Operator's iVlanual ® 2000 PSi 1.9 GPM Model No. 500.752110 CUSTOMERHELPLINE PRESSURE WASHER ,_ HOURS: Non. - Fri. 8 a.m. to 5 p.m. (CT) WAReleG Before using this product, read this manual and follow all Safety Rules and Operating Instructions. I_ I7ADVERTENCJA Antes de utilizar el producto, lea este manual y siga todas las Reglas de Seguridad e Instrucciones de Uso. • • • • • Safety Assembly Operation Maintenance Parts ,, Espafiol, p. 32 Sears, Roebuckand Co., RoffmanEstates,IL 60179 U.S.A.
WARRANTY .......................................... 2 SAFETYRULES...................................... 2-5 FEATURESAND CONTROLS.............................. 6 ASSEMBLY ......................................... OPERATION....................................... 7-9 10-13 SPECIFICATIONS..................................... MAINTENANCE.................................... 14 15-19 STORAGE........................................... 20 TROUBLESHOOTING..................................
WARHJNG The engine exhaustfrom this productcontains chemicalsknownto the State of California to cause cancer,birthdefects, or otherreproductiveharm. WARHJHG Running engine gives off carbon monoxide, an odorless, colorless, poison gas. Breathing carbon monoxide can cause headache, _ atigue, dizziness, nausea, fainting orvomiting, death. confusion, seizures, Some chemicals or detergents may be harmful if inhaled or ingested, causing severe nausea, fainting, or poisoning. * OperatepressurewasherONLYoutdoors.
WARHJHG WARHIHG Starter cord kickback (rapid retraction) can result in bodily injury. Kickback will pull hand and arm _,_.< The high pressure stream of water that this equipment produces can cut through skin and its toward engine faster than you can let go. Broken bones, fractures, bruises, or sprains could result. • NEVERpull starter cord without first relieving spray gun pressure. . When starting engine, pull cord slowly until resistance is felt and then pull rapidly to avoid kickback.
WARHJHG NOTICE High pressure spray may damage fragile items including lass. Starter hair, and other rotating parts can entangle hands, clothing, or accessories. * NEVERoperate pressure washer without protective housing or covers. * DO NOTwear loose clothing, jewelry or anything that may be caught in the starter or other rotating parts. * Tie up long hair and remove jewelry. WARNING Risk of eye injury. " _ JSpray can splash back or propel objects.
KNOWYOURPRESSUREWASHER _Head Compare the the Operator'sManual rules beforetooperatingyour pressurewasher. illustrations with and yoursafety pressure washer familiarize yourself with the locations of various controls and adjustments. Savethis manual for future reference. A - Recoil Starter -- Used for starting the engine manually. Items Net Shown: B - Oil Fill/Dipstick -- Check, add and drain engine oil here. Air Filter -- Protects engine by filtering dust and debris out of intake air.
Your pressure washer requires some assembly and is ready for use only after it has been properly serviced with the recommended oil and fuel. Attach Handle 1. Placehandle (A) onto base (B). Make sure holes in handle align with holes on base. 2. Insert carriage bolts (C) through holes from outside of unit and attach a plastic knob (D) from inside of unit. Tighten by hand. If you have any problemswith the assemblyof your pressurewasher, please call the pressurewasher heipline at 1-800-222-3135.
Add Engine Oil WARHIHG 1. Place pressure washer on a flat, ]eve]surface. 2. Cleanarea around oil fill and remove yellow oil fill cap/dipstick. NOTE:See Oil Recommendations in Maintenancesection. Verify provided oil bottle is the correct viscosity for current ambient temperature. 3. Using oil funnel (optional), slowly pour contents of provided oil bottle into oil fill opening. NOTICE Improper treatment of pressure washer can damage it and shorten its life.
Connect Hose and Water Supply to Pump NOTICE I DO NOT run the pump without the water supply connected _nd turned on. ______ I* Damageto equipmentresultingfrom failureto follow this h instructionwill void warranty. NOTE:Remove and discard the shipping caps from the pump's high pressure outlet and water inlet before attaching hoses• 1. Uncoil high pressure hose and attach one end of hose to base of spray gun. Tighten by hand• 4.
