E3000‐C18B Branch Router Quick Start Guide ‐ DRAFT
Introduction This document provides a brief overview of the E3000‐C18B Branch Router, discusses what's inside the box, and provides basic setup and install instructions.
Hardware Hardware specifications vary by model type. Accessories To enable cellular connectivity, you will also need at least one activated 2FF‐sized SIM card with an active cellular data plan.
Before You Begin Read the following before setting up the E3000‐C18B Branch Router. Location Considerations To ensure the E3000‐C18B operates efficiently, do the following: Ensure the device is positioned to receive optimal signal. Avoid positioning near concrete walls, metal or reflective surfaces, or any other objects that may interfere with RF reception. Ensure plenty of ventilation. Avoid installing the device in enclosed spaces. Do not install the device in direct exposure to the elements.
c. Insert an activated 2FF‐sized SIM card with metal contacts face up and notch in, into the SIM 1 slot. It will click into place. Depress again to remove, if necessary. d. Insert a secondary/backup, activated SIM card into the SIM 2 slot, if desired. e. Replace the modem door and secure with the modem door screw. NOTE: The modem door cover must be on the device or the embedded modem will not power on. 2. Insert Optional External MC400 Modem. The E3000‐C18B has a slot for second, removable modem (MC400).
Understanding LEDs INDICATOR BEHAVIOR POWER: The Cradlepoint E3000‐C18B must be powered using an approved 54 VDC power source. Green = Powered On. No Light = Not receiving power. Check the power switch and the power source connection. Amber = Attention. Open the administration pages and check the router status. VPN VPN: Indicates status of VPN connection. Blue = Connected to an active VPN.
INDICATOR BEHAVIOR 4 Blinking Bars = SIM door is not installed, modem is off. EMBEDDED MODEM: Indicates information about the embedded modem. Green = Modem has established an active connection. Blinking Green = Modem is connecting. Amber = Modem is not active. Blinking Amber = Data connection error. No modem connection possible. Blinking Red = Modem is in the process of resetting. Blinking Red with Signal Strength LEDs = SIM door is not installed, modem is off.
Help and Support Cradlepoint Customer Connect Community Cradlepoint Support Services E3000-C18B Branch Router Models This document applies to all of the following E3000‐C18B models: CRADLEPOINT E3000‐C18B MODELS E3000‐C18B Model: S5A950A WITH OPTIONAL PLUG‐IN LTE MODULES MC400LP4 MC400LP4 MC400LP5 MC400LP5 MC400LP6 MC400LP6 MC400‐600M‐C MC400‐600M‐C MC400‐1200M MC400‐1200M
170814-000-e3000-print-11012019.
SAFETY, REGULATORY, AND WARRANTY GUIDE CRADLEPOINT E3000-C18B WITH OPTIONAL PLUG-IN MODULES: CRADLEPOINT MC400LP4 CRADLEPOINT MC400LP5 CRADLEPOINT MC400LP6 CRADLEPOINT MC400-600M-C CRADLEPOINT MC400-1200M-B The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate.
To find information on Cradlepoint’s commitment to our environment and how to responsibly recycle or recover Cradlepoint products at the end of their useful life, please visit Cradlepoint.com/international. FREQUENCIES USED AND MAXIMUM POWER OUTPUT E3000-C18A 2400-2483.