Operator’s Manual 10 Gallon Wet/Dry Vacuum Model No. 125.38907 CAUTION: Before using this product, read this manual and follow all its Safety Rules and Operating Instructions. Safety Assembly Operation Maintenance Parts Español - página 18 Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A www.craftsman.
Warranty CRAFTSMAN ONE YEAR FULL WARRANTY FOR ONE YEAR from the date of purchase, this product is warranted against defects in material or workmanship. A defective product will be replaced free of charge. For warranty coverage details to obtain free replacement, visit the web page: www. craftsman.com/warranty This warranty does not cover bags, filters, hose or attachments, which are expendable parts that can wear out from normal use within the warranty period.
starting, unplug power cord before changing or cleaning filter. • Do not leave Wet/Dry Vac unattended when plugged in. Unplug from outlet when not in use and before servicing. • Turn off Wet/Dry Vac before unplugging. • Do not put any object into ventilation openings. Do not vacuum with any ventilation openings blocked; keep free of dust, lint, hair or anything that may reduce air flow. • Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
Introduction This Wet/Dry Vac is intended for vacuuming wet and dry materials and may be used as a blower. Read this operator's manual to familiarize yourself with the product features and to understand the specific usage of your new Wet/Dry Vac. Table of Contents Section Page Section Page Warranty ................................................. 2 Maintenance ........................................11 Important Safety Instructions ........... 2 Emptying the Collection Tank ........
Assembly Remove entire contents of carton and check for parts inside the collection tank. Check each item against the Carton Contents List. If any parts are missing or damaged please call 1-800-469-4663 for replacement. A B C Carton Content List Key A B C D E F G H I J K L M Description ..............................Qty. Vac Assembly .............................. 1 Extension Wands ......................... 2 Hose ............................................. 1 Blower Concentrator Nozzle .......
Assembly (continued) A Phillps head screw driver is required. 1 2 3 4 5 6 7 8 9 10 11 ! WARNING: Do not plug in power 6. For dry vacuum cleaning, install the supplied reusable cloth filter. (fig. 6) See page 12 for filter installation. 7. For wet vacuum cleaning, install the supplied foam filter. (fig. 7) See page 13 for filter installation. 8. Place the power head back on the collection tank, aligning the top section with the latches, and snap into place. (Fig. 8 & Fig. 9) 9.
Operation Vacuuming Dry Materials ! WARNING: Be sure to read, understand and apply all the information in the Important Safety Instructions section at the beginning of this operator's manual. Do not vacuum in areas with flammable gases, vapors, or explosive dusts in the air. Flammable gases or vapors include but are not limited to: lighter fluid, solvent type cleaners, oil-base paints, gasoline, alcohol or aerosol sprays. Explosive dusts include but are not limited to: coal, magnesium, grain or gun powder.
Operation (continued) Vacuuming Liquids ! WARNING: Be sure to read, understand and apply all the information in the Important Safety Instructions section at the beginning of this operator's manual. Do not vacuum in areas with flammable gases, vapors, or explosive dusts in the air. Flammable gases or vapors include but are not limited to: lighter fluid, solvent type cleaners, oil-base paints, gasoline, alcohol or aerosol sprays.
Operation (continued) Blowing Feature ! WARNING: Always wear safety goggles complying with ANSI Z87.1 (or in Canada, CSA Z94.3) before using blower. ! WARNING: Keep bystanders clear from blowing debris. ! WARNING: Wear a dust mask if blowing creates dust that might be inhaled. 1 2 6 7 4 3 This Wet/Dry Vac has blowing capabilities. To use the blower feature follow the instructions listed. 1. Verify that the power cord is disconnected from the outlet. (Fig. 1) 2.
Operation (continued) Detachable Blowing Operation This Wet/Dry Vac converts to a detachable blower that can be used for leaf blowing in yards, decks and patios. To use the detachable blower feature follow the instructions listed. 3 2 5 4 6 7 ! CAUTION: To reduce the risk of hearing damage, wear ear protection when using the vac/blower for extended hours or when using it in noisy areas. 1. Verify that the power cord is disconnected from the outlet. (fig. 1) 2.
Maintenance Emptying the Collection Tank 1 2 4 3 7. Place power head on collection tank and secure latches. 1. Verify that the power cord is disconnected from the outlet. (Fig. 1) 2. Disconnect the hose from the vacuum. (Fig. 2) 3. Undo the latches and remove the power head from the collection tank. (Fig. 3) Place power head on a soft, clean surface upside down. 4. Clear all dirt or debris from the collection tank and hose into a proper waste container. (Fig. 4) 5. Clean or replace the filters. 6.
