'S MANUAL 19.2 VOLT CORDLESS J_G SAW Variable Speed / Orbital Model No. 315.114280 Use jig saw only with recommended Craftsman battery pack and charger (both sold separately) WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: www.sears.
ONE YEAR FULL WARRANTY ON CRAFTSMAN TOOL (f th(s Craftsman too( fails to g(ve complete satisfaction w(thin one year from date of purchase, RETURN (T TO THE NEAREST SEARS STORE OR SEARS PARTS & REPAIR CENTER (N TNE UNITED STATES, and Sears wi(( replace it, free of charge. (f this Craftsman too( is used for commercia( or rental purposes, this warranty app(ies for only 90 days from the date of purchase.
_ WARNING!READANDUNDERSTAND ALL INSTRUCTIONS. Failureto followallinstructions listedbelow,mayresultinelectricshock,fireand/or seriouspersonalinjury. SAVE THESE mNSTRUOTmONS WORK AREA [] Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. [] Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignke the dust or fumes.
SERVmCE [] Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personne! may result in a risk of injury. [] Homdtoom by insumated gripping surfaces when performing an operation where the cutting toom may contact hidden wiring. Contact with a "live" wire will also make exposed metal parts of the tool "live" and shock the operator. [] Know your power tool. Read operator's manual carefully.
_ WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. [] Before using battery charger, read all instructions and cautionary markings in this manual, on battery charger, battery, and product using battery to prevent misuse of the products and possible injury or damage.
Someof the followingsymbolsmaybe usedon this too!. Pleasestudythemand learntheirmeaning.Proper interpretation of thesesymbolswillallowyouto operatethe too!betterandsafer.
Thefollowingsignalwordsandmeanings areintendedto explainthe levelsof riskassociatedwiththisproduct. SYMBOL SIGNAL MEANING DANGER: hdicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: hdicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTmON: hdicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
PRODUCT SPECmFmCATmONS Length of Stroke ............................................................................................................................................................... Strokes Per Minute .............................................................................................................................................. Switch .............................................................................................................................................
KNOWTHISTOOL See Figure 1. Before attempting to use this tool, familiarize yourself with all operating features and safety requirements. TOOL-LESS BLADE CLAMP Your saw has a blade clamp design that does not require the use of a tool (blade wrench) when installing or removing the blade. Simply lift blade clamp lock / release !ever, located on front of saw, insert blade between blade clamp and saw bar as far as possible, then release !ever to lock position.
_ LED FUNCTmONS OF CHARGER WARNING:Donotallowfamiliaritywithtoolsto makeyoucareless.Remember thata careless fractionofa secondissufficientto inflictserious injury. LED WILL CHARGER BE ON TO mNDmCATE STATUS AND BATTERY PACK: OF [] Red LED on = Fast charging mode. ,_ [] Green LED on = Fully charged and in trickle charge mode. WARNING: Always wear safety goggles or safety glasses with side sMelds when operating tools.
[] Pressdownonthebatterypackto besurecontactson the batterypackengageproperlywithcontactsinthe charger. [] Normally the redLEDonchargerwit!comeon.This indicatesthechargeris infastchargingmode. [] RedLEDshouldremainonfor approximately 1 hour thenthegreenLEDwillcomeon.GreenLEDon indicatesbatterypackis fullychargedandchargeris inmaintenance chargemode. NOTE:ThegreenLEDwillremainonuntilthe battery packis removedfromthechargeror chargeris disconnected fromthepowersupply.
_, WARNING:Batterytoolsarealwaysinoperating condition.Therefore, switchshouldalwaysbelocked whennot inuseor carryingatyourside. UFT BLADECLAMP TO iNSTALLBLADES See Figure 4. [] [] Remove battery pack, See Figure 3. Lift blade clamp lock / release }ever located on front of saw. [] Insert saw blade between blade clamp and saw bar, [] Release and !ock blade clamp }ever, [] Replace battery pack, HEX KEY STORAGE See Figure 5.
GENERALCUTTING See Figure 6. Rest the front of the saw base on the workpiece and align cutting edge of the blade with the line on your workpiece. Start your saw and move it forward on the work surface. Apply downward pressure to keep the saw steady and only enough forward pressure to keep the blade cutting. DO NOT FORCE YOUR SAW Forcing your saw may overheat the motor and break saw blades. Broken saw blades must be discarded.
ANGLE CUTTING See Figures 8 - 9. (BEVEL BASE P(VOTSCREWS OUTT(NG) Beve( cutting angles may be adjusted from 0 ° to 45 ° right or (eft, Ang(es for cuts from 0 ° to 45 ° in 15 ° increments are marked on a sca(e on both the (eft and right side of the base, Notches on the rear of the base provide positive stops at each of the above mentioned 15 ° increments, A protractor is recommended when accurate cuts are required. [] Using the 1/8 (n.
SPLmNTERoFREE CUTTING BASE PIVOTSCREWS See Figures 12 ° 13.
_ WARNING:Whenservicing,useonlyidentical Craftsman replacement parts.Useofanyotherpart maycreatea hazardor causeproductdamage. _ WARNING:Alwayswearsafetygogglesor safety glasseswithsideshieldswhenusingcompressed air to cleantools.Hftheoperationis dusty,alsoweara dustmask. _ _ WARMNG: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc. come in contact with plastic parts.
CRAFTSMAN I 19.2 VOLT CORDLESS JiG SAW - MODEL NO. 315.114280 number in all correspondence regarding your CORDLESS JiG SAW or when ordering he model number will be found on a plate attached to the motor housing, Always SEE BACK PAGE FOR PARTS ORDERING PARTS Key No. Part Number Description 1 690227036 Metal Cutting Blade ........................... 1 690227035 2 660302002 3 4 5 repair parts.
