MOTIONBLINDS MANUAL setup guide ROLLER BLIND MOTOR CMD-03 / CM-03 / CM-05
WARNING Read the instructions carefully before assembling and using the product. Assembly can be completed by non-professionals. For indoor use only. 2 Y oung children can strangle themselves with the loop of pull cords, chains and tapes, and cords that operate window coverings. To avoid strangulation and entanglement, keep cords out of reach of young children. Cords may ensnare a child’s neck. Move beds, cots and furniture away from window covering cords. Do not tie cords together.
Important Installation instructions WARNING: To reduce the risk of severe injury or death, it is important to follow these instructions for personal safety. Save these instructions. WARNING: Important safety instructions. Follow all instructions, since incorrect installation can lead to severe injury. ead and follow all installation instructions. R This motor can only be used with soft material This appliance can be used by children aged for driven parts.
FCC Manual FCC ID: ZY4CMD03B FCC ID: ZY4CM03B FCC ID: ZY4CM05B Regulatory Information 1 FCC Information for User This product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all applicable regulatory certifications and approvals. 2 FCC Electronic Emission Notices This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
Buttons and functions USB-C charging port LED (Battery/Reset indicator) End position button Pull control ENGLISH Reset/Program button 5
1 Install the blind Follow the steps in the installation instructions to install the blind. ount ide m 4x 2x zed otori ket M Brac Outs unt e mo Insid 2x 2x nt e mou Insid g in open from ions it inch 1/4 rew pos ct 1 Dedu idth for sc w 6 Activate the blind 1/8 " Max. 1/4 0_20 18 07 13 To activate the blind, connect it to a standard idth USB-C 5V power supply via a USB-C cable. ing w Open This can be your iPhone’s power adapter, for example.
3 Download the MotionBlinds bluetooth app App Store Download the MotionBlinds Bluetooth app rtube.nl/red1614 Google Play Download the MotionBlinds Bluetooth app rtube.nl/red1615 ENGLISH Download the Motion Blinds bluetooth app from the App Store. 7 4 Setup the blind Open the MotionBlinds bluetooth app and tap the + sign. The app will now guide you through the setup process. The end positions of the blind, top and bottom, are pre-programmed. These can be adjusted in the app.
5 Hide the MotionBlinds Setup Code Slide the tassel up and rotate a quarter turn to hide the MotionBlinds Setup Code into the tassel. MAC:2303 MAC:2303 8 6 Adjustments Change direction of rotation : If the position of the blind in the app is opposite to your blind, change the direction of rotation by pressing the End Position button twice within one second. Change end positions : If the blinds end positions are incorrect please open the settings of the blind and adjust the bottom / top position.
Pair a remote control .1 Select a channel on the remote and press the program button on the motor to activate program mode. The blind will start stepping up and down. CM-11 CM-12 CM-13 CM-15 CM-17 Pair button Pair Pair button button Press the pair button on the back of the remote control to pair the blind with the selected channel.The blind will shortly stop stepping, indicating that the remote has been paired to the blind. .3 Shortly press the program button to deactivate program mode.
Recharge the blind To charge the blind, connect it to a standard USB-C 5V power supply via a USB-C cable. This can be your iPhone’s power adapter, for example. LED light flashes red during operation; Charge the battery LED light flashes green; battery is charging LED light constantly green; battery is fully charged 10 Reset the connection Hold the program button for 10 seconds to delete the connection between the blind and the app.
Reset the blind Resetting the blind results in deleting the end positions and connections of the blind with apps and remote controls. Shortly press the program button to activate program mode. The blind will start stepping up and down.Hold the reset/program button for at least 20 seconds to reset the blind. The blind will stop stepping twice. After the second stop, the blind will give one extra step to indicate that is has been reset.
Coulisse B.V. Vonderweg 48, 7468 DC Enter, The Netherlands CM03BLE-SE-U-R0 motionblinds.
