Owner's Manual ICRRFTSMRN+I HIGH PRESSURE WASHER 6.5 HORSEPOWER 2550 PSI 2.5 GPM Model No. 580.752550 HOURS: CAUTION: Mon.- FrL 8 a.m. to 5 p.m. (CT) Before using this product, read this manual and follow all Safety Rules and Operating Instructions. SEARS, ROEBUCK and CO., Hoffman Estates, visit our Craftsman website: www.sears.com/craftsman Part No. 192059 Draft 3 (05127/2003) IL 60179 U.S.A.
WARRANTY ................................... 2 SAFETY RULES .............................. KNOW YOUR PRESSURE WASHER ................ 6-8 OPERATION ................................ 9-11 ............................ SPECIFICATIONS REPLACEMENT 18 & 27 .......................... 19 PARTS ...................... 20-25 EMISSION CONTROL WARRANTY ................ 26 ESPANOL ................................. 12 WARRANTY 16-17 ................................. TROUBLESHOOTING 12-15 ...........
In the State of California a spark arrester is required 3y law (Section 4442 of the California Public Resources Code). Other states may have similar laws. ;ederal taws apply on federal lands. If you equip the "nuffler with a spark arrester, it must be maintained in _=ffective working order.You can order a spark arrester _hrough your authorized Sears service dealer.
WARNING CAUTION DO NOT secure spray gun in open position. DO NOT wear loose clothing, jewelry or anything that may be caught in starter or other rotating parts. DO NOT leave spray gun unattended while machine is running. Tie up long hair and remove jewelry. NEVER use a spray gun which does not have a trigger lock or trigger guard in place and in working order. Always be certain spray gun, nozzles and accessories are correctly attached.
KNOW YOUR PRESSURE WASHER Read the owner's manual and safety rules before operating your pressure washer. Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.
Yourpressurewasherrequiressomeassemblyandis readyforuseonlyafterit hasbeenproperlyserviced withthe recommended oilandfuel. Attach 1. If you have any problems with the assembly of your pressure washer, please call the pressure washer helpline at 1-800-222-3136. Handle Place handle assembly onto handle supports connected to main unit. Make sure holes in handle align with holes on handle supports.
Add Fuel Engine Oil Add IMPORTANT: Any attempt to crank or start the engine before it has been properly serviced with the recommended oil may result in an engine failure. ,_ NOTE: When adding oil to the engine crankcase, use only high quality detergent oil rated with API service classification SF, SG, SH, SJ or higher rated SAE 30 weight. DO NOT use special additives. 1. Choose a viscosity according to table below. WARNINGI fill fuel tank is indoors.
Connect Hose and Water Supply to Pump CAUTION IMPORTANT: To avoid pump damage, you must assemble the nozzle extension to the spray gun and attach all hoses before you start the engine. 1. Uncoil high pressure hose and attach one end of hose to base of spray gun. Tighten by hand. • Damage to equipment resulting from failure to follow this instruction willvoid warranty. 7. Turn ON water and squeeze trigger on spray gun to purge pump system of air and impurities. WARNING 2.
HOW TO USE YOUR PRESSURE WASHER 9. If you have any problems operating your pressure washer, please call the pressure washer hetpline at 1-800-222-3136. To Start Your Pressure Fuel Valve shown in "On" position Washer To start your engine-powered pressure washer for the first time, follow these instructions step-by-step. This starting information also applies whenever you start the engine after you have let the pressure washer sit idle for at least a day. 1.
How To Use the Adjustable Nozzle Twisting nozzle adjusts spray pattern from a narrow pattern to a fan pattern. 3. You now should know how to START your pressure washer and how to STOP it. The information in this section will tell you how to adjust the spray pattern and apply detergent or other cleaning chemicals. CAUTION NEVER adjust spray patternwhen spraying. NEVER put hands in front of nozzle to adjust spray pattern.
6. Applydetergenttoa drysurface,startingfrom 3. Apply a high pressure spray to a small area, then bottomandworkingup. check surface for damage. If no damage is found, it is okay to continue cleaning. 7. Allowdetergentto"soakin"for3-5minutesbefore rinsing.Reapplyasneededtokeepsurfacewet. 4. Start at top of area to be rinsed, working down with same overlapping strokes as you used for 8. Forwashing,startat lowerportionofareato be washing and applying detergent.
