3/8 in. 19.2 VOLT CORDLESS RIGHT ANGLE DRILL-DRIVER VARIABLE SPEED/REVERSmBLE Model No. 315.101540 _q / ¢ WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Customer HeUp Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Bevedy Rd., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: www.sears.
ONE YEAR FULL WARRANTY ON ORAFTSMAN TOOL Hfthis Craftsman tool fails to give complete satisfaction within one year from date of purchase, RETURN IT TO THE NEAREST SEARS STORE OR SEARS PARTS & REPAIR CENTER IN THE UNITED STATES, and Sears wil! repair it, free of charge. Hfthis Craftsman too! is used for commercial purchase.
_ WARNING!READANDUNDERSTAND ALL INSTRUCTIONS. Failureto followallinstructions listedbelow,mayresultinelectricshock,fireand/or seriouspersonalinjury. SAVE THESE mNSTRUCTmONS WORK AREA [] Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. [] Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
SERVmCE [] Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personne! may result in a risk of injury. [] Homdtoom by insumated gripping surfaces when performing an operation where the cutting toom may contact hidden wiring. Contact with a "live" wire will also make exposed metal parts of the tool "live" and shock the operator. [] Know your power tool. Read operator's manual carefully.
_ WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. [] Before using battery charger, read al! instructions and cautionary markings in this manual, on battery charger, battery, and product using battery to prevent misuse of the products and possible injury or damage.
Someof the followingsymbolsmaybe usedon this too!. Pleasestudythemand learntheirmeaning.Proper interpretation of thesesymbolswillallowyouto operatethe too!betterandsafer. SYMBOL NAME DESIGNATION/EXPLANATmON V Volts Voltage A Amperes Current Hz Hertz Frequency(cyclespersecond) W Watt Power min Minutes Time '%, Alternating H_ Direct Current Type or a characteristic no No Load Speed Rotational speed, at no load Class II Construction Doubleqnsulated Per Minute Revolutions, ...
Thefollowingsignalwordsandmeanings areintendedto explainthe levelsof riskassociatedwiththisproduct. SYMBOL SIGNAL MEANING DANGER: hdicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: hdicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTmON: hdicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
PRODUCT SPECiFiCATiONS Chuck .............................................................................................................................................................. 3/8 in. Keyless Motor ................................................................................................................................................................... 19.2 Volt DC Switch ................................................................................................................
KNOW YOUR R(GHT ANGLE DRILL-DRIVER FORWARD/REVERSE SELECTOR See Figure 1. (D(RECT(ON Before attempting to use this product, familiarize yourself w(th al( operating features and safety ru(es. Your dri)Fdriver has a forward/reverse above the switch trigger. KEYLESS WR(ST STRAP CHUCK OF ROTAT(ON SELECTOR} se(ector located Your dril(-ddver has a key)ess chuck that aUows you to hand tighten or release dr(l( bit in the chuck jaws.
UNPACKmNG WARNING: Hfany parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury. This product has been shipped completely assembled. [] Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.
_ _ WAF{NING:Donotallowfamiliaritywithtoolsto makeyoucareless.Remember thata careless fractionofa secondissufficientto inflictserious injury. CHARGING WARNING:Alwayswearsafetygogglesor safety glasseswithsideshbldswhenoperatingtools. Failureto doso couldresultinobjectsbeingthrown intoyoureyes,resultinginpossibleseriousinjury. NOTE: Batteries will not reach full charge the first time they are charged. AI!ow several cycles (operation fol!owed by recharging) for them to become fully charged.
[] RedLEDshou(dremainonfor approximately 1 hour thenthegreenLEDwillcomeon.GreenLEDon indicatesbatterypackis fullychargedandchargeris inma(ntenance chargemode. NOTE:ThegreenLEDwillremainonunti!the battery packis removedfromthechargeror chargeris disconnected fromthepowersupp(y. [] (fbothyellowandgreenLEDscomeon,this indicates a deeplydischargedordefectivebatterypack.AHow the batterypackto remaininthechargerfor15to 30 minutes.Whenthe batterypackreachesnormal vo(tagerange,the redLEDshou(dcomeon.
_ WARNING:Batterytoolsarealwaysinoperating condition.Therefore, switchshouldalwaysbelocked whennotinuseor carryingatyourside. SWmTCH See Figure 4. To turn the drill ON, depress the switch trigger. To turn it OFF, release the switch trigger. See Figure 4. The direction of rotation is reversible and is controlled by a selector located above the switch trigger.
INSTALLING B(TS See Figures 6 ° 7. [] Lock the switch tr(gger by p(acing the direction of rotation se(ector in center pos(t(on. [] Open or close the chuck opening is s(ightly (arger use. Also, raise the front bit from falling out of the jaws to a point where the than the bit size you intend to of the ddl( s)ight(y to keep the chuck jaws. [] Insert the dr((! b(t stra(ght into the chuck the fu(( (ength of the jaws. [] Tighten the chuck jaws on the drill b(t. UNLOCK (RELEABE) CHUCK COLLAR WRONG Fig.
WARNING:Alwayswearsafetygogglesor safety glasseswithsidesNeldswhenoperatingtools.Fai!ureto do socouldresultin objectsbeingthrowninto youreyes,resultingin possibleseriousinjury. WARMNG: Be prepared for binding at bit breakthrough. When these situations occur, drill has a tendency to grab and kick opposite to the direction of rotation and could cause loss of control when breaking through material. If not prepared, this loss of control can result in possible serious injury. DRmLUNG See Figure 9.
_ _ _ CHUCK WARNING:Whenservicing,useonlyidentical Craftsman replacement parts.Useofanyotherpart maycreatea hazardor causeproductdamage. To remove the chuck: [] Lock the switch trigger by placing the direction of rotation selector in center position. WARNING:Alwayswearsafetygogglesor safety glasseswithsideshieldswhenusingcompressed air to cleantools.Hftheoperationis dusty,alsoweara dustmask. [] Insert a 5/! 6 in. or larger hex key into the chuck of the drill and tighten the chuck jaws securely.
[] hsertthehexkeyin chuckandtightenthe chuck jawssecurely.Tapsharplywitha malletin a counterclockwisedirection.Thiswil!loosenthechuckonthe spindle.Hct annowbeunscrewed byhand. The battery pack for this tool is equipped with nickelcadmium rechargeable batteries. Length of service from each charging will depend on the type of work you are doing. The batteries in this too! have been designed to provide maximum trouble-free life. However, like all batteries, they wil! eventually wear out.
CRAFTSMAN RmGNT ANGLE DRmLL°DR_VER MODEL NUMBER 315.101540 _" 1 / ordering repair parts. SEE BACK ..... PAGE FOR PARTS ORDERING J _NSTRUCT_ONS 2 4 Key No. Pa_ Number Description Qty. 1 6612003 Chuck Screw .............................................................................................. 1 2 3 4 6903302 940237057 9420316 Chuck ......................................................................................................... Data Plate ..................................