Maintenance (continued) Installing & Cleaning the Supplied Cartridge Filter 1 2 3 4 5 Removing and Cleaning Cartridge Filter 1. Position power head in the upside down position. If the retainer nut was used to secure the filter, remove retainer nut by turning counter clockwise. 2. Carefully lift filter up from filter cage. (Fig. 5) Installing Cartridge Filter 1. Verify that the power cord is disconnected from the outlet. (Fig. 1) 2. Undo the latches and remove the power head from the collection tank.
Maintenance (continued) Installing A Replacement Cartridge Filter Craftsman Filter with Rubber Top 1 2 Craftsman Filter with Plastic Top 3 1a 2a 3a THIS VACUUM CLEANER IS DESIGNED TO USE CRAFTSMAN CARTRIDGE FILTERS. 1. Carefully slide the Craftsman cartridge filter over the filter cage and press down on the outside edge of the filter until the rubber gasket on the bottom of the filter fits securely around the base of the filter cage and against the lid. (Fig. 1) 2.
Maintenance (continued) Installing & Cleaning Foam Sleeve Filter 1 2 3 4 Installing Foam Sleeve Filter 1. Verify that the power cord is disconnected from the outlet. (Fig. 1) 2. Remove power head from collection tank. If cartridge filter is installed, remove as shown on page 10 "Removing and Cleaning Cartridge Filter". 3. Carefully slide foam sleeve filter down over the filter cage making sure the whole cage is covered. (Fig. 2 & 3) 4. Place power head on collection tank and secure latches.
Troubleshooting WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK UNPLUG BEFORE TROUBLESHOOTING. Problem Possible Causes Corrective Action Vacuum will not operate . 1) No power supply. 1) Check power supply – cord, breakers, fuses. 2) Faulty power cord. 2) Unplug and check the power cord. If damaged, have it repaired by a professional. 3) Collection tank is full. 4) Switch in the wrong position. 3) Empty collection tank. 4) Press the ON ‘I’ button on the power head.
Repair Parts 125.38907 10 Gallon Wet/Dry Vac Always order by part number, not by key number. Always mention the model number when ordering parts. The model number is found on the serial plate located on the vacuum. To order parts, call 1-800-469-4663. WARNING: Servicing of double-insulated wet/dry vacuum. With double-insulated wet/dry vacuum, two systems of insulation are provided instead of grounding.
Repair Parts (Continued) 10 Gallon Wet/Dry Vac 17
Manual Del Operador Aspiradora Para Materiales Húmedos/ Secos De 10 Galones Núm. de modelo 125.38907 Seguridad Ensamble PRECAUCIÓN: Antes de usar este producto, lea este manual y siga todas las reglas de seguridad e instrucciones de operación. Operación Mantenimiento Piezas English- Page 1 Sears Brands Management Corporation, Hoffman Estates, IL 60179 EE.UU. www.craftsman.
Garantía GARANTÍA TOTAL DE UN AÑO DE CRAFTSMAN DURANTE UN AÑO a partir de la fecha de compra, este producto está garantizado contra defectos de material o mano de obra. Un producto defectuoso será reemplazado sin ningún costo. Para detalles sobre la cobertura de la garantía para obtener un reemplazo gratuito, visite la página web: www.craftsman.
un encendido accidental, desconecte el cable de corriente antes de cambiar o limpiar el filtro. • No deje la aspiradora de materiales húmedos/ secos desatendida cuando la enchufe. Desconéctela del tomacorriente cuando no esté en uso y antes de realizar el servicio. • Apague la aspiradora de material húmedo/seco antes de desconectarla. • No coloque ningún objeto en las aberturas de ventilación.
Introducción Esta aspiradora de material húmedo/seco está diseñada para aspirar materiales húmedos y secos, además puede usarse como un soplador. Lea este manual del operador para familiarizarse con las características del producto y para entender el uso específico de su nueva aspiradora de material húmedo/seco. Índice Sección Página Sección Página Garantía .........................................................19 Mantenimiento .............................................
Ensamble Retire todo el contenido de la caja y verifique si hay partes dentro del tanque de recolección. Verifique cada parte contra la lista de contenido de la caja. Si hay alguna parte faltante o dañada, llame al 1-800-469-4663 para recibir un reemplazo. A B C Lista Del Contenido De La Caja Clave A B C D E F G H I J K L M Descripción ........................... Cantidad Ensamble de la aspiradora ............... 1 Tubos extensores .............................. 2 Manguera .............................
Ensamble (continuación) Se requiere un destornillador de cabeza plana. 1 2 3 4 5 6 7 8 9 10 11 6. Para una limpieza con aspiradora de materiales secos, instale el filtro de tela reutilizable que se proporciona. (Fig. 6) Consulte la página 29 para obtener las instrucciones sobre la instalación del filtro. 7. Para limpiar materiales húmedos con la aspiradora, instale el filtro de espuma que se proporciona. (Fig.
