Owner`s manual

Controls
Hold Down
Knob
Guard
Guard Clamp
Screw
Pawls/Riving
Knife Knob
Riving Knife
Bracket
Hold Down
Riving Knife
Pawls
Con_ol
Guard Clamp
Screw
Guard
Hold Down
Knob
Hold Down
Riving Knife
Bracket
Function
Secures guard to motor, frees
guard for removal
Protects against contact with
upper blade; partially protects
against contact with lower
blade; acts as sawdust deflector
Frees hold down to move up
and down; locks hold down in
place
During ripping, acts as partial
barrier to infeed side of blade;
keeps infeed side of workpiece
from fluttering; acts as sawdust
deflector
Prevents side to side movement
of riving knife and provides
means for adjusting alignment
Operation/Comments
Tum counterclockwise to
loosen, clockwise to tighten
Upper part remains fixed in
level position. Notch in guard
fits securely into matching tab
on motor
Clear guard is moveable: raise
over fence at start of crosscut;
See Saw Handle; most work-
pieces will automatically raise
clear guard during ripping; See
Guard Tab
Turn counterclockwise to
loosen, clockwise to tighten
For ripping, lower hold down to
top of workpiece surface, then
raise slightly and lock in place.
For crosscutting lock in fully
raised position
Loosen to align riving knife,
then tighten
4O