Everon 6200 A3-E3-N3 Specification Sheet Corning Optical Communications E62-A3-E3-N3 Specification Sheet | 28 March 28, 2022 | Page 1
Features 1200MHz Transmission Bandwidth over 1 fiber 8 x 3GPP Band per Remote Sub 6GHz Up to 200MHz IBW Dry contact Alarm 25dBm Maximum Output Power per Band Support Band or Channel Selective filter Cascading up to 6 levels E62-A3 - Access Unit Chassis The E62-A3 – Access Unit Chassis is a standard 19-inch 2U rack-mounted shelf (1U fan unit included), which serves as the host for Everon™ 6200.
E62-AU-AC – Active Combiner Module The E62-AU-AC – Active Combiner Module is the interface to the operator base station signal source equipment. Each module has four QMA ports for signal input from the maximum four operators. One Access Unit can be equipped with up to four modules. In accordance with wireless service provider standards, it is not advised to use digital repeaters as a signal source for Corning solutions.
The E62-N3RU is a low-power remote unit supporting cellular technologies on fiber optic cable using the CPRI protocol. The N3 is ideal for multi-operator multi-band, static capacity distribution deployments of cellular services in small-to-medium coverage areas. The N3 supports up to four 25 dBm RF channels. The N3 converts an optical signal to RF and then transmits at the relevant 3GPP band and receives the analog RF signal, conditions it, and converts it back to optical for routing to the E3 or A3.
C-Band-2 n77 Interface Access Unit RF Interface Optical Connector Type Transmission Rate AU-AC modules Band Support Dry contact Alarms Maintenance Interface AU-AC power level (dB) Electrical Electromagnetic Compatibility/Interference (EMC/EMI) Maximum Power Consumption AC Power DC Power Environmental Mean Time Between Failure (MTBF) Operating Temperature Storage Temperature Humidity Cooling Installation Ingress Protection Rating Mechanical AU (Width / Height / Depth / Weight) 3700-3980 3700-3980 200
Mean Time Between Failure (MTBF) Operating Temperature Storage Temperature Humidity Cooling Installation Ingress Protection Rating Mechanical E3-O (Width / Height / Depth / Weight) > 220,000 hours -10°C to +45°C -40°C to +85°C 0% to 90% (Noncondensing) Passive Wall or 19-in Rack IP30 (Indoor) 440 mm / 44 mm / 220 mm / 6.0 kg 17.32 in / 1.73 in / 8.66 in / 13.
Transmission Rate Optical Fiber Length Cascading Maintenance Interface Electrical Electromagnetic Compatibility/Interference (EMC/EMI) Maximum Power Consumption DC Power 1x optical connection to lower level N3 25 GB/s 10km Up to 5 x E3-O per Optical connection Ethernet RJ45 3GPP TS38.
System Topology Fiber OP3 Band 1_B Fiber Fiber E3-O-3 Fiber OP6 AU1 Band 1_D Fiber slave Fiber master slave Band1_MIMO 4x4 Fiber Band2_MIMO 2x2 Band3_MIMO 2x2 Band5 Band6 Master OP1/AU 2_A 2_B 3_A 3_B Secondary A3 Band Band Band Band 4_A 4_B 5 6 Secondary A3 slave Band1_MIMO 4x4 Band2_MIMO 2x2 AU2 Band Band Band Band master slave Fiber Band 1_C Network Management System E3-O-2 master N3RU-1 OP13 OP14 Fiber slave OP1 OP2 OP2 E3-O-1 Fiber OP13 OP14 OP1/AU OP1 OP
Corning Optical Communications LLC • 4200 Corning Place • Charlotte, NC 28216 USA 800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm Corning Optical Communications reserves the right to improve, enhance, and modify the features and specifications of Corning Optical Communications products without prior notification. A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks.