Operator`s manual

TWO=SPEED GEAR TRAIN

See Figure 6.

The drill has a two-speed gear train designed for drilling or

driving at LO (1) or HI (2) speeds. A slide switch is located

on top of the drill to select either LO (1) or HI (2) speed.

When using drill in the LO (1) speed range, speed will

decrease and unit will have more power and torque. When

using drill in the Hi (2) speed range, speed will increase

and unit will have less power and torque. Use LO (1)

speed for high power and torque applications and Hi (2}

speed for fast drilling or driving applications.

TWOSPEED

GEARTRAIN(Hi-LO)

SPEED

Fig. 6

ADJUSTABLE TORQUE CLUTCH

This product is equipped with an adjustable torque

clutch for driving different types of screws into different

materials. The proper setting depends on the type of ma-

terial and the size of screw you are using.

ADJUSTING TORQUE

See Figure 7.

[] There are twenty-four torque indicator settings located

on the front of the drill.

[] Rotate the adjusting ring to the desired setting.

• 1-4

• 5-8

• 9-12

• 13-16

• 17 -23

For driving small screws

For driving screws into soft material

For driving screws into soft and hard

materials

For driving screws into hard wood

For driving large screws

For heavy drilling

TODECREASE ADJUSTING

TORQUE RiNG

TOINCREASE

TORQUE

Fig. 7