Spec Sheet

ManualsBrandsCorning Optical Communication ManualsElectronicsDigital Low-power Remote Unit High Band Supporting 2.5G

Corning Optical Communications

Everon™ 6000 Gen 2 DAS Solution Specification Sheet | CMA-818-AEN

Corning Restricted

Everon

™

6000 Gen 2 DAS Solution

Specification Sheet

Features and Benefits

Corning’s Everon 6000 Gen 2 DAS Solution is an advanced inbuilding cellular service solution for small, medium, and

large size venues, supporting a broad range of cellular generations: 3G,4G and 5G.

This solution is based on a point-to-multipoint distribution architecture, advanced digital transport and processing, and

channelized implementation, enabling efficient utilization of digital links. It is designed to support multi-band, multi-

technology, and multi-operator networks over the single fiber-based infrastructure.

The Corning Everon™ 6000 Gen 2 DAS Solution is a high bandwidth distribution architecture that provides preparedness

for future radio technologies, broader spectrum, and new frequency bands. Due to its modular design and configuration

flexibility, this solution is highly scalable in terms of supported capacity (number of sectors, frequency bands, channels)

and remote units (coverage), and can be easily configured to support a large variety of deployment scenarios including

single and multi-building (“campus”) network topologies.

This solution offers multiple types of digital remote units, supporting a variety of frequency band combinations, with

different power levels ranging from 20 dBm per band to 46 dBm per band. Advanced network configuration and

management capabilities enable on-site as well as remote end-to-end configuration, system diagnostics, maintenance,

and support network operations center (NOC) connectivity.

Features

Benefits

Comprehensive Service Support

600 MHz, 700 MHz, FirstNet, 800/850 MHz, 1900 MHz (PCS), EAWS,

2300 MHz (WCS), 2500 MHz (TDD), 3500 MHz (TDD). Support of MIMO

services, FDD and TDD. Supports 3G, 4G, 5G technologies.

Multi-X System

Supports multi-operator, multi-band, multi-technology services over a

single infrastructure. Supports single and multi-building (“campus”)

network solutions.

Highly Modular/Highly Scalable

Can be easily expanded to support additional capacity: sectors,

frequency bands, channels, and coverage areas, by increasing the

number of remotes.

Advanced Digital Signal Processing

Provides higher dynamic range, enables per-channel granularity,

delivers enhanced overall power efficiency, and improves overall system

performance.

Digital Common Public Radio Interface

(CPRI) based Transport

Provides robust signal distribution with flexible scalability.

Digital Service and Capacity Routing

Enables advanced capacity and coverage management through flexible

routing configuration management.

Carrier-Grade Network Management

Network configuration and management capabilities enable on-site and

remote end-to-end configuration, system diagnostics, maintenance,

support management and control by network management system.

Summary of content (18 pages)

