Owner`s manual

Controls
Pawls/Riving
Knife Knob
Tab
Pawls
\
Guard Tab
Pawls/Riving
Knife Knob
Pawls
Riving Knife
Riving Knife
Fu_on
Provides manual way to raise
clear plastic guard during tip-
ping when workpiece fails to
raise it
Frees pawls and riving knife to
independently move up and
down
During ripping, slow or stop
kickback by digging into work-
piece; when lowered during
crosscutting, provide partial bar-
rier to leading edge of blade
Reduces kickback by keeping
kerr open; when lowered during
crosscutting, provides partial
barrier to leading edge of blade
Operation/Comments
Push and hold until workpiece
clears guard, then release
Turn counterclockwise to
loosen, clockwise to tighten
For ripping, set pawl level on
workpiece surface. For safety
reasons set pawls before rip-
ping; See Ripping Set-Up for
details and illustrations
For ripping, lower to table
For safety reasons riving knife
must be in line with blade. See
Alignment: Riving Knife to
Blade
41