..... _ .... ,,,, ,i X Save This::iVlanual For Future Reference MODEL NO. 113.179490 16 GALLON WET/DRY ELECTRONIC VAC Serial number Model and serial number may be found on the motor cover. You should record both model and serial number in a safe place for future use. F 16 GALLON DOUBLE INSULA TED CAUTION: Read aB! instruciiens WET/DRY ELECTRONIC VAC safety carefully • assembly, @ operating @ repair parts J Sogd by SEARS, ROEBUCK AND CO. Chicago, Part No. SP 5321 IL 60684 U.
FULL ONE YEAR WARRANTY ON CRAFTSMAN WET/DRY VACS if within one year from the date of purchase, this Craftsman WeVDry Vac fails due to a defect in ms° tertsl or workmanship, Sears wUl repair it, free of charge. WARRANTY' SERVICE IS AVAILABLE BY SIMPLY CONTACTING THE NEAREST SEARS SERVHCE CENTER/DEPARTMENT THROUGHOUT THE UNITED STATES. This warranty applles only while this pr_uct is used in the United S, ates.
The operation of any utility vac can result in foreign objects being blown into the eyes, which can result in severe eye damage. Always wear safety goggles complying with ANSI Z87.1 (shown on Package) before commencing operation. Safety Goggles are available at Sears retail or catalog stores. INTRODVCTItON OWNERS This Wet/Dry Vac is intended for either commercial or household use. MANUAL CONTENTS Item Page Warranty Information .................................................. 2 Safety instructions....
ASSEMBLY fioaVcage assembly WARNING: For your own safety, never connect plu_ 1o power source ouUet unfit all assemb|y steps are comptete and you have read and understood the safety and operation instructions. Do not operate vac with any paris damaged or missing. Remove the topsection of the vac from lhe drum and the drum itself out of the carto_. Place the _op section of vsc _.
NOTE: if the cage needs to be removed, because the float is placed in the wrong way, use a slotted screwdriver and apply the slotted end to one of the cage tabs. Push in on the tab and mift the cage up. Tilt the cage slightgy away from the open slot to release the other two tabs. Pull the cage away from the lid. To replace foNow float cage assembly instructions. I rifler assembly :/o/_ _ ................. FILTERNUt 1.
1. Turn the dust drum upside down on the floor. 2. Insert the caster feet into the bottom ofdrum, shown (4 places). as 3. Push on the caster foot until the footis flushwith bottom of the dust drum. 4. Insert the caster stem into the socket of the caster foot, as shown (4 places). CASTER BALl 5. Push on the caster until the ball on the caster stern is inserted all the way into the socket. You will be able to feel the ball snap into the socket and the caster will swivel easily when positioning is correct.
OPERATIONS WARNING To avoid fire or explosion caused by the igniting of vapors or dust due to the arcing of the motor brushes do not operate this vac in areas with flammable vapors such as lighter fluid, cleaners, oiFbase paints, gasoline, alcohol or explosive dust such as coal magnesium, grain or gun powder in the air. Do not vacuum explosive dust, flammable or combustible liquids or hot ashes. Do not use this vac as a sprayer for any flammable or combustible liquid.
MAINTENANCE FILTER MAINTENANCE WARNING -- Unplug power cord before changing or cleaning filter. NOTICE: This filter is made of high quality paper designed to stop very small particles of dust. The filter Can be used for wet or dry pick up. Handle the filter carefully when removing to clean or installing it. Creases in the filter pleats may occur from installatioF but creases will not affect the performance of the filter.
S EARS WET DRY VAC RECOMMENDED m 2-1/2" DIAMETER PLASTIC (Pictured 1. 2. 3. 4. 9-16901 9-16964 9-16902 9-16978 Round Dusting Brush Two Piece Extension Handle Crevice Tool Car Nozzle 1-1/2" DIAMETER HEAVY ACCESSORmES below) 5. 6, 7. DUTY ACCESSORIES 9-16925 9-17817 9-17820 9-17829 METAL Dry Floor Nozzle Squeegee Nozzle Extension Hose 7 Ft. Extension Hose t3t/2 Ft.
PARTS LiST FOR 16 GALLON ELECTRONIC WET-DRY VAC 1!3.179490 3 4 \ L 23 +_ 28 I t 32 / 33 10
PARTS LnST FOR 16 GALLON ELECTRONIC WET-DRY VAC 113.179490 A_ways order by Part Number - Not by Key Number Key No. Part No, 1 2 3 73321 73313 814957 4 9426108 5 6 7 8 9 10 11 12 13 73319 73320 73304 73305 14 15 73301 816652-1 !7 STD611007 73310 73311 73322 73312 73303 Description NO, Part No, Cover, Motor Knob, Variable Speed Screw, Flat Hd. Cross Type BT, No. 4 x 1/2 Screw, Pan Cross Type AB No.
F 16 GALLON DOUBLE iNSULATED WET/DRY ELECTRONIC Service is available by returning Sears Service Center/Department States. SERVICE MODEL NO. 113.179490 Model and serial of your Wet-Dry number Vac. VAC this Vac to the nearest throughout the United may be found on the Motor Cover 16 GALLON WET/DRY ELECTRONIC VAC HOW TO ORDER REPAIR PARTS WHEN ORDERING REPAIR FOLLOWING INFORMATION: PARTS, ALWAYS PART NUMBER PART MODEL NUMBER 113.