Operator`s manual

Assembly (continued)
For your convenience this vacuum
comes with a wall mounting support
for storage.
IMPORTANT?
* Do not mount the rack over 5 feet
from the floor.
e Do not screw the rack to drywall only.
Secure the screws to a stud.
* Do not hang from or sit on the vacuum
when on mounting rack.
o Do not use the vacuum while it is
mounted on the wall mounting support.
o Empty the collection tank before
mounting the vacuum on the wall.
11. Make sure the rack is level and mark
the hole locations. Make 1/8-inch
diameter pilot ho_e in each marked
location. Align the two screw holes
so that they are over a stud and
secure the mounting support to the
wall stud with the two screws
provided. (Fig. 12)
12. Place the wet and dry vacuum
cleaner into the support. (Fig. 13)