atrb.s 1/4 de pulgada. • Inserte un destornillador en la ranura de la guia y apriete el tope hasta que libre la lanza. • Repita el procedimiento de la misma. La barra de bloqueo guarda en una ranura en la esquina CAJONES: • Saque el caj6n por completo. superior delantera de la unidad.