Scouting Camera Instruction Manual Watch the set up video on our websiteat:www.coverts coutingcameras.
What you will need to set thiscamera up: ‐Internet Access to Choose Your Plan. https://secure.covert‐wireless.
Camera overview This camera is a LTE cloud hunting camera. The features: Image Quality Lens PIR Detection Range (meter) PIR angle 3/5/8/12/16/20MP F/NO=1.8 FOV (Field of View)=58° Up to 20meter 54degree@4meter Video Quality WVGA/720P/1080P with Audio Trigger Time 0.
SD Overwrite Support Flash range Up to 20 meter Infrared LED's 40pcs 940nm LEDs Camera colour Camo Network LTE , real 4G network. AT&T: FDD-LTE B2/B4/B12; Frequency Bands UMTS/HSDPA/HSPA+ B2/B5 Verizon: FDD-LTE B2/B4/B5/B13 Free cloud platform with remote control features;Free Web-portal and APP (Android & iOS);Send VGA Wireless function pictures to cloud platform. Support retrieving high quality pictures or 5s WVGA video clips.
included);Supports 6V external power Other Interface Operation Temperature Operation Humidity Waterproofing Grade Mounting Size TF card(Max to 32GB), Nano-SIM, Operation/Storage Tem. -20 - +50°C / -25 +50°C 5% - 90% IP68 Belt/Cable Lock/Threaded/Adjustable angle bracket 4.5”x2.2”x4.
Purchasing your Plan: Follow these simple steps to activate or renew an AT&T plan: 1. Open your web browser to: https://secure.covert-wireless.com 2. Select the type of plan you'd like to add 3. Follow the prompts to select your rate plan, enter your personal/billing information and complete your purchase. 4. Log back into your account. 5. Enter the ICCID number located on the SIM card included with your camera.
7. Rename your camera in the nickname field provided. (OPTIONAL) Activating Multiple Cameras: Same Rate Plan‐ To activate multiple cameras on the same rate plan, simply enter the ICCID and IMEI number under said rate plan and click activate. Note: You can activate as many cameras as you’d like on a rate plan. Rate plans are a per device charge. Different Rate Plan‐ To activate cameras on a different rate plan, scroll to Purchase Additional Subscription Plans.
Other Plan Information: Page 11 Auto Renew: Covert Wireless plans automatically renew, however there is no long‐term contract. To opt out of your billing for certain months, simply hover over the “active” button and click. You will no longer be billed for services until you log back into your account and “click to activate.
Quick start your cameras: Prepare Before you start, you need to prepare a TF card(up to 32G), a Nano SIM card and 8 AA batteries. Please insert them correctly.
Connecting your Camera to Cloud Server Login a cloud account： a. Open:https://www.covert‐wireless.com/ b. b. If you already have an account just login. If not, register one with your email address, and fill out the necessary information.
Settings and Start You can change the camera settings via APP. Click ‘Save’ to save and send the settings. Slide the power switch to ‘ON’, the camera will receive settings and start to work.
The Light Information Status Light1 Red Green Light2 Yellow‐gree Slow flash Steady PIR is working Searching for signal Fast flash Low power Good signal Weak signal Sending pic tures
n Red No signal The camera begins to monitor When the two lights are off. Manual shooting You can manually shooting a picture and check if your APP has successfully received. Press the “RST” button when the light2 is green or yellow‐green. Camera will shoot a picture at once and send to cloud platform. The cloud platform will receive the photo within 30 seconds if the camera has good signal.
Customizing the camera settings with APP Camera Mode Photo Mode: You can change Photo Size, set Flash power, and Photo Burst in Photo Mode. Video Mode: You can further set the Video Size and Video Length. Picture +Video Mode: If you select the combination of photo and video, the camera will automatically take a 8MP picture and a video of 10s length with 720p resolution. Trigger Mode Settings PIR Sensitivity: The camera will react on movements and temperature changes(Low/ Auto/ High).
PIR function is opened all the time.5‐60 seconds in 5 seconds steps1‐5 minutes in steps of 1 minute5‐60 minutes in steps of 5 minutes) Time Lapse: Camera release at defined intervals:5‐60 seconds in 5 seconds steps1‐5 minutes in steps of 1 minute5‐60 minutes in steps of 5 minutes1‐8 hours in steps of 1 hour12,16,20,24 hours in steps of 4 hours. Time Frame Setting: Select ”ON” or” OFF”. Select a work time for the activity of the camera. You can select the weekdays and start‐stop time.
System Settings The following settings can be done. (Information about navigation please see chapter camera programming) Set Clock You can choose different date formats according to different countries to set date and time. Password: Select ”On” and enter a 4 digit code to protect the camera from unauthorized use. Be sure to note the password and store the code at a safe place. It will not be possible to reset the code on your own. Select “Off”, if you do not wish to use a password.
Enter a name that will be shown on each picture stamp. Overwrite Save the new data file to overwrite the old data file when TF card is full. TF card formatting: Delete all data of your memory card. Be sure that you won’t need the data any more. Default: With a reset to factory settings, all your own settings will be lost. Software Version: Indicate the software version in case of contact to our service agents.
AUXILIARY POWER: Your camera comes with astandar d 4mm Auxiliary power jack. Covert offersan auxiliary cable to extend your battery life with anexternal 6, 9 o r 12 volt battery. In order to use 12volt, you must use the Covert auxiliary batterycable. We also sell a Cover t Solar Panel to directlyhook up to your camera for opt imal battery usage.
Mounting To enhance the flash, we recommendpositioning the camera in an area with abackdrop to reflect the maxim um amount oflight. For instance, place the camera 20‐30’from a field edge facing the woods. For theinside of timber, positionin g the camera facing athicket approximately 20‐30’ aw ay. Try to set the camera up so it’s not facingdirectly into t he sun either in the morning orthe evening when ga me movement is at itspeak.
The FW version is reference to our engineers toensur e a speedy and efficient warranty repairshould the ne ed arise.
Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
RF exposure statement: The transmitter must not be colocated or operated in conjunction with any other antenna or transmitter. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.