PAGE 1
Everon™ 6000 Gen 2 DAS Solution Specification Sheet Features and Benefits Corning’s Everon 6000 Gen 2 DAS Solution is an advanced inbuilding cellular service solution for small, medium, and large size venues, supporting a broad range of cellular generations: 3G,4G and 5G. This solution is based on a point-to-multipoint distribution architecture, advanced digital transport and processing, and channelized implementation, enabling efficient utilization of digital links.
PAGE 2
System Architecture: Everon™ 6000 Gen 2 Solution Radio Interface Units Digital Conversion Units Distributed Extension Units Base stations Service Provider #N Low Power Remote Units A DLRU Medium Power Remote Units A RIU A DEU A DCU A DMRU High Power Remote Units A DHRU Remote Operator Configuration and NMS Local Configuration RIU—Radio Interface Unit The RIU provides an interface and signal conditioning to signals coupled between the base station RF antenna ports and the DCU.
PAGE 3
dLRU—Digital Low-power Remote Unit The dLRU is a low-power remote antenna unit with 20~24 dBm per MIMO stream per band output RF power and native support of 2x2 MIMO antenna scheme. There are four types of dLRU: 1. Low band dLRU - supports 600 MHz (band 71), 700 MHz Low (band 12), 700 MHz High (band 13), FirstNet (band 14), 800/850 MHz (band 26) bands via one fiber connection. 2. Medium Band dLRU - supports EAWS (band 66), PCS (band 25), WCS (band 30) and 2.
PAGE 4
Specifications Digital Conversion Unit (DCU-G2) RF donor connection: 600 MHz ~ 4000 MHz 14 x 25Gbps Optical Interface for extension/cascading Integrated OMT & remote management system RF Specification Bands Technologies Frequency Range (MHz) 3500 MHz LTE/NR TDD:3400~4000 2500 MHz LTE/NR TDD:2496~2690 WCS LTE/NR UL:2305~2315, DL:2350~2360 EAWS LTE/NR UL:1695~1780, DL:2110~2200 PCS LTE/NR UL:1850~1915, DL:1930~2020 850A LTE/NR UL:817~849, DL:862~894 700U LTE/NR UL:776~798, DL:746~768
PAGE 5
Dimensions (H x W x D) Inch (mm) 3.46 x 19.09 x 15.75 (88 x 485 x 400) Weight (approx.
PAGE 6
Distributed Extension Unit (DEU-G2) Radio hub/router for system extension 28 x 25 Gbps Optical Interface Support DEU cascading Interfaces and Mechanical CPRI Ports 4 x SFP+ (25 Gbps) for DEU cascading CPRI Ports 24 x SFP+ (25 Gbps) for dLRU/dMRU/dHRU connection Ethernet Ports 1 x RJ45 - local & remote monitor Dimensions (H x W x D) Inch (mm) 1.73 x 19.09 x 14.17 (44 x 485 x 360) Weight (approx.) Lbs (kg) 13.
PAGE 7
Distributed Extension Unit (DEU-G2-PS) Radio hub/router for system extension 28 x 25 Gbps Optical Interface Support DEU cascading PSU for dLRU Interfaces and Mechanical CPRI Ports 4 x SFP+ (25 Gbps) for DEU cascading CPRI Ports 24 x SFP+ (25 Gbps) for dLRU/dMRU/dHRU connection Ethernet Ports 1 x RJ45 - local & remote monitor Dimensions (H x W x D) Inch (mm) 3.46 x 19.09 x 14.17 (88 x 485 x 360) Weight (approx.) Lbs (kg) 26.
PAGE 8
digital Low-power Remote Units-2.5G (dLRU-G2-25) 194 MHz IBW with 2T2R MIMO 1 x 25 Gbps Optical Interface to DEU Compact design for easy installation RF Specification Frequency Range MHz 2496-2690 Max.
PAGE 9
Regulation EMC EMC FCC 47 CFR Part 15 sub part B Safety UL62368-1 Radio FCC CFR 47, Part 27 Corning Optical Communications Everon™ 6000 Gen 2 DAS Solution Specification Sheet | CMA-818-AEN
PAGE 10
digital Low-power Remote Units High Band (dLRU-G2-35) 530 MHz IBW with 2T2R MIMO 2 x 25 Gbps Optical Interface to DEU Compact design for easy installation RF Specification Frequency Range MHz 3450-3980 Max.
PAGE 11
Regulation EMC EMC FCC 47 CFR Part 15 sub part B Safety UL62368-1 Radio FCC CFR 47, Part 27 Corning Optical Communications Everon™ 6000 Gen 2 DAS Solution Specification Sheet | CMA-818-AEN
PAGE 12
digital Medium-power Remote Unit-2.5GHz (dMRU-G2-25) 194 MHz IBW with 2T2R MIMO 1 x 25 Gbps Optical Interface to DEU Compact design for easy installation RF Specification Frequency Range MHz 2496-2690 Max.
PAGE 13
Cooling Convection Fan (Optional for extreme cases) Mounting and Installation Wall/19-in Rack mount Regulation EMC EMC FCC 47 CFR Part 15 sub part B Safety UL62368-1 Radio FCC CFR 47, Part 27 Corning Optical Communications Everon™ 6000 Gen 2 DAS Solution Specification Sheet | CMA-818-AEN
PAGE 14
digital Medium-power Remote Unit High Band (dMRU-G2-35) 530 MHz IBW with 2T2R MIMO 2 x 25 Gbps Optical Interface to DEU Compact design for easy installation RF Specification Frequency Range MHz 3450-3980 Max.
PAGE 15
Fan (Optional for extreme cases) Mounting and Installation Wall/19-in Rack mount Regulation EMC EMC FCC 47 CFR Part 15 sub part B Safety UL62368-1 Radio FCC CFR 47, Part 27 Corning Optical Communications Everon™ 6000 Gen 2 DAS Solution Specification Sheet | CMA-818-AEN
PAGE 16
Radio Interface Unit-2.5 GHz (RIU-G2-25) 8 input ports for donor RF signal connection Active ATT, input power detection & ALC protection for RF module Max.
PAGE 17
Radio Interface Unit-3.5 GHz (RIU-G2-35) 8 input ports for donor RF signal connection Active ATT, input power detection & ALC protection for RF module Max.
PAGE 18
Antenna Multiplexer(COMB-G2-FDD-25-35) 6-in/2-out multiplexer for 2X2 MIMO 6 input ports for low, medium, and high band remote radio unit connection 2 output ports for antenna connection Compatible with both low- and medium-power remote radio unit Electrical Characteristics Port Port1, Port4 (FDD Bands) Port2, Port5 (2.5 Band) Port3, Port6 (3.5 Band) Frequency Range MHz 617-2360 2496-2690 3450-4000 Bandwidth MHz 1743 194 550 Insert Loss dB ≤0.6(25°C) ≤1(-40 to +85°C) ≤0.