Owner's Manual

8
Pull latches located on sides of lower frame (G) up and over
the hooks located on sides of power washer unit (F) as shown
(1). Push latches down to secure washer unit (F) to frame (G)
as shown (2).
Pull back on collar at one end of soft PVC hose (N). Push
firmly to connect hose to spray gun (K). Twist collar to secure.
Confirm hose is locked into spray gun by slightly pulling on
them. The hose is now securely attached to spray gun.
11
*I
K
1
2
2
2
9
1
K
N
N
8
1
2
F
G
Locking Spray Gun (before Lance installation)
To lock trigger of spray gun (K), point gun away from you and
turn dial to lock (either 3 or 9 o'clock position). Squeeze or
pull trigger to make sure it is locked. ALWAYS leave in locked
position when not in use. This ensures the gun is in "safe"
mode until it is ready for use. Turn dial to unlock (either 12 or
6 o'clock position) to release spray gun trigger.
NOTE: The trigger lock prevents trigger from being
accidentally engaged.
While spray gun (K) is in the locked position, insert lance (*I)
into the end of spray gun by inserting and turning clockwise
until fully in place. To remove turn counterclockwise.
10
1
K
Unlocked Locked
93988 Craftsman 2-n-1 Pressure Washer119.indb 8 17/11/13 下午4:05