User's Manual

Quick Setup Guide
|
NS-CAHBTEP01/NS-CAHBTEP01-C
Bluetooth Earpods
PACKAGE CONTENTS
• Bluetooth earpods
• USB charging cable
• Quick Setup Guide
FEATURES
• Bluetooth 4.1
• Inline control, built in mic
• Up to six hours battery life for music
playback
• MicroUSB charging
CHARGING YOUR EARPODS
• When the red indicator LED blinks three
times a second, the battery is low. To
charge the battery, plug the microUSB
charging cable into your computer and
into the microUSB port on your earpods.
The red LED turns on to indicate that the
battery is charging and turns o when
fully charged.
Final flat size: 419.1 × 139.7 mm
Final fold size: 69.85 × 139.7 mm
FIND YOUR USER GUIDE ONLINE!
Go to www.insigniaproducts.com, then
click Support & Service.
Enter NS-CAHBTEP01 in the box under
Manual, Firmware, Drivers & Product
Information, then click ►.
# DESCRIPTION
1 + Volume Up
Next Track
2 Multi-function
Button (MFB)
(Power/Talk/Play/
Pause/Pairing)
3 Indicator LED
4 - Volume Down
Previous Track
5 Cable clamp
6 Micro USB port
7 Microphone
FUNCTION
Press + to increase the volume.
Press + to skip to the next track.
Press to turn on your earpods. If you
receive a phone call, press to talk.
Press to turn o your earpods.
Shows the current status of the
earpods.
Press - to decrease the volume.
Press - to skip to the previous track.
Use to clamp the cable to your
collar.
Plug the micro USB connector into
this port to charge your earpods.
Allows you to talk on the telephone.
USING YOUR EARPODS
Turning your earpods on and o
1 Place the earpod cable around your neck, then
clip the cable clamp to your collar. The inline
control falls naturally in front of your right
shoulder.
2 Press and hold the MFB for three seconds. The
LED blinks blue (when turned on) or red (when
turned o) and the voice prompt says “Power
on”, or “Power o.”
BLUETOOTH BASIC INDICATION
Bluetooth function indication
PAIRING YOUR EARPODS
Notes:
• Range is 33 feet (10 meters)
• Supports easy pairing
• Prompts you by saying “Device Connected,” when
connected
• Supports a battery indicator icon on an iOS device
Pairing with a cell phone or MP3 player
1 With your earpods turned o, press and hold
MFB for four seconds. The blue and red LEDs
blink alternately.
2 On your phone or MP3 player, select
INSIGNIA NS-CAHBTEP01 from the list of
discovered devices, then enter the password
0000 (four zeros) (if required) to pair your
earpods.
For more information on pairing Bluetooth
devices to your cell phone or MP3 player, see
the device’s documentation.
Note: After the earpods have been successfully paired
with the cell phone or MP3 player, the earpods will
automatically reconnect to the phone or MP3 player.
ACTION
Power on
Power o
Pairing mode
Play/Pause
Volume Up/Down
Next Track/Previous Track
Incoming call
Answer call
Reject call
Redial
Reset device list
OPERATION
Press and hold MFB more than two seconds
Press and hold MFB more than three seconds
Press and hold MFB more than four seconds in
power o mode
Press and release MFB button
Press and release + / - button
Press and hold + / - button
Press and release MFB when a call is incoming
Press and hold MFB when a call is incoming
Double press MFB
Press and hold MFB more than 10 seconds in
power o mode
LED INDICATION
Blue LED on 1.5 seconds
Red LED on 1.5 seconds
Blue and red LED blinking alternately
Blue LED blinks three times every
ve seconds when a call is received
All LEDs turn o
SOUND
“power on”
“power o”
Two short beeps
Two high beeps for maximum
volume. Two low beeps for
minimum volume
Ring tones
One short beep
One long beep
Two short beeps
Before using your new product, please read these instructions to prevent any damage.
v1
R2