OPERATOR'S MANUAL ® 1700 PSi* 1.3 GPIVl ELECTRICPRESSUREWASHER WiTH HOSEREEL iViodelNo. 580.752850 HOURS: IVIon.- Fri. 8 a.m. to 5 p.m. (CT) WARNING Before using this product, read this manual and follow all Safety Rules and Operating Instructions. ADVERTENCIA Antes de utiiizar el producto, lea este manual y siga todas las Reglas de Seguridad e Instrucciones de Uso. ,, Safety ,, Assembly ,, Operation ,,Maintenance ,,Parts ,, EspaNol,p.
WARRANTY .......................................... 2 MAINTENANCE.................................... REPAIR PROTECTIONAGREEMENT........................ 2 STORAGE........................................... SAFETYRULES...................................... 3-4 FEATURESAND CONTROLS.............................. 5 ASSEMBLY........................................ 6-11 OPERATION ...................................... 11-13 SPECIFICATIONS.....................................
Read this pressurewasher. manual carefully and become familiar with your Knowits applications, its limitations, and any hazards involved. _. WARNING Risk of electrocution. Contacting both *_¢ importantSafety information power conductors, at the same time could .electricshock or burn resulting in death or cause serious injury. , Connectonly to a properly grounded outlet. DONOT remove ground pin from plug. Safety Symbols and Meanings , inspect cord before each use, DONOT use if cord is damaged.
_, WARNING Riskofeyeorbodilyinjury.Spray could i,_ internal resulting inserious injury. splash bharm ack,propel objects or cause • Always wearindirect vented (chemical splash) safety goggles marked tocomply withANSIZ87.1whenusing orinvicinityofthisequipment. NEVER substitute safety glasses ordry-condition goggles forindirect vented safety goggles. DONOTallowCHILDREN tooperate theelectric pressure washer. • Keep operating areaclearofallpersons. • inspect highpressure hosebefore eachuse.
KNOWYOURPRESSUREWASHER Read the Operator's Manual rules beforetooperating your pressure Comparethe illustrations with and yoursafety pressure washer familiarize yourself with washer. the locations of various controls and adjustments. Savethis manual for future reference. A - Spray Gun -- Controls the application of water onto cleaning surface with trigger device, includes trigger lock. H - Accessory Tray -- Provides convenient storage for standard and optional accessories.
Your electric pressure washer requires some assembly but is quickly ready for use If you have any problemswith the assembly of your pressurewasher, please caii the pressurewasher heJpJine at 1=800-222-3136. ASSEMBLINGPRESSUREWASHER Your Craftsman pressure washer will need assembly before operation: 1. Fill out and send in registration card. 2. Assemble main unit. UNPACKTHEPRESSUREWASHER 3. Assemble hose reel. 1. Removeeverything from carton. 4. Lubricate O-rings. 2.
Assemble Main Unit 1. Slide wheel shafts (A) into holes at sides of main unit (F). Wheels are installed correctly when you hear a CLICKand they are securely in place. . . 2. install decorative shield (B) if equipped, and secure using two screws. . NOTICE As the screws are turned in, they will break through the front of the unit allowing you to secure the decorative shield. Slide the handle (C) into the slots at top of main unit. install two (2) screws to secure the handle to the main unit.
Assernble Hose Reel 3. Place hose reel assembly (C) into slots of handle (B). When performing the following assembly procedures, pay close attention to the illustration at the bottom of this page. 4. Place large retainer (E) on right side of hose reel shaft as shown, and secure using two screws. Placesmall retainer (F) on left side of hose reel shaft as shown, and secure using two screws. NOTICE The handle is shown removed from the unit for clarity. 1.
LubricateO-Rings Lubricate all connectionsshown below, following these instructions: Lubrication of o-rings is extremely important for installation and operation. The use of a lubricant (petroleum or synthetic grease) during assembly helps seat o-rings properly and provides an improved seal. It also helps protect the o-ring from damage by abrasion, pinching or cutting and extends the life of the o-ring. 1. inspect and clean connecting surfaces prior to lubrication and assembly.
ConnectHosesand Water Supply . NOTICE Use ONLYcold water (less than 100°F). 1. Attach garden hose (50 ft. / 15.24 m maximum) to water supply. Attach opposite end of high pressure hose to the spray gun. Press red button (F) on spray gun, then insert end of high pressure hose (G) into gun until it SNAPSinto place. Releasethe red button and make sure connection is secure. 2. Run water through garden hose for 30 seconds to flush the hose of debris. Turn off water. 3.
