SDS

ManualsBrandsCorrosion Block ManualsHand Tools32 oz. Anti-Corrosion Lubricant

Corrosion Block BULK Liquid (prepared to GHS Rev.5) SAFETY DATA SHEET

Date of Preparation: March 11, 2015 Page 1 of 5

SECTION I - INDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING

Product Name: Corrosion Block® BULK Liquid

Product Code: 20004, 20020, 20032

Use of Substance/Preparation: Corrosion Block® is an industrial product designed to prevent and treat corrosion on non-ferrous and ferrous

metals, protect electronic equipment, and to lubricate/penetrate mechanized parts.

Manufacturer: Lear Chemical Research Corp.

PO Box 1040 Mississauga ON Canada

Telephone: 905 564-0018 905-564-7077 (fax)

Email: info@learchem.com

www.learchem.com

Emergency Telephone: 1 800-256-2548 (day) 1 905-890-3466 (night)

Date of Preparation March 11, 2015

SECTION 2 – HAZARDS INDENTIFICATION

Appearance: Blue green Physical State: Liquid Odor: Aromatic

Health: Acute Toxicity

Oral-Eye-Dermal: Category 5

Inhalation: Category 4

Environmental: Not Classified

OSHA Defined: Not Classified

Labels:

Signal Word: WARNING

H227: Combustible Liquid

P210: Keep Spray Away From Open Flame

H305: May be harmful if swallowed and enters airways

P331+P314: Do Not Induce Vomiting, Get Medical Attention if Feeling Unwell

H320: May Cause eye irritation

P305+P331+P358: If Sprayed Into Eyes Rinse with Water, Remove Contacts if Present, Continue to Rinse with Water

Precautionary Statements – Prevention: Wash thoroughly after handling. Avoid splashing in eyes or breathing mist/spray. Do

not ingest.

Precautionary Statements – Response

Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Rinse

eyes with water

Precautionary Statements – Storage: Store in a well-ventilated place

Precautionary Statements – Disposal: None

Hazards not otherwise classified (HNOC)-Not Applicable

Summary of content (5 pages)

PAGE 1
SAFETY DATA SHEET Corrosion Block BULK Liquid (prepared to GHS Rev.5) SECTION I - INDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Product Name: Corrosion Block® BULK Liquid Product Code: 20004, 20020, 20032 Use of Substance/Preparation: Corrosion Block® is an industrial product designed to prevent and treat corrosion on non-ferrous and ferrous metals, protect electronic equipment, and to lubricate/penetrate mechanized parts. Manufacturer: Lear Chemical Research Corp.
PAGE 2
SAFETY DATA SHEET Corrosion Block BULK Liquid (prepared to GHS Rev.5) SECTION 3 – COMPOSITION/INFORMATION ON INGREDIENTS Hazardous substances present on their own: None Substances present at a concentration below the minimum danger threshold: NAME: Solvent naphtha Hydrotreated neutral oil CAS 64742-88-7 72623-85-9 EC 265-191-7 276-736-3 % 5-15 70-100 SECTION 4 - FIRST AID MEASURES Eye Contact: Rinse thoroughly with plenty of water, also under the eyelids. If symptoms persist, call a physician.
PAGE 3
Corrosion Block BULK Liquid (prepared to GHS Rev.5) SAFETY DATA SHEET SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION: Appropriate Engineering Controls: Ventilation: Provide sufficient General or Mechanical ventilation to maintain exposure below flammable limits.
PAGE 4
Corrosion Block BULK Liquid (prepared to GHS Rev.5) SAFETY DATA SHEET SECTION 11 - TOXICOLOGICAL INFORMATION Corrosion Block liquid has been tested (oral, eye, dermal) as a complete mixture and is considered “non-toxic” under normal use with an extremely low order of toxicity at or below a Category 5 rating .
PAGE 5
SAFETY DATA SHEET Corrosion Block BULK Liquid (prepared to GHS Rev.5) SECTION 14 - TRANSPORT INFORMATION Land transport ADR/RID (cross-border) ADR/RIC-GGVS/E Maritime transport IMDG: Marine pollutant: AIR transport ICAO-TI and IATA-DGR: Not Regulated Not Regulated Not expected to be. Non-Hazardous, Non-Regulated SECTION 15 - REGULATORY INFORMATION This preparation was classified in compliance with GHS Directives and is not known to be classified on any EC lists or other source literature. WHMIS U.S.