Prevail LED area, site and roadway luminaire Lumark
Prevailing innovation. Remarkable savings. Architectural design delivers on value Advanced design delivers savings The Lumark Prevail TM LED area/site luminaire combines impressive aesthetics, ease of installation features and state-of-the-art optical control resulting in significant installation and energy savings.
Area/site Wall mount Pathway
Value engineered design The Prevail LED luminaire delivers exceptional performance in a scalable, low-profile design. The precision engineered optics provide uniform illumination to walkways, parking lots, roadways, building areas and security lighting applications. Able to replace HID fixtures ranging from 150W up to 450W, the Prevail LED luminaire is designed to meet the toughest lighting challenges.
A15 (Single LED = 6,100 nominal lumens) A25/A40/A60 (Dual LEDs = 10,200/15,100/18,900 nominal lumens) Integrated sensor (Optional) Standard versatile mounting arm (Patented) Low-profile architectural design Mounting options House side shield Arm mount Wall mount Mast arm mount For stringent light trespass requirements and the ultimate level of backlight control, a house side shield accessory is available for factory or field installation.
Retrofit and installation has never been easier Time is money when it comes to installing and retrofitting area and site luminaires. The Prevail luminaire's patened, standard versatile mounting arm was engineered to make installation quick and easy, saving on both installation time and costs. Optional wall and mast arms are also available for even more design flexibility for any building mount, street and roadway applications.
Application excellence Uniform illumination Easily replacing a 400W HID site fixture, the Prevail LED luminaire is the solution whether retro-fitting an existing site or lighting a new location. Four optical distributions allow the lighting designer to put light exactly where it’s needed without wasting energy with extra light spilling onto unwanted locations. An optional house-side shield is available when extreme cut-off is needed at the property lines.
Dimming and occupancy Area/site applications For outdoor area/site applications, lighting should be dimmed or turned off according to pedestrian traffic and safety requirements. Scheduled dimming and occupancy detection can be combined to reduce maximum lighting levels outside business hours. Upon occupancy detection, the luminaire returns to full lighting to maintain security lighting levels.
Lighting management and control Light level automation A 30-50 percent reduction of energy use is not uncommon as a result of combining basic lighting control strategies. The LumaWatt Pro system employs four control strategies to automate luminaire behavior: Scheduled ON/OFF, Scheduled Dimming, Occupancy Detection and Daylight Harvesting. Lumawatt Pro outdoor wireless control and monitoring system Different environments pose different challenges when balancing power reduction against usage requirements.
Energy savings Reduced energy consumption Operating and maintenance costs of a lighting system are dramatically impacted by the specified lamp source, system power consumption and the duration time of operation. Total system input watts and fixture operating life should be the driving considerations when addressing energy consumption and total cost of ownership. Energy savings increase when energy consumption is reduced and maintenance intervals are extended.
Ordering information Sample Number: PRV-A25-D-UNV-T3-SA-BZ Product Family 1, 2 Light Engine 3 Driver 4 Voltage Distribution Mounting Color 6 PRV=Prevail A15=(1 LED) 6,100 Nominal Lumens A25=(2 LEDs) 10,200 Nominal Lumens A40=(2 LEDs) 15,100 Nominal Lumens A60=(2 LEDs) 18,900 Nominal Lumens D= Dimming (0-10V) UNV= Universal (120-277V) 347=347V 480=480V 5 T2=Type II T3=Type III T4=Type IV T5=Type V SA=Standard Versatile Arm MA=Mast Arm WM=Wall Mount Arm AP= Grey BZ= Bronze (Standard) BK=Black DP=
Lighting Product Lines Halo Halo Commercial Portfolio Iris RSA Metalux Corelite Neo-Ray Fail-Safe MWS Ametrix Shaper io Lumark McGraw-Edison Invue Ephesus Lumière Streetworks AtLite Sure-Lites Controls Product Lines Greengate iLumin Zero 88 Fifth Light Technology iLight (International Only) Connected Lighting Systems LumaWatt Pro WaveLinx Distributed Low-Voltage Power ConnectWorks Eaton 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.eaton.