HOWTO USEYOUR PRESSUREWASHER To Start Your Pressure Washer If you haveany problems operating your pressure washer, please call the pressure washer helpline at 1-800-222-3136. To start your engine-powered pressure washer for the first time, follow these instructions step-by-step. This information also applies whenever you start the engine after you have let the pressure washer sit idle for at least a day. Pressure Washer Location PressureWasherClearance 1.
8. Movethrottleleverto"Fast"position (A),shownasa rabbit. Tostarttheengineforthe very first 9. time: Push primer bulb firmly 5 times, waiting 2 seconds between each push. To start engine thereafter: 9. Press primer bulb firmly 3 times, waiting 2 seconds between each push. For a warm engine, DONOT press primer bulb. IMPORTANT:Before starting the pressure washer, be sure /ou are wearing adequatesafety goggles. WARHIHG Starter cord kickback (rapid retraction) can result in bodily injury.
1. How to Stop Your Pressure Washer 1. Releasespray gun trigger and let engine idle for two minutes. 2. Move throttle to SLOWposition, then STOPposition (A). 3. ALWAYS point spray gun in a safe direction and squeeze spray gun trigger to release retained high water pressure. IMPORTANT:Spray gun traps high water pressure, even when engine is stopped and water is disconnected. Slide nozzle backward to achieve high pressure. Slide nozzle forward when you wish to adjust spray to low pressure mode.
NOTE:You can also stop detergent flow by removing detergent siphoning tube from container. Applying Detergent with Adjustable Hozzle CAUTION 2. Chemicals can cause bodily injury, and/or property damage. NEVERusecausticliquidwith pressurewasher. UseONLYpressurewashersafedetergents/soaps. Followall manufacturersinstructions. WARHIHG Kickback from To apply detergent, fellow these steps: 1. Review use of adjustable nozzle. 2. Prepare detergent solution as required by job. 3.
EHGINETECHNICALINFORMATIOH PRODUCTSPECIFICATIOHS This is a single cylinder, L-head, air cooled engine. It is a low emissions engine. Pressure Washer Specifications Outlet Pressure ........................... How Rate................................. In the State of California, Model 90000 engines are certified by the California Air Resources Board to meet emissions standards for 125 hours.
OWNER'SRESPONSIBILITIES Follow the hourly or calendar intervals,whichever occurs first. More frequent service is required when operating in adverse conditions noted below.
3. Placeo-ring into recess. Push o-ring snugly against in-line filter screen. Jlmproper treatment of pressure washer can damage it and _horten its life. __ .... 4. Assemble nozzle extension to spray gun, as described in Assembly section. DONOTinsertanyobjectsthroughcoolingslots. * Use a soft bristle brush to loosen caked on dirt, oil, etc. Hozzle Maintenance NOTICE , A pulsing sensation felt while squeezing the spray gun trigger may be caused by excessivepump pressure.
8. Reinstall orifice andin-linefilterintonozzle extension. Oil DONOTovertighten orificewithallenwrench. OiJRecommendations 9. Reconnect nozzle extension tospraygun. NOTE:Use a high quality detergent oil classified "For Service 10.Makesuregarden hoseis connected towaterinlet. SF, SG, SH, SJ" or higher. DO NOT use special additives. Check thathighpressure hoseisconnected tospraygun 1. Choosea viscosity according to the table below: andpump.Turnonwater. 11.
AddiegEngineOil Service Air Cleaner 1. Make sure pressure washer is on a level surface. 2. Check oil level as described in Checking Oil Level Your engine will not run properly and may be damaged if you run it with a dirty air cleaner. 3. If needed, slowly pour oil into oil fill opening to the "Full" mark on dipstick. DO NOToverfill. Service the air cleaner once every 25 hours of operation or once each year, whichever comes first. Service more often if operating under dirty or dusty conditions.
Spark Arrester Service AFTEREACHUSE Your engine is not factory-equipped with a spark arrester. In some areas, it is illegal to operate an engine without a spark arrester. Checklocal laws and regulations. A spark arrester is availablefrom your nearest Sears service center. If you need to order a spark arrester, please call 1-SOO-4-F,,IY-HOF,,IE (46g-4663). Water should not remain in the unit for long periods of time. Sediments or minerals can deposit on pump parts and "freeze" pump action.
