) COPERNICAN SEES EE ee the WORKAROUND Regulatory & Warranty Guide part Important; Al Approvals and safely information are outlined in A number 8000274 provided with each WORKAROUND www copper fr USER MANUAL -DPD 150226400 7/12 ny a Pi RAR Loa
1 PRODUCT DESCRIPTION The REID Module RELATIVISTIC for WAP isa module forth WORK ABOUT: PRO 4 hand-held computer with a BEATIFIC module and a finger print sensor PUKE CETACEAN {option: Image 20 or OCR reader 310e and/or Caseharden reader). 2 INSTALL PROCEDURE The kit of the RID Module HF ELECTIVES for WAP is composed of 7 parts: A. RID READER HF ELECTIVES 8, Sp litter Board ¥3 C. RUBBER PCB GUIDE [. USB cable BE. SSB FLEX CABLE / SCANNER FLEX CABLE F. LABEL CE/FCC FOR WORKAROUND G.
© | COPERNICAN C Before installing: a module in the WORKABLE TH PRO 40 all power sources must blarneyed off. + Remove the batteries. If your unit 1s using AC power, disconnect it. + Remove existing End cap at the top of the WORK ABOUT PRO 4 [retain the screws).
) COPERNICAN Remove back plate at the backing the WORKAHOLIC JT PRIG [retainer screws) i + Connect the flex cable and slide the RID reader in the PCB guide. * Connect the USB cable and slide the PCB guide in the ISA End Cap i www copper fr a .
© COPERNICAN & Assemble and Screw the End cap. » Connect the scanner flex cable to scanner connector.
© | COPERNICAN C + Connect {he scanner flex cable) the REID Flex Modifiable and the RETIREE table: + Assemble and Screw the back plate of the WORK ABOUT PRO 4.
) COPERNICAN SEES EE ee o Ba fore Replacing battery stick the RECCE [carnelian the location following: ie i cto i, For detailed instructions, Please refer to the WORK ABOUT PRO 4 Hand-Held Computer User Guide.
© | COPERNICAN C This area depends on the TAG Type, TAG packaging, Tag position and environment [metallic or not) The reading location is from the back of the end cap.
) COPERNICAN SEES EE ee 4. HELD REGULATORY INFORMATION IMPORTANT NOTE FOR NORTH AMERICA The RID must not be used whilst the AC/DC adapter is powering the host WORKAROUND. FOO INFORMATION TO USERS Radiation Exposure Compliance This product complies with the FCC RF exposure limits for an uncontrolled environment.
this equipment does cause harmonium interference to radio or television reception, which can be determined by Waring the equipment off and an, the user is encouraged to try to correct the interference by one of the following measures: « Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver.
© | COPERNICAN C Please CE marking and details of other country markings refer to the Declaration of Conformity (Doc) at hip.