. HOWTO USEYOURPRESSUREWASHER Slide the foam lance (Q) onto the adjustable fan jet wand (R). Apply further inward pressure to wand until you hear a CLICKand the locking tab (S) falls into place over the lip (T) of the wand. Tug on foam lance to make sure it is securely in place. if you have any problems operating your pressure washer, pleasecall the pressure washer helpline at 1-800-222-3136. Howto Start Your ElectricPressure Washer A WARNING Risk of eye injury.
. Plug electrical power cord into an electrical circuit rated for 120 Volts AC at 15 Amps that is properly installed and grounded in accordance with all local codes and ordinances. The indicator light on the GFCIshould appear. Howto Stop YourElectricPressureWasher The electric pressure washer motor runs only when the trigger is engaged.To stop the electric pressure washer and turn off the motor: 1. Releasespray gun trigger. 2. Press the master ON/OFFswitch to the OFF(0) position.
To adjust detergent mixture (point wand nozzle away from ApplyingDetergent you): _, WARNING Chemical Burn Hazard. " in death, serious injury and/or property damage. * Always wear indirect vented (chemical splash) safety goggles marked to comply with ANSi Z87.1 when using chemicals. * No detergent dispensed -- Turn spray adjustment barrel (C) fully clockwise. * IVlostdetergent dispensed -- Turn spray adjustment barrel (C) to center position.
PRODUCTSPECIFICATIONS OWNER'SRESPONSIBILITIES PressureWasherSpecifications GeneralRecommendations Outlet Pressure ............... 1700 PSi (117.2 BARS)* Flow Rate ....................... 1.3 GPM (4.9 LPM)* Detergent Mix ................. See MFR's instructions Water Supply Temperature.... Not to exceed IO0°F (38°C) Motor ........................ Universal (brush) Type RatedVoltage .......................... 120 Volts AC Current ................................. 12.
Check and Clean Water Inlet Screen NozzleMaintenance Remove water inlet coupling (A). Then remove water inlet screen (B) from the unit's water inlet (C) using a needle nose pliers. Water inlet is located at bottom front of unit. Examine water inlet screen. If the screen is dirty, clean with a small brush and water, if the screen is damaged, replace it. Excessivepump pressure can cause a pulsing sensation felt while squeezing the spray gun trigger.
AFTEREACHUSE Water should not remain in the unit for long periods of time. Sediments or minerals can deposit on pump parts and "freeze" pump action. Follow these procedures after every use: 1. Turn off water supply, point gun in a safe direction, press trigger lock button and squeezetrigger to relieve trapped pressure. 2. Disconnect garden hose from the water supply and the electric pressure washer. 3. Disconnect hose from spray gun and high pressure outlet on pump. Drain water from hose, gun, and wand.
WINTEROR LONGTERMSTORAGE Protectingthe Pump Water should not remain in the unit for long periods of time. Sediments or minerals can deposit on pump parts and "freeze" pump action. To protect the pump from damage caused by mineral deposits or freezing, use PumpSaver, Model 6039, to treat pump. This prevents freeze damageand lubricates plunger and seals. Initial Storage Procedures NOTICE PumpSaver is available as an optional accessory, it is not included with the electric pressure washer.
ProbJern Cause Correction 1. Water inlet is blocked. 1. Clearinlet, 2. inadequatewater supply. 2. Provide adequatewater flow. 3. Garden hose is kinked or leaking. 3. Straighten garden hose or replace if leaking. 4. Checkand clean water inlet screen. Pump has following problems:failure to producepressure, erratic pressure, 4. Cloggedwater inlet screen. chattering, loss of pressure, low water 5. Water supply is over IO0°F (38°C). voJurne. 6. High pressure hose is blocked or leaks. 7.
CRAFTSMAN1700 PSi ElectricPressure Washer 580.752850 ExplodedView and Parts List . 2 / .......
GARANTfA .......................................... 22 ESPECIFICACIONES ................................... 34 ACUERDO DEPROTECCION DEREPARACION ............... 22 MANTENIMIENTO .................................. 34-36 NORMAS DESEGURIDAD ........................... 23-24 ALMACENAM lENTO ................................... 37 CARACTERiSTICAS YCONTROLES ....................... 25 RESOLUCI6N DEPROBLEMAS .......................... 38 ENSAMBLAJE ..................................... 26-31 NOTAS .................
