CRAFTSMAN oe SAFETY WARNINGS AND CAUTIONS: » DO NOT stand on this product. You may fall which may cause personal injury. Operator's Manual WEAR SAFETY GLASSES AND GLOVES when cutting the banding material. The bands may snap which may cause personal injury. WEAR SAFETY GLASSES when removing or repositioning the slides. The tool BALL BEARING SERIES could steep which may cause personal injury. When moving this product, do not pull it. Push the product to prevent personal injury.
Call 1-800-366-7278 for Service Parts Refer to Service Parts Drawing for full listing of Service Parts HARDWARE: bo 14-0 x 4% PHILLIPS BREW 14-45 «BE HEX § i TR SIDE HANDLE ATTACHMENT: NOTE: Holes in the handle are tapped requiring no nuts for installation, « Attach the side handle using (4) 14-10 x 3/4 fillips screws. Do not over tighten screws. CASTER INSTALLATION: NOTE: Use adequate manpower for this operation. « Lay the cart down an its back. Use packaging material to protect the paint finish.
| Cc RA FTS M A N° SEGURIDAD Manual del operador ADVERTENCIAS Y PRECAUCIONES DE SEGURIDAD: NO se pare sobre este producto. Se puede caer y lesionarse. USE GAFAS Y GUANTES DE SEGURIDAD al cortar los zunchos. Estos pueden romperse RODAMIENTO DE BOLAS SERIE bruscamente y ocasionar sinos personales. USE GAFAS DE SEGURIDAD al quitar o volver a situar las correderas, Se podría resbalar fa herramienta y causar lesiones personales. Al mover el producto, no tire del mismo.
Para solicitar piezas de repuesto, llame al 1-800-659-7084 Consulte ef Dibujo de piezas de servicio para obtener un distado completo de las piezas de servicio QUINCALLERÍA: [Liv rN INSTALACIÓN DE LA MANIJA LATERAL: NOTA: Los agujeros en la manija son roscados y no se requiere usar tuercas para la instalación. + Fije la manija usando cuatro trifinios elipsis de 14-20 x 3/4. Apriete todos los tomillos. INSTALACIÓN DE LAS REDECILLAS: NOTA: Use la ayuda de foras personas para esta operación.