Owner`s manual
FULL ONE YEAR WARRANTY ON CRAFTSMAN BELT SANDER
If this Craftsman Belt Sander falls to give complete satisfactiori within one year from the date of pur-
chase RETURN IT TO THE NEAREST SEARS STORE THROUGHOUT THE UNITED STATES and Sears
will repair it, free of charge,
If this belt sander is used for commercial or rental purposes this warranty applies for only 90 days from
the date of purchase.
Tills warranty gives you specific legal rights, and you may also have other rights whic_ vary from state
to state.
SEARS, ROEBUCK AND CO.
DEPT. 698/731A
SEARS TOWER
CHICAGO, IL 60684
INTRODUCTION
GENERAL
Your Craftsman 3-Inch Belt Sander is suitable for
coarse, medium and fine sanding of wood, metals,
plastics and other materials. It is ideal when used for
smoothing rough boards, chamfering, rounding
edges and many other general sanding applications.
Its balanced design makes it easy to use.
IMPORTANT -- Servicing of a tool with double in-
sulation requires extreme care and knowledge of the
system and should be performed only by a qualified
service technician. For service, return the tool to
your nearest Sears store for repair which will be
done with original factory replacement parts.
DOUBLE INSULATION
Double insulation is a concept in safety, in electric
power tools, which eliminates the need for the usual
three wire grounded power cord and grounded supp-
ly system. Wherever there is electric current in the
tool there are two complete sets of insulation to pro-
tect the user. All exposed metal parts are isolated
from the internal metal motor components with pro-
tecting insulation.
RULES FOR SAFE OPERATION
WARNING -- DO NOT ATTEMPT TO OPERATE THIS TOOL UNTIL YOU HAVE READ THOROUGHLY AND
UNDERSTAND COMPLETELY ALL INSTRUCTIONS, RULES, ETC. CONTAINED IN THIS MANUAL. FAILURE
TO COMPLY CAN RESULT IN ACCIDENTS INVOLVING FIRE, ELECTRIC SHOCK, OR SERIOUS PERSONAL
INJURY. SAVE OWNERS MANUAL AND REVIEW FREQUENTLY FOR CONTINUING SAFE OPERATION, AND
INSTRUCTING POSSIBLE THIRD.PARTY USERS.
READ ALL INSTRUCTIONS
1. KNOW YOUR POWER TOOL -- Read owner's manual carefully. Learn its ap-
plications and limitations as well as the specific potential hazards related to
this tool.
2. GUARD AGAINST ELECTRICAL SHOCK BY PREVENTING BODY CONTACT
WITH GROUNDED SURFACES. For example: Pipes, radiators, ranges, refrig-
erator enclosures.
3. KEEP GUARDS IN PLACE and in working order.
4. KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.
5. AVOID DANGEROUS ENVIRONMENT. Don't use power tool in damp or wet
locations or expose to rain. Keep work area well lit.
6. KEEP CHILDREN AWAY. All visitors should wear safety glasses and
be kept a safe distance from work area. Do not let visitors contact tool or
extension cord.
7. STORE IDLE TOOLS. When not in use, tools should be stored in a dry, high or
locked-up place -- out of the reach of children.
8. DON'T FORCE TOOL. It will do the job better and safer at the rate for which it
was designed.
9. USE RIGHT TOOL. Don't force small tool or attachment to do the job of a heavy
duty tool. Don't use tool for purpose not intended - for example - Don't use
a circular saw for cutting tree limbs or logs.
Page 2