ADVERTENCIARiesgo de eiectrocuci6n. Poner en Lea esle manual delenidarnenley farniliaricese la lirnpiadora a presi6n eldclrica. Conozca sus con aplicaciones, sus lirnitaciones y todo pelioro asociado. _¢ energia provocar una descarga ei6ctrica de o ontactopodria al mismo tiempo ambos conductores incendio que causen muertes o lesiones graves. • Conectarlasolo a un toma corriente con una buena descarga a tierra. NOquite el terminal de tierra del enchufe.
,A ADVERTENCIA Riesgo de lesiones oculares o ._ Ol._ ADVERTENCIA Peligro de quemaduras quimicas .'!;;;;iiiii_ I ._ _' " objetos o provocar _ empujar corporaies. La pistoia puededa_os salpicar, internos que ocasionen una lesi6n grave. * Cuandoutiiice o est6 cerca de este dispositivo, col6quese gafas de seguridad con ventilaci6n indirecta (salpicadura quimica) que cumplan con ia disposici6n ANSi Z87.1.
CONOZCASU LliViPIADORA A PRESI( N Lea el IVlanualdel usuarioy las norrnas presi6n de seguridad antes de utilizar la la ubicaci6n Iirnpiadoraa presi6n. Compare los dibujos con la Nmpiadoraa para famiNarizarsecon de los distintos controles y ajustes. Guardeeste manual para consultas futuras. A- Pistola pulverizadora:controla ia aplicaci6n de agua sobre la superficie per limpiar con un gatillo. Incluye traba de gatiNo.
iViONTAJEDELA LIIViPIADORA A PRESION Ser_ necesario que monte la limpiadora a presi6n, pero esto no le iievar_ mucho tiempo. Antes de utilizarla, tendr_ que montar la limpiadora a presi6n Craftsman: Si tiene alg_n problernapara rnontarla limpiadora a presi6n, p6ngase en contactocon la Ifnea de ayuda de limpiadoras a presi6n Ilamando al 1-800-222-3136. 1. Lleney envie la tarjeta de registro. 2. Monte la unidad principal. DESEIViBALE LA LIIViPIADORA A PRESI6N 3. Monte el carrete de la manguera. 1.
3. Coloque la manija (C) en las ranuras en la parte superior de la unidad principal. Coloque dos (2) tornillos para fijar la manija a la unidad principal. 4. Coloque la bandeja para accesorios (B) en las ranuras que se encuentran en la parte trasera de la unidad principal. Coloque dos (2) tornillos para fijar la bandeja para accesorios en la unidad principal. IVlontajede la unidadprincipal 1. Deslice los ejes de las ruedas (A) hasta los agujeros a los lados de la unidad principal (F).
Arrneel carrete de la rnanguera , AI realizar los siguientes procedimientos de montaje, preste atenciOna los gr_ficos que aparecen al final de esta p_gina. Coloqueel carrete de la manguera armado (C) en las ranuras de la manija (D). 4. Coloqueel aro de tope m_s grande (E) sobre ei lado derecho del eje del carrete de ia manguera, tal como se muestra, y asegOrelocon dos tomillos.
Lubriquelas juntast6ricas Lubriquetodas las conexiones moslradas debajo. Para clio, siga estas instrucciones: La lubricaci6n de las juntas t6ricas es extremadamente importante para la instaiaci6n y el funcionamiento. El uso de un lubricante (grasa lubricante o sint6tica) durante ei montaje ayuda a que ias juntas t6ricas se asienten correctamentey ofrece un mejor seiiado. Tambi6n ayuda a evitar que la junta t6rica resulte da_ada pot abrasi6n, pellizcado o cortes, y aumenta la vida Otil de la junta t6rica.
Conectelas mangueras y el suministrode agua , AV/SO SOLO use agua fria (menos de 100 °F/38 °C). 1. Conecteuna manguera para jardin (m_ximo: 50 ft/15,24 m) al suministro de agua. 2. Dejecorrer agua por la manguera para jardin durante 30 segundos para limpiar la suciedad. Desconecteel agua. Coioqueel extremo opuesto de la manguera a alta presi6n en ia pistola pulverizadora. Presioneel bot6n rojo (F) de la pistola pulverizadora.
