Contents: @ Safety Instructions /01 & Whats In The Box Glance 103 @ micros D Card /04 & Installation 106 @ Use /08 1. Daily Use 2. Shortcut Keys 3. LED Indicators 4. Screen Overview 5. Main Menu 6. Parking Monitor 7. Watch recordings via Reset 9.
1 Safety Instructions Please read and understand all instructions hereunder before using this product. if damage is caused by failure to follow the instructions, the warranty does not apply. @ Keep this user manual. @ DO NOT operate this product while driving. ® DO NOT drop, puncture, or disassemble this product. ® DO NOT expose this product to liquid, or open flames. @ DO NOT use any corrosive cleaners/oils to clean this product.
2 Whats In The Box Een User Manual AL * Cox pal ASD Dual Dash Camera E.1* GPS Mount, With Adhesive Tape B.1* USB to USB Type-C Cable 35M11FT) C.1* Dual USB Car Charger SVdc/24A F. 1 * Spare Adhesive Tape D.
a A Glance Qu Description 1 | GPS Mount Rota table, detachable, adhesive 2 USB Type-C port 1 Evade power input 3 micros D Card Slot For an external micros D card 4 Parking Indicator Indicates parking mode 5 Front Camera Lens Rota table by GPS mount 6 Speaker Plays audio 7 Inside Camera Lens 5° all-direction rota table 8 RILED lights apes IR LED lights for infrared night vision 9 LCD Screen 1.
4 acrostic Card 1. This camera supports genuine micros D memory card up to 256GB with a speed rating of class or above. 2. For 64GB or 128GB or 256GB card, please beforehand format it to FAT, the card can be formatted by either this camera or computer Windows & Mac). 3. DO NOT remove, or insert the card when this camera Is powered on which may cause card corruption and data loss, 4.
7. The recordings will be saved into following 4 folders respectively: Lo eel Normal; Front Normal | Parking. « Manually locked; G-sensor locked; « Moved from “Normal”. Front Event = Normal; Inside Normal | Parking. = Manually locked; « Sensor locked; « Moved from “Normal”. Inside Event Note: Yas » Based on “First in first out” when storage is full; + If set loop recording off, pop-up box appears when storage is full. Mo « Pop-up box appears when storage is full.
Installation 4 1. Install this product near the rear view mirror to obtain the best open field view. 2. DO NOT install it in a location where may obstruct driver's view. 3. Ensure the lens is within the wiping range of the windscreen wiper to ensure a clear view in all weather conditions. 4. Keep the lens stays clean to ensure clear videos — be especially careful not to leave fingerprints. 5. Ensure the surface of the windscreen is clean and dry and attach the adhesive mount onto the windscreen securely. 4.
2. Select an ideal location the windshield near the rear view mirror, clean with clear water and wait until fully dry. 3. Remove the protective film of the adhesive tape and firmly affix the mount onto the windshield, 4. Use the crowbar fo tuck and hide the power cable into the seams and weatherstrips around the edge of the dashboard. 5. Adjust the viewing angle of front lens and rear lens respectively to ensure that they are aligned with the road ahead and the cabin inside.
Use 1. Dally Use Once installed properly, the camera will function without the need for maintenance, The following are 3 key status indicators: » Micro SD card: if the SD card is functioning abnormally, the camera will beep. = Camera Power State: The cameras LED indicates that it is operating normally. = Camera Recording Mode: The red dot will flash on the screen, which indicates that it is recording. 2.
2. LED Indicators Green Flash Normal recording Working Indicator Green Quick Flash Firmware upgrading Green Constant On Camera power on Parking Indicator ~~ Red Flashily optional) Parring mode 4.
5. Main Menu 1. Enter info Main Menu: Short press UP fo pause Recording Mode {Red dot disappears on screen}— Short press LEFT. 2. Set parameters in Main Menu: UP/DOWN fo navigate; OK to confirm, 3. Exit from Main Menu: Short press LEFT — Back to Recording Mode. 4.
