User's Manual

ISSUED DATE：2008-2-4 REVISION NO：A
PREPARED BY：Charles Lin APPROVED BY：
5) NOT USE IN MOIST SPOT AND AIRTIGHT LAMP FIXTURE.
SHUNDE CORSO ELECTRONICS CO., LTD.
ENERGY SAVING LAMP
USER MANUAL
● THIS ENERGY SAVING LAMP MUST USE SUITABLE LAMPBASE.
● MAY USE ON A STABLE SOURCE OF VOLTAGE THAT FLUCTUATES IN WIDE RANG-AC
120V 60Hz.
●THIS ITEM MAY REPLACE INCANDESCENT LAMP TO USE IN
INDOOR,OUTDOOR,RESIDENTIAL AND COMMERCIAL LIGHTING.
● WHEN FIX LAMP, PLEASE TAKE THE PLASTIC CASE, DO NOT TAKE THE TUBE.
4) UNSUITABLE FOR APPLICATION WHEN THE LAMP MUST TURN ON AND OFF
FREQUENTLY.
6) THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXIT FIXTURES OR
EMERGENCY EXIT LIGHTS
● NEVER USE IN THE FOLLOWING CONDITIONS:
●CAUTION：RISK OF ELECTRIC SHOCK-USE IN DRY LOCATIONS ONLY. NOT FOR USE IN
TOTALLY ENCLOSED RECESSED FIXTURES. NOT FOR USE WHERE EXPOSED TO THE
WEATHER.NOT FOR USE WITH DIMMERS.
1) POWER SUPPLY WITH LOW VOLTAGE DC SUCH AS EMERGENCY LIGHT.
2) DIMMING CIRCUIT FIXTURES.
3) WHERE WATER MAY DROP ON THE LAMP.
第 1 页，共 2 页
4/25/2008 6:45 PM