Spread Spectrum Transmitter Model T100-900 User Manual Rev A Copyright 1998 OMNEX Control Systems Inc. All rights reserved.
1 SAFETY 1.1 • • • 1.2 General Read all instructions before operating equipment Save these instructions for later use. Follow all warnings and instructions Battery Use only standard AA alkaline batteries in the unit. Use of any other types will invalidate any approval or warranty applying to the product, and may be dangerous. 1.3 Labels Your transmitter has a label on it, which is important for service and related purposes. Be careful not to lose the label or the information there.
2 USER GUIDE 2.1 Configuration 2.1.1 Power Configuration The unit can operate in several different power-on modes: MODE # ON/OFF SWITCH DESCRIPTION Unit turns ON when ON switch pressed and Off when OFF switch pressed. A. B. C. " Unit turns ON when any function depressed • • • • • • • • • When unit is first turned ON or any time the ON button is pressed, data is transmitted When a change of state takes place, data is transmitted.
B. TOGGLE Each output pair is independently toggled and latched. Every time a button is pressed, its corresponding output toggles. In the event of loss of carrier, the status of the output will either retain its state or turn OFF depending on the POWER ON mode selected. C. INTERLOCKED Each of the 8 outputs are paired. Within each pair, only one output can be on at one time (ie. interlocked). The default outputs shall be odd numbers OFF and even numbers ON.