OWNER'S RESPONSIBILITIES Follow the hourly or calendar intervals, whichever occurs first. More frequent service is required when operating in adverse conditions noted below.
PRESSURE WASHER MAINTENANCE Check and Clean Inlet Purge Pump of Air and Contaminants To remove air from the pump, follow these steps: 1. Set up pressure washer as described in "Assembling Your Pressure Washer" section and connect water supply. Screen Examine garden hose inlet screen. Clean if it is clogged or replace if it is torn. 2. Check High Pressure Hose High pressure hoses can develop leaks from wear, kinking, or abuse. Inspect hose before each use.
5. Usinga gardenhose,removeadditionaldebrisby backflushingwaterthroughnozzleextension. Backflushbetween30to 60seconds. Turn adjustable nozzleextensiontostreamsprayand movenozzlefromlowto highwhileflushing. 3. Tilt pressure washer to drain oil into an approved container until it drips slowly from pump. 4. Tilt pressure washer in opposite direction and empty premeasured pump oil bottle into same opening (a small funnel may be helpful). 5. Install black pump oil cap and tighten firmly. 6.
Service Air Cleaner 2. Remove and inspect spark plug. Your engine will not run properly and may be damaged if you run it with a dirty air cleaner. 3. Replace spark plug if electrodes are worn, or if insulator is cracked or chipped. Service the air cleaner once every 100 hours of operation or once each year, whichever comes first. Service more often if operating under dirty or dusty conditions. Replacements are available at your local Sears service center. 4.
AFTER EACH USE WINTER Water should not remain in the unit for long periods of time. Sediments or minerals can deposit on pump parts and "freeze" pump action. Follow these procedures after every use: 1. Flush detergent siphoning tube by placing the filter into a pail of clean water while running pressure washer in low pressure mode (adjustable nozzle in the forward position). Flush for one to two minutes. 2. Shut off engine, let it cool, then remove all hoses. 3.
LONG TERM STORAGE Oil It is important to prevent gum deposits from forming in essential fuel system parts such as the carburetor, fuel tilter, fuel hose or tank during storage. Also, experience indicates that alcohol-blended fuels (called gasohol, ethanol or methanol) can attract moisture, which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. Install spark plug. DO NOT connect spark plug wire.
Problem Correction Cause Pump has following problems: failure to produce pressure, erratic pressure, chattering, loss of pressure, low water volume. Detergent fails to mix with spray. Engine runs good at no-load but "bogs" when load is added. 1. Nozzle in low pressure mode. 1. 2. 3. 4. 5. Water inlet is blocked. Inadequate water supply. Inlet hose is kinked or leaking. Clogged inlet hose strainer. 2. 3. 4. 5. Water supply is over 100°F. High pressure hose is blocked or leaks. 8. Gun leaks. 9.
CRAFTSMAN Main Unit -- 2550 PSI Pressure Exploded Washer 580.
CRAFTSMAN 2550 PSI Pressure Washer Pump -- Exploded View and Parts List 580.
ENGINE, 6.5 HP, Briggs and Stratton, 120412 - Exploded View 51 3O6 307 718 415 22_ 21 S2A_ _r REQUIRES SPECIAL TOOLS TO INSTALL. SEE REPAIR INSTRUCTION MANUAL.
ENGINE, 6.
ENGINE, 6.5 HP, Briggs and Stratton, 120412 - Exploded View 1005 281 2221 663 427_ 271_ 334 _ 62_ 851 45e I 689_ J .
ENGINE, 6.
Sears, Roebuck and Co., U.S.A. (Sears), the California Air Resources Board (CARB) the United States Environmental Protection Agency (U.S.
GARANTIA.............................. INSTRUCCIONES DESEGURIDAD ......... CONOZCA SUMAQUINA LAVADORA DEPRESION............................ MONTAJE............................ OPERAClON.......................... MANTENIMIENTO ...................... GARANTIA LIMITADA 28 28-30 ESPECIFICACIONES ...................... 38 ALMACENAMIENTO .................... 42-43 NOTAS............................. 44 &47 REPARACION DEDAIXlOS REPUESTOS ....... 45 GARANTIA DELCONTROL DEEMISIONES.... 46 COMOORDENARPARTES.
