Cordless Screwdriver Owner's Manual
®
To preserve naturalresources,please
recycleor disposeof properly.
This productcontainsnickel-cadmium
batteries. Local, state orfederal laws
may prohibitdisposal of nickel-
cadmium batteries in ordinarytrash.
Consult your local waste authority for
information regarding available
recycling and/or disposal options.
BATTERY REMOVAL, PREPARATION FOR
RECYCLING
See Figum &
TO REMOVE:
• Lock switchtrigger by placingthe forward/reverse
switchin center position. See Figure 4.
• Remove cover securing batteries by depressing
and pushing cover in the direction of the arrow as
shown in figure 8.
• Slide batteries from motor housing enough to
expose leads and battery terminals. Disconnect
leads from battery terminals.
Note: Be careful not to break battery terminals
when disconnectingleads.
_. WARNING: Upon removal, cover the battery's
terminals with heavy dutyadhesive tape. Do not
attempt to destroy or disassemble batteryor
remove any of its components. Nickel-cadmium
batteries must be recycled or disposed of
properly.Also, never touch both terminals with
metal objects and/or body parts as short circuit
may result. Keep away from children. Failure to
comply with these warnings could result infire
and/or serious injury.
COVER
BATTERY
BATTERIES
MOTOR
HOUSING
BATTERY
TERMINALS
F_g.8
Key
No.
WHEN SERVICING, USE ONLY IDENTICAL CRAFTSMAN REPLACEMENT PARTS
Part
Number Description
Battery Charger
(Item No. _-11081)
974048-001 Battery Pack
972000-597 Owner's Manual
* Can Be Purchased Thru RSOS (Retail Special Order System)
11