Mote: Time Zone: Set Time Zone correct in “Main Menu— Camera Settings — GPS" is required for the first use. Frequency: Generally speaking, 220Vac=50Hz; 110Vac=60Hz. infrared LED: AUTO: The camera automatically tums on/off infrared LED based on ® sensing the changes of luminescence through the front lens. The brightness of PCS LED lights is 2-level adjustable automatically according to the ambient brightness. Loop Recordings Loop Recording "Of poses risk of no recordings after the card storage is full.
6. Parking monitor 1. To realize parking monitor, uninterrupted power is required: YT 1. Neat A little extra installation at and doesn't occupy cigar 2. It can't 100% : lighter; protect car Official Cox pal battery from Regular use installed. 2. "Low voltage draining protection” especially for to avoid car old car battery from batteries. draining. 1. No “low voltage Active cigar protection”, lighter 1. Quick and potentially (When car direct. drain car engine is off, battery. Short time use the cigar 2.
2. How does parking monitor work? Parking Monitor "OFF": e If hardwired is installed: Camera is still recording. «If hardwired is not installed: Camera powers off when vehicle engine Is off (For a few vehicles which Is equipped with active cigarette lighter, please set either "Time lapse FPS" or "Low Resolution 720P" and Guard Time 15 minutes, the camera can be off after 30 minutes when the vehicle is parked).
7. Watch recordings via Two options to watch the recordings: * By directly connecting the camera with an USB data cable. Mote: Inferior data cable affects transfer speed. e By directly reading the micros D card with a card reader. 2. If watch via Mac or Windows computer, proprietary COX PAL media player is available: » It supports play 2-channels simultaneously; s It supports play GPS speed & trajectory; » The player can be downloaded from wwaw.coogpal.com, 8.
7] APP £ 1. Compatible with: Smart phone running android 4.0 or higher & 1087.0 or higher. 2. User Privacy: We take user privacy very seriously and our APP DOES NOT collect any kind of personal data but only basic permissions required, please rest assured fo use It 3. The camera keeps working without connecting the APP, no bother to get APP connected for most of the time but just let the camera work alone. 4.
Mote: 1. To stream preview video smoothly, the image in Preview Mode is not based on the original resolution but compressed. 2. To play video files in APPS Album with GPS information, disconnect with the camera and connect with interment is required. 4. Troubleshoot connection problems: 1.
~ Specifications The specifications of this product hereunder may change without prior notice due to product improvements. Model No COX PAL ASD Main Processor Innovate Front Image Sensor Sony IMX335 5-mega pixel COS Inside Image Sensor Sony IMX307 2-mega pixel COS Front Lens F1.6; 140° FOV; 7-glasses; 1 infrared filter Inside Lens FLE 140° FOV; &-glasses, sped infrared LED Display Screen 1.
Q aos 1. Q: Why “SD card error? A: Most probably the card is defective, or fake, you could search and install a tool named “HOTTEST" to test it. 2. O: Why my SD card doesn't work with this camera but it works with other cameras? A: Different cameras or different applications requires different writing speed, the better image quality recorded, the faster writing speed recurred. 3.
6. 0: Why the camera falls off from the windscreen? A: Clean the surface of the windscreen and initially tight fixation is very important, then the camera never fall off, In addition, the viscous force of the adhesive tape is significantly down for the second use, hence, replace the adhesive tape if the camera falls off from the windscreen, 7.
1 0 Warranty & Support Warranty: Full 12-month since the date of purchase. Support: Rerecorded Mail Subject Format for quickly handling your case: Model No + Purchase Channel + Order ID For example: Subject ASD + Amazon US + Order ID 123-456789-0123456 Your pinion matters! Cox pal is firmly committed to continually improving our products, services, and user experience. if you have any thoughts on how we can do even better, we always welcome your constructive feedback and suggestions.
This product complies with the radio interference requirements of C € the European Community. Operating Frequency Range: 2400 24835 MHz, Max Quip Power: 15 dBm This product is designed and manufactured with high quality materials and components, which can be recycled and reused. household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with Norma household waste.
{3 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help. This device is acting as slave and operating in the 24 GHz (2412-2462 MHz). FCC Radio Frequency Exposure Statement The equipment complies with FCC Radiation exposure limits set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.