Installation & Assembly

Installation Instructions
1. S
hut off main power at circuit breaker before attempting to install
l
uminaire.
2.
In
stall mounting plate to junction box in ceiling using mounting
screws.
3.
S
ecure the two screws to the mounting plate. You should leave the
p
roper length of the two screws beyond the surface of the mounting
p
late to ensure enough thread is available to properly mount the
canopy with the Mounting Screws.
4. Pull the existing electrical wires out of the junction box and make
proper connections using wire nuts.
5.
P
osition canopy over mounting plate and align holes in canopy with
m
ounting screws . With thread protruding through canopy surface,
th
read and secure two screws.
INS
TALLATION
Use UL listed wire connectors for connections.
W
ARNING
Turn off the main power at the circuit breaker
before installation,replacing lamp or maintenance.
Installation must be performed by a qualified
electrician.
To ensure the success of the installation,be sure
to read these instructions and review the diagrams
thoroughly before beginning.