-n el estado de California es obligatorio, segt_n la ley, el uso Je apagachispas (Secci6n 4442 del C6digo de Recursos 3t_blicos de California). Otros estados pueden tener leyes _imilares. Las leyes federales se aplican en tierras 'ederales. Si equipa el silenciador con un apagachispas, .=stedeber_ ser mantenido en buenas condiciones de :rabajo. Usted puede ordenar el apagachispas a trav6s de _u distribuidor de servicio autorizado Sears.
ADVERTENCIA PRECAUCION NO asegure la pistola de rociado en la posici6n (open = able[to). NO use ropa suelta, joyas o elementos que puedan quedar atrapados en el arranque o en otras pa[tes rotatorias. NO abandone la pistola de rociado cuando la maquina est6 en funcionamiento. Ate para arriba el pelo largo y quite la joyerfa. NUNCA utilice una pistola de rociado que no tenga un seguro para gatil]o o protecci6n para gatillo en su lugar yen buenas condiciones.
CONOZCA SU MAQUINA LAVADORA DE PRESION Lea el manual del propietario y las reglas de seguridad antes de poner en marcha su m&quina lavadora a presibn. Compare las ilustraciones con su m_quina lavadora a presi6n para familiarizarse con las ubicaciones de los diferentes controles y ajustes.
Su m_quina lavadora a presi6n requiere de cierto ensamble y estar_ lista para ser usada t]nicamente despu6s de haber depositado el combustible y el aceite recomendado. Si tiene problemas con el ensamble de su mbquina lavadora a presibn, game a la linea de ayuda de la mbquina lavadora a presibn al 1-800-222-3136. 4. Conecte la manguera de alta presi6n a la pistola de rociado y a la bomba. 5. Conecte el suministro de agua a la bomba. Fijar el Manubrio 1.
1. Seleccione una viscosidad de acuerdo a la tabla siguiente. Use combustible limpio y almac6nelo en recipientes cubiertos, limpios y aprobados. Utilice embudos limpios. NUNCA utilice gasolina "vieja" dejada de la estaci6n anterior o gasolina almacenada por periodos de tiempo prolongados. **ram Limpie el _rea alrededor de la tapa de Ilenado del combustible, retire la tapa. ,wT _f _c -_0 -2'o 4b b i 1'0 2b _b Agregue lentamente gasolina regular "SIN PLOMO" al tanque de combustible.
2. Conecte el otro extremo de la manguera de alta presi6n a la salida de alta presi6n de la bomba. Apriete con la mano. 6, ABRA el suministo del agua y abra la v_lvula de suministro para purgar la sistema de bomba de aire y impureza. ADVERTENCIA Siempre use protecci6n para los ojos cuando utilice este equipo o cuando est6 cerca do donde se este usando el equipo. 3, Antes de que conecte la manguera de jard{n a la entrada de agua, inspeccione el colador de la entrada.
C6MO USAR SU MAQUINA LAVADORA A PRESI )N 9. Si tiene problemas operando su m_quina lavadora a presi6n, por favor Ilame a la linea de ayuda para m_quinas ]avadoras a presi6n al 1-800-222-3136, Cbmo Darle Arranque Lavadora a Presibn Combustible V_lvula Mostrado en "Encendido" ("On") la Posici6n a su M_quina ( Para darle arranque a su m_quina lavadora a presi6n movida a motor por primera vez, siga estas instrucciones paso a paso.
Cbmo Detener Presibn su M_quina Lavadora a 3. El patr6n de rociado se ajusta de un patr6n angosto a un patr6n en abanico girando ]a boqui]Ia. Mueva la palanca de la v&lvula de regulaci6n a la posici6n "Stop" ("Parado"). Apriete el gatillo de la pistola de rociado para eliminar la presi6n de la manguera. NOTA: Observar_ una pequeSa cant]dad de agua cuando el]mine ]a presi6n. Cbmo Usar la Boquilla Ajustable Usted ya debe saber como darIe ARRANQUE a su m_quina lavadora a presi6n y como DETENERLA.