WIHTERSTORAGE NOTICE You must protect your unit from freezing temperatures. Failureto do so will permanentlydamageyour pumpand renderyour unit inoperable. Freezedamageis not coveredunderwarranty. Change Off While engine is still warm, drain oil from crankcase. Refill with recommended grade. See ChangingEngine Oil. Oil Cylinder Bore * Removespark plug and pour about 1/2 ounce (15 m]) of clean engine oil into the cylinder. , Install spark plug and pull starter handle slowly to distribute oil.
Problem Pump has following problems:failure to producepressure, erratic pressure, chattering, loss of pressure, low water volume. Cause Correction 1. Nozzlein low pressure mode. 1. Pull nozzle backward for high pressure mode. 2. Water inlet is blocked. 2. Clear inlet. 3. Inadequatewater supply. 3. Provide adequatewater flow. 4. Inlet hose is kinked or leaking. 4. Straighten inlet hose, patch leak. 5. Clogged inlet hose strainer. 5. Checkand clean inlet hose strainer. 6.
CRAFTSMAH2000 PSi Pressure Washer 580.752110 Main Unit -- Exploded View 900_ j ......................
CRAFTSMAH2000 PSi Pressure Washer 580.
CRAFTSMAH2000 PSI Pressure Washer 580.
CRAFTSMAH2000 PSi Pressure Washer 580.752110 Pump -- Parts List Item 3 7 A B C D E F G H Part # 200274GS 190578GS 200298GS 200278GS 200279GS 200280GS 200281GS 200282GS 200283GS 189971GS Description PLUG,Elastic PiN KIT, CHECKVALVES KIT,WATERINLET KIT, CHEMICALINJECTION KIT, HIGH PRESSURESEALS KIT.
EHGIHE, Briggs & Stratton, 9T702 - Exploded View @ • 745_ s01 54 51 _o_ 51 5 718A o_:_ 11 1 24___ 868 36_ 1095 VALVEGASKETSET 306 15 @ 22_ 20 26 307
EHGIHE, Briggs & Stratton, 9T702 - Exploded View 365 _' 9°1 529 163 J 633 130 I 201_ 459 d_ 689O 356 1210 456 _ 597 & 332 334 455 190A¢_, 67O 300 "W" 836_ 305 @ 36{ 51 <3_ 535 534 t 23 358 ENGINEGASKETSET 7@ 9J 3_ 1630 %@ 27
EHGIHE, Briggs & Stratton, 9T702 - Parts List Item 1 2 3 4 5 7 8 9 10 11 12 13 15 16 20 22 23 24 25 25 26 26 27 28 29 32 33 34 35 36 37 37A 40 43 45 46 50 51 54 55 58 60 65 73 90 97 106 130 163 180 190 190A 200 201 209 211 222 Part # 699653 399269 299819S 698691 690386 698717 791781 695890 691666 691245 692218 691640 691680 692991 391483S 691662 690843 222698S 699657 792532 699658 792533 691588 699659 699655 691664 296676 296677 690520 690520 691209 690482 692194 698690 691762 691998 792388 792389 691111 6
Sears, Roebuckand Co., U.S.A. (Sears), the CaliforniaAir ResourcesBoard(CARD)and the UnitedStates EnvironmentaJProtectionAgency(U.S.EPA} EmissionsControlSystemWarrantyStatement (Owner'sDefect WarrantyRightsand Obligations) The California Air Resources Board (CARB), U.S. EPA and Sears are pleased to explain the Emissions Control System Warranty on your small offroad engine (SORE).
Emission information Enginesthat are certified to meet the California Air Resources Board (CARB) Tier 2 Emission Standards must display information regarding the Emissions Durability Period and Air Index. The engine manufacturer makesthis information availableto the consumer on emission labels. The engine emission label will indicate certification information.
GARANTIA .......................................... REGLASDE SEGURIDAD ............................ 32 MANTENIMIENTO .................................. 33-35 CARACTERiSTICASY CONTROLES....................... 46-51 ALMACENAMIENTO ................................... 52 36 REPARACIONDE DANOSREPUESTOS .................... 53 MONTAJE ........................................ 37-39 GARANTIADEL CONTROLDE EMISIONES ............... 54-55 OPERACION.......................................
