Cordless Screwdriver Owner's Manual

SWITCH
See Figure 2.
Toturn your screwdriverON, depress switchtrigger in
the directionof the arrow in figure 2. To turn it OFF,
release the switchtrigger.
TRIGGER Fig, 2
TWO SPEED SWITCH
See Figure 3.
Your screwdriverhas been designed fortwo speed
driving.A slide switchis located ontop of your
screwdriver toselect either HI or LO speed. When
using screwdriverin the HI speed setting,speed will
increase and unitwill have lesspower and torque.
When using screwdriver inthe LO speed setting,
speed will decrease and unitwill have more power
and torque. Use HI speed forfast screwdriving
applicationsand LO speed for high power and torque
applications.
TWO SPEED (HI-LO SWITCH)
HIGH
LOW
Fig. 3
SWITCH LOCK
See Figure 4.
The switch triggercan be locked in the OFF position.
This feature can be used to prevent the possibilityof
accidental startingwhen not in use. Tolock switch
trigger, place the forward/reverse switch in center
position.
FORWARD (F)
REVERSE (R)
SWITCH
REVERSE (R)
FORWARD
WARNING: Battery toots are atways in
operating condition.Therefore, switchshould
always be lockedwhen not in use or carrying at
your side.
REVERSIBLE
See Figure 4.
Your screwdriveris equipped with a Forward/Reverse
Switch whichallowsyou to change the directionof
rotationof the bit. For drivingor forward rotation,slide
(F) position,To reverse the
bitdirection, slide the switchto the reverse (R)
position.
CAUTION: Toprevent gear damage, always
allow bitto come to a complete stop before
changing the directionof bit rotation.
Tostop your screwdriver, release switchtrigger and
arrowyour screwdriverto come to a complete stop.
_1= WARNING: Always wear safety gegg_esor
safety glasses with side shieldswhen operating
tools. Failure to doso could result in objects
being thrown intoyour eyes, resultingin possible
serious injury.
8