C P Van Caravan CP2 PIR Motion Sensor Alarm Compatible with Caravan Home Alarm Sensors DISPUTANT: Please also refer to wirmapyens.cum for Further information nd technical assistance. We are Improving our site continuously to make sure you have sis bast possible experiences with cur products. We normally respond within hours 10 any guesstimate, Congratulations with your Caravan PIR CP2 Motion Sensor Alarm. The PIR motion sensor alarm Is Intended to detect when people enter your shop or your home.
1xCP2 PIR motion sensor alarm remote control 3x batteries 1.5V AAA, alkaline Flexible mount Pair of screws Instructions for use Siren B.Detection window C.Mode button [31 [8B] » E Pairing button Lif] Ball button :trigger a loud malignancy alarm Amn button:activate the Alarm unit Disarm:dsactivate the Alarm unit Switch vocal sandwich trim Chime to siren and vice vars . @r Bo First preparation of the CP2 PIR Motion Sensor Alarm Slide off the back lid, and insert 3 AAA batteries. Case the ld.
Pressing the buttons IMPORTANT: There are 2 ways to press the buttons on your Alarm unit: Short press: pass tee button for 1 second or less. Long press: keep the button pressed for 5 seconds. Usually, th long Brass of § seconds Is sad to enter a programming or pairing mode, This procedure prevents that important suiting ace changed accidentally, Using the CP2 PIR motion Sensor Alarm The CP2 PIR Motion Sensor Alarm can be operated both through the remote control as well as by pressing the buttons on the top.
Changing the sound: Short press the Mode button [7:1 to.change between sounds. Each time the button Is pressed, a short sample of the chosen sound Is heard (Siren or Chime). Stopping the Siren alarm sound: There are three ways to stop the siren alarm nous 1, Short press the Mode button [21 ar the Pairing bunion Lun] . The sound will stop and the unit will stay armed. 2. Short press the Oneself button [£1 on the Alarm Unit, There will be two hart beeps and the alarm sound will stop.
Make sure the PIR mason sensor alarm is ON On the PIR motion sensor alarm, long press the Pairing button Lan] to enter pairing mode. The detector ght will light up continuously. « Press any button on your remote control. You will hear two beeps to Indicate correct paling « Shortness Pairing bunion Lull to exit the paling mode. Your remote has now been paired. Multiple remotes can be connected to any PIR motion sensor.
Multiple sensors can ba CAD Bos AOE on sensor Using the remote control The supplied marmots control will work with multiple PIR motion sensor alarms If required. Each new PIR motion sensor alarm Is supplied with a remote per-palred with your PIR motion sensor.
IMPORTANT: If you have added emergency sensors, then these can only be deleted from the device by dong a factory reset. Please refer to the corresponding Instructions In ths many Changing the batteries AGRARIAN: When the battles are running empty the detector light will dash poe ovary 40 seconds and o beeping sound wilt be heard. Please change the ‘Bantering at your starlit conveyance. Remote control The battery can be changed by removing the screw an the back of the remote contra.
Technical specifications Po war: DC / PCs * AAA Battery Current: <300uA Work Switch off Detection Alarm sound: 125dB Detection Angina Working Hur 10 degree 0% Detection range profile: IMPORTANT: The infrared detector is sensitive to 8 human's vertices! movement, and less sensitive to horizontals! movements, so [t's best to alm the device ata 90 degrees’ angle to 2 person's walking direction.
Q: The device signals motion when there Is no motion (false alarms”) AL: The PIR motion sensor alarm inactivated by infrared light and ean also be triggered hy direct sunlight. It is advised to keep the device out of direct sunlight. AZ: Animals ike dogs, birds and cats are known to trigger PIR motion sensors as wel Q: The remote-control Indicator light Is on when | press abut tan but the PIR motion detector does not react to lt.