, COIViOUSARLA LliViPIADORA A PRESION Coloque la lanza de espuma (Q) en la varilla del ventilador ajustable (R). EjerzamAs presiOnsobre la varilla hasta oir un CLIO, luego la traba (S) estar_ en la posici0n correcta sobre el borde (T) de la varilla. Tire del lanza espuma para asegurarse de que est6 correctamente posicionado. Si tiene alg0n probiema para usar la limpiadora a presi6n, p6ngase en contacto con la linea de ayuda de limpiadoras a presi6n Ilamando al 1-800-222-3130.
. C6mo detener la limpiadoraa presi6nei6ctrica Enchufe el cable de energia en un circuito el6ctrico de 120 VCA a 15 A que est6 correctamente instaiado y conectado a tierra de acuerdo con las normas y disposiciones locales. Deberia encenderse ia luz del indicador en el GFCI. Ei motor de la limpiadora a presiOnel6ctrica solo funciona cuando est_ presionado el gatillo. Para detener la limpiadora a presiOnel6ctrica y apagar el motor: 1. Suelte el gatillo de la pistola pulverizadora. 2.
• • Si acerca demasiado la boquilla, especialmente en el uso a alta presi6n, podria Ilegar a da_ar la superficie que est_ limpiando. AI limpiar neum_ticos, no se acerquea m_s de 6 in AFISO Debeconectar todas las mangueras antes de arrancar la limpiadora a presiOnel6ctrica. 7. Arranque la limpiadora a presi6n el6ctrica seg0n las indicaciones de C6mo arrancar la limpiadora a presi6n eldctrica. (15 ore).
ESPECIFICACIONES DELPRODUCTO RESPONSABILIDADES DELPROPIETARIO Especificacionesde la limpiadoraa presi6n Recomendaciones Generales Presi6n de salida ............. 1700 PSI (117,2 BARES)* Velocidad de flujo ................. 1,3 GPM (4,9 LPM)* Mezclade detergente ....... Ver las instrucciones de MFR Temperatura del suministro de agua .... No debe superar los Un mantenimiento regular mejorar_ el funcionamiento y extender_ la vida 0til de la limpiadora a presi6n.
Verificaci6ny limpieza de la pantalla de entrada de agua iVlantenimientode la boquilla Una presi6n excesiva en la bomba puede provocar una sensaci6n de pulsaci6n al apretar el gatillo de la pistola pulverizadora. Ei principal motivo de que haya presi6n excesiva en la bomba es que la boquilla est6 tapada o limitada pot materiales externos como la tierra. Una boquilla tapada podria hacer que ia bomba se encienday se apague, o que no se encienda, incluso cuando haya algo de flujo.
3. Desconectela manguera de la pistoia pulverizadoray de la saiida de alta presiOnde la bomba. Dreneei agua de la manguera, de la pistola y de la varilla. Utilice un trapo para limpiar la manguera. iVlantenimiento de la bomba y del motor La bombay el motor de la Nmpiadoraa presiOnel6ctrica no requieren mantenimiento. Ambos conjuntos est_n prelubricados y sellados, y no es necesario volver a lubricarlos. 4. Dreneel agua de la bomba.
ALIViACENAiViiEHTO ENIHViERNO0 DURAHTELARGOSPERJODOS Protecci6n de la bomba Para proteger ia bomba de da_os provocados por dep6sitos de mineraies o congelamiento, utiiice la PumpSaver, modelo 6039, para tratar la bomba. Esto evita da_os por congelamiento y lubrica el pist6n y los cierres. El agua no deberia permanecer durante mucho tiempo en la unidad. Los sedimentos o los minerales pueden depositarse en las piezas de la bombay "congelar" su funcionamiento.
Problema CalJsa Soluci6n 1. La entrada de agua est_ bloqueada. 1. Libere la entrada. 2. Suministro de agua inadecuado. 2. Proporcione un flujo de agua adecuado. 3. La manguera para jardin est_ enroscada o tiene p6rdidas. 3. Estire ia manguera para jardin o reempl_celasi pierde. 4. Revise la pantalla de entrada de La bomba tiene los siguienles agua. problernas:no genera presi6n, presi6n err_tica, vibraci6n, p_rdida de 5. El suministro de agua supera los 100 °F (38 °C). presi6n, bajo volurnende aoua.
Your Home For troubleshooting, product manuals and expert advice: www.managemylife.com For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters.