We offer a limited warranty that this product is free from defects in materials and workmanship for a period of one (1) year from the original date of purchase. At its discretion, we may provide replacement parts for defective parts to original purchaser after its own review and examination. Original receipt or proof of purchase as well as proof of defect is required. We will not be responsible for shipping costs incurred outside the continental USA.
To reduce the risk of serious injury, read the following safety instructions thoroughly before assembling and using the gazebo. * Check with your local governing authority/local municipal codes regarding installation and permitting of such structures before assembly. ยข Use of personal protective equipment including gloves, safety glasses, and closed toe footwear is recommended during assembly. * Requires two or more people to assemble and install safely and correctly.
Part Sketch No.
Before proceeding with Step 4, ensure that the frame is rectangular by ensuring the diagonal dimensions are identical, the beams are level and that the posts are at 90 degree angle to the beams and are plumb.
Note: 1. Let one person stand on the ladder to lift "1.2" and hold and let others fasten the screws connecting both ends of "D". 2. Please hold "L2" until all the "D" screws are installed.
Attention: Please make sure the groove sides of the pane! face outwards. When installing the Roof Plates (52) onto short side, please detach the right end of Roof Rib (G1) first. And then install the right end of Roof Rib (G1) again after S2 is installed.
Note: When install the rooftop plates, if the roof plates are slightly uneven, please press the screws from the top of the plates until the bottom screw thread is exposed and then screw on the nut.