User's Manual

Operating Range Max 20m(Open) Battery 3.7V 880mAh(Li-polymer)

RF Protocol Bluetooth 5.0 LE Current 100~200mA

Frequency Range 2,402~2,480MHz Weight 50g

Frequency Channel 40CH Size 65 x 85 x 28mm

RF Power Max 3mW Operation

Temp. -10 ~ 50℃

Humi. 10 ~ 95%

Modulation GFSK Storage

Temp. -10 ~ 60℃

Humi. 95% Less

CAMG-A1000 User Manual

[ Specification ]

[ Usage ]

A device that collects and displays various environmental information measured indoors or

outdoors.

The information can be displayed by smartphone app.

[ How to use ]

1. Before to use

① Fully charge the device.

② Check the contamination of the product and keep it clean.

2. How to use and operating procedure

PAGE 1
CAMG-A1000 User Manual [ Specification ] Operating Range Max 20m(Open) Battery 3.7V 880mAh(Li-polymer) RF Protocol Bluetooth 5.0 LE Current 100~200mA Frequency Range 2,402~2,480MHz Weight 50g Frequency Channel 40CH Size 65 x 85 x 28mm RF Power Max 3mW Operation Modulation GFSK Storage Temp. -10 ~ 50℃ Humi. 10 ~ 95% Temp. -10 ~ 60℃ Humi. 95% Less [ Usage ] A device that collects and displays various environmental information measured indoors or outdoors.
PAGE 2
① Press the power button for 3 seconds to turn on. ② Fix the device to the place where you want to mount. ③ Open the smartphone app and link the device. For more information, see how to use the app. 3. Storage and management after use ① Be careful not to get water in, and do not store it near water. ② Do not use in places that are adversely affected by air pressure, temperature, humidity, wind, etc. ③ Be careful from vibration and shock. ④ Do not store in chemical storage areas or gas generating areas.
PAGE 3
1) FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2) Any changes or modifications (including the antenna) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.