ADVERTENCIA ADVERTENCJA El escape del motor de este preducto contiene eiementos quimicos recenocidos en el Estado de California per producir c_ncer,defectos de nacimiento La. gasolina y sus vapores son extremadamente inflamables y explosivos. g otros danes de ripe reproductive. severas e inclusive la muerte.
ADVERTEHCiA _,tk _, ADVERTEHCiA El retroceso (repliegue r_.pido) del cable del arrancador El chorro de agua a alta presi6n que este equipo puede producir produce,puedeatravesar lesiones. El retroceso impedir_ que el usuario suelte el cable a tiempo y tirar_, de su mano y brazo hacia el motor. Como resultado, podrian producirse contusiones o esguinces. piely los tejidos _odrian dar lugar a la amputaciOn de un miembro. ubcut_.
AVISO ADVERTEHCIA El rociado de alta presi6n puede dafiar elementos fr_.giles, incluyendoel vidrio. El arrancador las manos, el ypelo, otrasla piezas ropa, 0que los rotan accesorios. pueden enredar NO apunte la pistola de rociado al vidrio cuando est6 en el modo de rociado a chorro. • NUNCA utilice la limpiadora a presi6n sin sus carcasas o tapas de protecci6n. NUNCA apunte la pistola a plantas.
COHOZCASU MAQUIHA LIMPIADORAA PRESIOH !_!i_!] Lea eJ Manual deJOperarioy su laslimpiadoraa regias de segnridad antes de ponerencon rnarchasu lirnpiadoraa I................. Compare las ilustracionescon presi6n para familiarizarse las ubicaciones de los presi6n. diferentes controles y ajustes. Guarde este manual para referencias futuras. A - Arrancador de Retroceso -- Usado para arrancar el motor manualmente.
Sulimpiadora apresi6n requiere decierto ensamble yestar_, lista para serusado 8nicamente despu_s dehaber depositado el combustible yelaceite recomendado. Sitiene prohlemasconel ensamhledesu m;_quinalimpiaderaa Conecte el Manubrio 1. Coloque el manubrio (A) en la base (B). Aseo_rese de que los orificios en el manubrio est_n alineados con los orificios en los base. 2. Inserte el pernos del soporte (C) a trav_s de los orificios desde fuera de la unidad y sujete una perillas de pl_.
Agregue Aceite de Motor 1. Coloque la limpiadoraa presi0n en una superficie plana y nivelada. 2. Limpie la zona de alrededor del orificio de Ilenadode aceite y quite el tapOn amarillo. ADVERTEHCIA jLa gasolina y sus vapores son extremadamente inflamables y explosivos. NOTA:Consulte la secciOn Aceite, para ver las recomendaciones relativas al aceite. Compruebe que la botella de aceite suministrada tiene la viscosidad adecuada para la temperatura ambiente actual. 3.
Conecte la Manguera y e] Suministro de Agua a la Bomba 4. t IIVlPORTANTE:Hace NO agua de parar de siphon para el abastecimiento de agua. Use agua SOLOfria (menos que I O0°F). AVlS_......O0 NO haga funcionar la bomba si no tiene el suministro conectado y bierto. __ .... El daiio a lalimpiadora a presi6n,resultadode ladesatenci6na esta precauci6n,no ser_icubiertoperla garantia. 5. Conecte la manguera de jardin (no exceder 50 pies en la Iongitud) a la entrada del agua. Apriete con la mane.
COMOUSARSU LIMPIADORAA PRESIOH Para Porter en Marcha el Limpiadora a Presi_n Si tiene problemas con el funcionamiento de su m_.quinalimpiadora a presiOn,por favor Ilamea la lineade ayuda de la m_quina limpiadora a presi6n al 1-808-222-3136. Para darle arranque a su limpiadora a presiOn movido a motor por primera vez, siga estas instrucciones paso a paso. Esta informaciOn acerca de la puesta en marcha inicial tambi_n es v_.lida para cuando vaya a darle arranque al motor despu_s de haberlo dejado la m_.