Operación Aspiración de Materiales Secos ! ADVERTENCIA: Asegúrese de leer, entender y aplicar toda la información de la sección de instrucciones de seguridad importantes que está al inicio de este manual de operaciones. No aspire en áreas con gases inflamables, vapores o polvos explosivos en el aire. Los gases o vapores inflamables incluyen, entre otros: líquidos encendedores, limpiadores de tipo solvente, pinturas con base de aceite, gasolina, alcohol o aerosoles.
Operación (continuación) Aspiración de Líquidos ! ADVERTENCIA: Asegúrese de leer, entender y aplicar toda la información de la sección de instrucciones de seguridad importantes que está al inicio de este manual de operaciones. No aspire en áreas con gases inflamables, vapores o polvos explosivos en el aire. Los gases o vapores inflamables incluyen, entre otros: líquidos encendedores, limpiadores de tipo solvente, pinturas con base de aceite, gasolina, alcohol o aerosoles.
Operación (continuación) Función de Soplado ! ADVERTENCIA: Siempre use lentes de seguridad que cumplan con la norma ANSI Z87.1 (o en Canadá, CSA Z94.3) antes de usar el soplador. ! ADVERTENCIA: Mantenga a los transeúntes lejos de los desechos voladores. ! ADVERTENCIA: Use una mascarilla anti polvo si el soplado crea polvo que pudiera inhalarse. 1 2 6 7 4 3 Esta aspiradora de material húmedo/seco tiene capacidades de soplado.
Operación (continuación) Operación del Soplador Desmontable Esta aspiradora de material húmedo/seco se convierte en un soplador desmontable que puede usarse para soplar hojas secas en jardines, pórticos y patios. Para usar la función de soplador desmontable, siga las instrucciones que se enumeran a continuación. 3 2 5 4 6 7 ! PRECAUCIÓN: Para reducir el riesgo de daño auditivo, use protección de oídos cuando utilice la aspiradora/soplador por tiempo prolongado o cuando la utilice en áreas ruidosas.
Mantenimiento Cómo Vaciar el Tanque de Recolección 1 2 4 3 1. Verifique que el cable de corriente esté desconectado del tomacorriente. (Fig. 1) 2. Desconecte la manguera de la aspiradora. (Fig. 2) 3. Abra los pasadores y retire la cabeza motriz del tanque de recolección. (Fig. 3) Coloque la cabeza motriz en una superficie suave y limpia en posición invertida. 4. Limpie toda la suciedad o desechos del tanque de recolección y la manguera en un recipiente de desperdicio adecuado. (Fig. 4) 5.
Mantenimiento (continuación) Instalación y Limpieza del Filtro de Cartucho Proporcionado 1 2 3 4 Instalación del filtro de cartucho 1. Verifique que el cable de corriente esté desconectado del tomacorriente. (Fig. 1) 2. Abra los pasadores y retire la cabeza motriz del tanque de recolección. 3. Coloque la cabeza motriz sobre una superficie limpia en posición invertida. 4. Deslice el filtro de cartucho sobre la caja del filtro. (Fig.
Mantenimiento (continuación) Instalación de un Filtro de Cartucho de Reemplazo Filtro Craftsman Con Tapa De Caucho 1 2 Filtro Craftsman Con Tapa De Plástico 3 1a 2a 3a ESTA ASPIRADORA ESTÁ DISEÑADA PARA USARSE CON FILTROS DE CARTUCHO CRAFTSMAN. 1.
Mantenimiento (continuación) Instalación y Limpieza del Filtro de Manga de Espuma 1 2 3 4 Instalación del filtro de manga de espuma 1. Verifique que el cable de corriente esté desconectado del tomacorriente. (Fig. 1) 2. Retire la cabeza motriz del tanque de recolección. Si hay un filtro de cartucho instalado, retírelo como se muestra en la página 27 "Retirar y limpiar el filtro de cartucho". 3.
Resolución de Problemas ADVERTENCIA: PARA REDUCIR EL RIESGO DE DESCARGAS ELÉCTRICAS, DESCONECTE LA ASPIRADORA ANTES DE RESOLVER UN PROBLEMA. Problema Causas posibles Acción correctiva La aspiradora no funciona. 1) No hay suministro de energía. 1) Revise el suministro de energía cable, disyuntores, fusibles. 2) Cable de corriente defectuoso. 2) Desconecte y revise el cable de corriente. Si está dañado, envíelo a reparar con un profesional. 3) El tanque de recolección está lleno.
Partes de Repuesto Aspiradora De Materiales Húmedos/Secos De 10 Galones 125.38907 Siempre ordene por número de parte y no por número de clave. Siempre mencione el número del modelo cuando ordene partes. El número de modelo se encuentra en la placa de serie que se encuentra en la aspiradora. Para ordenar partes, llame al 1-800-469-4663. ADVERTENCIA: Cómo dar servicio a una aspiradora de material húmedo/seco de doble aislamiento.
Partes de Repuesto (Continuación) Aspiradora De Materiales Húmedos/Secos De 10 Galones 34