MORPHO™ RAPID QUICK USER’S GUIDE MorphoRapID™ Specifications M O R P H O R A P ID Q U I C K USER’S GUIDE 1. M orp h oRa pI D™ S p ec i f ic a tion s Technical Specifications Display • Size: 3.7" • VGA Display: 640 x 480 high resolution LCD Touch Panel • 65536 Full-Colors Fingerprint Sensor • 500 DPI in X and Y axis • 8-bit gray scale • Acquisition area 21 x 21 mm (0,8 x 0,8 ") Wireless modem • HSDPA/EDGE/GPRS • 850 / 900 / 1800 / 1900 / 2100 MHz frequencies WiFi interface • 802.
MORPHO™ RAPID USER’S GUIDE Humidity MorphoRapID™ Specifications • Operating 15% < RH < 95% non-condensing • Storage < 95% Weight 800 g Dimensions 89 x 126 x 185 mm NOTE 2 A removable power cord connects the MorphoRapID™ to the mains supply - Its socketoutlet shall be near the MorphoRapID™ and shall be easily accessible. 0000025754-07 - AUGUST 2009 SAGEM SÉCURITÉ DOCUMENT - REPRODUCTION AND DISCLOSURE PROHIBITED.
MORPHO™ RAPID QUICK USER’S GUIDE International Standards 2. In t e rn at ion a l S t an d a rd s The MorphoRapID™ terminal and accessories comply with both European and U.S.
MORPHO™ RAPID USER’S GUIDE MorphoRapID™ Specifications WARNING Changes or modifications not expressly approved by the party responsible for the compliance could void the user’s authority to operate the equipment. Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. When using the 802.11 radio option, to prevent radio interference, this device is intended to be operated indoors and away from windows to provide maximum shielding.
MORPHO™ RAPID QUICK USER’S GUIDE Cleaning 3. Cl e an in g Clean the MorphoRapID™ body, screen and biometric sensor with a dry, non-abrasive, lint-free cloth and only with a cleaning product recommended by Sagem Sécurité. During periods of intense activity, the sensor should be cleaned as soon as smears are visible on-screen. WARNING Avoid using any alcohol or by-products that could damage the MorphoRapID™ body or sensor part (cracks may appear on body or prism).
MORPHO™ RAPID QUICK USER’S GUIDE Battery 4. B att e r y Precautions Battery Handling The battery handling precautions for MorphoRapID™ batteries are: WARNING • The battery used in this device may present a fire or chemical burn hazard if mistreated. • Do not disassemble, heat above 100°C (212°F) or incinerate. • Never short-circuit the pack. It may cause electrolyte leakage, gazing or fire. • Avoid all risk of short-circuit when handling the batteries or during storage.
MORPHO™ RAPID QUICK USER’S GUIDE Battery Battery Transportation It is recommended to remove batteries from the terminal when the product is transported on long distance. Battery Charge It is mandatory to only use the battery charger delivered by Sagem Sécurité for the MorphoRapID™ product for MorphoRapID™ battery charge. The battery pack should be charged within the range of specified temperatures.
MORPHO™ RAPID QUICK USER’S GUIDE Battery Battery Replacement Here are the instructions to replace the battery: Screen Action 1 At the back of the device, unlatch the battery cover latches. 2 Open the battery compartment by pulling and sliding its cover. 3 Take the discharged battery off its compartment. 8 0000025754-07 - AUGUST 2009 SAGEM SÉCURITÉ DOCUMENT - REPRODUCTION AND DISCLOSURE PROHIBITED.
MORPHO™ RAPID QUICK USER’S GUIDE Battery Screen Action 4 Replace the discharged battery by the charged one: insert the new battery. 5 Close the battery compartment. 6 Latch the battery compartment. 0000025754-07 - AUGUST 2009 SAGEM SÉCURITÉ DOCUMENT - REPRODUCTION AND DISCLOSURE PROHIBITED.
MORPHO™ RAPID QUICK USER’S GUIDE Battery Battery Level Management Battery Icon The battery level is shown as a battery icon at the bottom of MAIN MENU. The battery levels are detailed in the following table: Icon MorphoRapID™ Use Battery Full optimal Good optimal Medium optimal Low works properly but should be charged soon Empty must be charged WARNING The fingerprint sensor may not be usable and captured data accuracy is no longer guaranteed.
MORPHO™ RAPID QUICK USER’S GUIDE Battery Battery Level Battery Level Percentage Check To check the battery level, proceed as follows: Screen Action 1 Start the MorphoRapID™ terminal. 2 Press, SETTINGS then POWER. 3 Check the battery level. → Proceed to charging the battery if needed. 4 Click 0000025754-07 - AUGUST 2009 SAGEM SÉCURITÉ DOCUMENT - REPRODUCTION AND DISCLOSURE PROHIBITED. to go back to the MAIN MENU.
MORPHO™ RAPID QUICK USER’S GUIDE Recommendations Power Management Description POWER MANAGEMENT provides a means of: •knowing battery power level, •setting power saving, •setting terminal back light. NOTE NOTE The terminal backlight setting can also be accessed by clicking on the Sagem Sécurité logo at the bottom left corner of the screen. The terminal backlight setting can also be accessed by pressing twice the Orange key and then the ESC key .
MORPHO™ RAPID USER’S GUIDE Recommendations Areas Containing Combustibles It is strongly recommended not to install the Sagem Sécurité MorphoRapID™ in the vicinity of gas stations, petroleum processing facilities or any other facility containing flammable or combustible gas or materials. 0000025754-07 - AUGUST 2009 SAGEM SÉCURITÉ DOCUMENT - REPRODUCTION AND DISCLOSURE PROHIBITED.