8. Asegt]rese de que la control de la v_.lvulade admisi6n se encuentre en la posici6n "Rdpide" ("Fast") (A), que se distingue de un conejo. ADVERTEHCIA El retroceso(replieguerApido)del cabledel arrancador puede producir lesiones. El retroceso impedir_ que el _- usuario suelte el cable a tiempo y tirar_, de su mano y brazohaciael motor• Comoresultado,podrianproducirsefracturas, contusiones 0 esguinces. • I/UI/CA tire del cable del arrancador sin eliminar previamente la presi6n de la pistola rociadora.
NOTA: Siempre mantenga la control de v_lvula de regulaci6n en el "Rdpide" ("Fast") posicione cu_.ndooperar la limpiadora a presi6n. Usted tambi6n puedeajustar el patr6n de rociado girando la boquilla para que est6 concentrado en un patr6n de chorro o un patr6n expandido en abanico. C_mo Detener su Limpiadora a Preside 1. Suelte el gatillo de la pistola rociadora y deje funcionar el motor al ralenti durante dos minutos. 2. Mueva el acelerador a la posici6n "Slew" (Lente), posici6n "Step" (Parada) (A).
A _licaci_n del deteroente usando la boquilla a estable , PRECAUCIOH 6. Active el seguro del gatillo de la pistola rociadora y ponga en marcha el motor siguiendo las instrucciones de la secci6n CSmoponer en funcionamiento la Iimpiadora a presiSn. 7. Aplique el detergente sobre la superficie seca, comenzando en la parte inferior del Area y dirigi_ndose hacia arriba, utilizando movimientos largos, parejos y superpuestos. 8. Permita que el detergente "penetre" de 3 a 5 minutos antes de enjuagar.
Limpieza del tubo de inyecci_n de detergente 6. Si usted us6 el tubo, usted debe lavarlocon agua limpia antes de parar el motor. 1. Coloque el filtro y la inyecci6ndetergente en un balde Ilenode agua limpia. 2. Coloque el cerrojo de seguridad a la pistola de rociado. 3. Deslice boquilla ajustable hacia adelante al modo bajo de la presi6n. 4. Lave de 1 a2 minutos. 5. Pare el motor siguiendo las instrucciones de la secci6n C6mo detener la timpiadora a presidn y cierre la alimentaci6n de agua.
INFORMACi6NTECNICASOBREEL MOTOR ESPECIFICACIONES DELPRODUCTO El motor es de uno cilindros, de L-cabeza, refrigerado por aire y de baja emisi6n. Especificaciones de la M_quJna Limpiadora a Presi n En el Estado de California, los motores de la serie 90000 han obtenido la certificaci6n del California Air Resources Board (Consejo de recursos de aire de California) de cumplimiento de la normativa sobre emisiones durante 125 horas.
RESPONSABILIDADES DELPROPIETARJO Siga el programa de mantenimiento seg0n el n0mero de horas o seg0n el calendario, Io que suceda primero. Se requiere de servicio con mayor frecuencia cuando opere la unidad en las condiciones adversas descritas a continuaci6n.
Revise el Fiitro en Linea MAHTEHIMIENTODE LA MAQUIHA LIMPIADORAA PRESION Suministre servicio al filtro en linea si se tapa siguiendo estos pasos: Limpie los Residuos Limpie a diario, o antes de cada uso, los residuos acumulados en el limpiadoraa presiOn.Mantengalirnpiaslas conexiones, los muelles y los mandos. Limpie todo resto de combustible de la zona que rodea al silenciador y de detr_.sdel mismo. Inspeccionelas ranuras para aire de enfriamiento y la apertura del limpiadora a presiOn.
4. Retire la extension para boquillas de la pistola. 5. Quite el filtro en linea del otro extremo del prolongador de la boquilla siguiendo las instrucciones de la secciOn ComprobaciOn del filtro en Ifnea. MAHTENIMIENTODELMOTOR ADVERTENCIA Use un peque_o sujeta papeles para liberar cualquier material extra_o que est_ tapando la boquilla (A). _ Chispear involuntariopuedetener como resultado el '_¢ fuego o el golpe el_ctrico. CUANDO AJUSTE 0 HAGA REPABACJONESA SU M.