6, Aplique el detergente sobre la superficie seca, comenzando en la parte inferior y dirigi6ndose hacia arriba. 7. Permita que el detergente "penetre" de 3 a 5 minutos antes de enjuagar. Vuelva a aplicarlo cuando sea necesario para evitar que la superficie se seque. 8. Para lavar, comience en la parte inferior del _rea que est_ lavando y dirfjase hacia arriba, utilizando movimientos largos, parejos y superpuestos.
RESPONSABILIDADES DEL PROPIETARIO Siga el programa de mantenimiento segtTn el nemero de horas o segen el calendario, Io que suceda primero. Se requiere de servicio con mayor frecuencia cuando opere la unidad en las condiciones adversas descritas a continuaci6n.
ANTES DE CADA USO 1. Revise el nivel de aceite del motor. 2. Revise si existen daSos en el colador de la entrada de agua. 3. Revise si existen fugas en la manguera de alta presi6n. 4. Revise si existen daSos en los filtros de quimicos. 5. Revise si existen fugas en el conjunto de la vara y pistola. 6.
3. Quite el en el filtro de la linea del otro fin de la extensi6n de boquilla. 4, Use un pequeSo sujeta papeles para liberar cualquier material extraSo que est6 tapando la boquilla. Tap6n de Aceite Introduzca el alambre dentro de la boquilla y girelo hacia los lados, hacia adelante y atr_s hasta despejar la obstrucci6n. 5, Usando una manguera de jardin, remueva cualquier desecho adicional, poniendo agua en la extensi6n de la boquilla. Haga 6sto de 30 a 60 segundos.
4. Reinstale en su lugar la tapa del drenaje. Remueva la tapa del Ilenado de aceite. 5. Llene al punto de sobrellenado Ilenado de aceite. 6. Reinstale en su lugar la tapa del Ilenado de aceite y apri6tela firmemente. 7. Limpie los residuos de aceite. 8. Conecte de nuevo alambre de bujia al bujia. Servicio del Depurador Remplace Remplace la bujia anualmente o cada 100 horas de operaci6n.
DESPUES DE CADA USO ALMACENAMIENTO INVIERNO No deber_ haber agua en la unidad por largos periodos de tiempo, Los sedimentos de minerales se pueden depositar en partes de la bombay "congelar" su funcionamiento, Lleve a cabo estos procedimientos deepu6s de cada uso: 1, Lave el tubo de succi6n de detergente colocando el filtro en un balde de agua limpia al mismo tiempo que hace funcionar la m_quina lavadora a preei6n en el modo de baja presi6n (boquilla ajustable en posici6n delantera).
ALMACENAMIENTO PROLONGADO Aceite el Didmetro Es importante evitar la formaci6n de dep6sitos de goma en ]as partes esenciales del sistema del combustible tales como carburador, filtro del combustible, manguera o tanque del combustible durante el almacenamiento. Tambi6n, la experiencia indica que los combustibles con mezclas de alcohol (llamados gasohol, etanol o metanol) pueden atraer la humedad, Io que Ileva a la separaci6n y formaci6n de _cidos durante el almacenamiento.
Problema Causa Solucibn 1, 1. 2, 3, La boquilla est_ en el modo de baja presi6n, La entrada de agua est_ bloqueada, Suministro de agua inadecuado. 4, La manguera de entrada est& doblada o presenta fugas. 5, El colador de ]a manguera de la entrada de agua est_ tapado, 6, El suministro de agua esta por encima de los 100-°F. 7, La manguera de alta presi6n est& bloqueada o presenta fugas. 8, La pistola presenta fugas. 9, La boquilla est_ obstruida, 10. Bomba defectuosa.
Sears, Roebuck and Co., U.S.A. (Sears), California Air Resources Board (Consejo de Recursos sobre el Aire de California, CARB, por sus siglas en inglds) y United States Environmental Protection Agency (Agencia de Proteccibn Ambiental de EE.UU., EPA, por sus siglas en inglds).
Get it fixed, at your home or ours! Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold itl For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME (1-800-469-4663) www.sears.com ® Anytime, day or night (U.S.A. and Canada) www.