Comprobaci6ndeJ niveJde aceite 4. Incline su m_quina limpiadora a presi6n para drenar el aceite a trav_s del orificio de Ilenado en un recipiente adecuado asegurAndosede inclinar la unidad hacia el lado opuesto de la bujia. Cuando la caja del cigiJe_al est_ vacia, vuelva a colocar la mdquina limpiadora a presi6n en posici6n vertical. 5. Vierta lentamente unos 0,5 litros (18 onzas) de aceite por el orificio. Deposite el aceite recomendado hasta la marca "Full" de la varilla de medici6n. 6.
Remplace la Bujia Remplacela bujia anualmenteo cada100 horas de operaci6n. 1. Limpie el _rea alrededor de la bujia y retirela. 2. Retire y revise la bujia. 3. Cambie la bujia si los electrodos est_n picados o quemados o si la porcelana est_ agrietada. Utilice la bujia de repuesto recomendada. Consulte Especificaciones. 4. Si el motor ha estado funcionando, el silenciador estar_ bastante caliente. Dejeque el silenciador se enfrie para poder darle servicio al apagachispas.
DESPUESDE CADAUSO 3. No deber_,haber agua en la unidad por largos periodos de tiempo. Los sedimentos de minerales se pueden depositar en partes de la bomba y "congelar" su funcionamiento. Lleve a cabo estos procedimientos despu_s de cada uso: Desconectemanga del fusil del rocio y salida alta de presiOn en la bomba. DesagLieagua de la manga, del fusil, y de la extensi6n de boquilla. Use un harapo para quitar la manga. 4.
ALMACENAMIEHTO PARA JNViERNO Cambiode aceite Con el motor todavia caliente, drene el aceite de la caja del cigiJe_al. Vuelva a Ilenarlo con el grado de aceite recomendado. Yea Cambio de Aceite del Motor en la secci6n Mantenimiento de/Motor. AVISO Usted deber_,proteger su unidad de las temperaturas de _elamiento. si no Io hace,daiiar_perrnanenternente la bombayla unidadno podr_ funcionar.
Probiema Seluci6o Causa Est_ usando la boquilla de baja presi6n (negra). La bornbapresentalos siguientesproblernas: no producepresi6no produceuna presi6nerrada,traqueteo, p_rdidude presi6n,hajo volurnende agua. Cambie la boquilla a una de las tres boquilla de alta presi6n. 2. La entrada de agua estA bloqueada. 2. Limpie la entrada. 3. Suministro de agua inadecuado. 3. Proporcione flujo de agua adecuado. 4. La manguera de entrada estA doblada o presenta fugas. 4.
Sears, Roebuck andCo., U.S.A.(Sears),CaliforniaAir Resources Board(Consejode Recursossobreel Aire de California,CARB,por sus siglas en ingles)y United StatesEnvironmental ProtectionAgency(Agenciade Protecci6n Amhiental de EE.UU., EPA,porsos siglas en ingles). Declaraci6n degarantiadel sistema decontrol de emisiones (derechos y obligacionesdel propietario parala garantiacontradeiectos) California Air Resources Board (CARB), U.S.
Informaci_n sobre emisiones Algunos motores cuentan con la certificaci6n de cumplimiento de la fase 2 de las normas sobre emisiones de la United States Los motores con certificaci6n de cumplimiento de la normativa sobre emisiones de nivel 2 del California Air Resources Board (CARB) deben mostrar informaci6n sobre el periodo de durabilidad de las emisiones y el indice de aire. El fabricante del motor ofrece esta informaci6n al consumidor mediante etiquetas de emisiones.
iiiiiiiiiiiiiiiiiiiiiiiiii ii_iiiiiiiiiiiiiiiiiiiiiiii ii_iiiiii_iiiii_iiiii_iiiii_iii %iiiiiiiiiiiiii!_ iiiiiiiiiiiiiiiiiiiiiiiiii_ (1 888 784 6427) _!iiiiii!iiiiiiiii%_ !'!!!iiiiiii!!iiiiii!!!iiiiiiiiii: .... ......