Submittal Sheet

ManualsBrandsCooper B-Line ManualsAir Conditioning Installation PartsDBE Series Dura-Blok Support w/ Rod Risers & Channel (5-1/2" to 8" x 6" x 9.6")

Our DURA-BLOK products gives you a versatile and long-term solution for all your roof top support needs. Designed

with flexibility in mind, DURA-BLOK is ideal for roof top support applications such as pipe, HVAC, duct, conduit, cable

tray, and roof walkways.

Manufactured to provide years of service in harsh, roof top environments, DURA-BLOK is made from 100% recycled

rubber, require no supplemental rubber pads, and will not float or blow away. 1”

(25.4) gaps between blocks allow water

to flow freely around longer assemblies. For added strength, the DURA-BLOK support channel is through bolted on all

sizes. For added visibility, a reflective strip is incorporated on both sides of each DURA-BLOK.

Beyond product durability, DURA-BLOK helps to dampen vibration, are not sharp or abrasive and require no roof

penetration to maximize existing roof life - and roof structural and environmental integrity.

Recommended Torque (In channels)

Materials & Finishes

See appropriate fitting pages.

Alternative finishes available upon request.

Metric

Metric dimensions are shown in parentheses.

Unless noted, all metric dimensions are in millimeters.

DURA-BLOK Supports

DURA-BLOK

™

Rooftop Supports

Strut Systems

153

Bolt Size

/4”-20

/16”-18

/8”-16

/2”-13

Foot/Lbs. 6 11 19 50

Nm 8 15 26 68

Bolt Size M6x1 M8 x1.25 M10 x 1.5 M12x1.75

Nm 12 17 36 62

Foot/Lbs. 9 13 27 46

Summary of content (10 pages)

PAGE 1
DURA-BLOK Supports DURA-BLOK™ Rooftop Supports Our DURA-BLOK products gives you a versatile and long-term solution for all your roof top support needs. Designed with flexibility in mind, DURA-BLOK is ideal for roof top support applications such as pipe, HVAC, duct, conduit, cable tray, and roof walkways. Manufactured to provide years of service in harsh, roof top environments, DURA-BLOK is made from 100% recycled rubber, require no supplemental rubber pads, and will not float or blow away. 1” (25.
PAGE 2
DURA-BLOK™ Rooftop Supports Support Bases Only • Base only - see chart for height, width and length. • 100% recycled rubber, UV resistant. • Load Rating - Ultimate Uniform Load (See Chart Below)* • DURA-BLOK channel support is designed as an economical support for piping systems, cable tray, HVAC equipment and many other applications. The DURA-BLOK is UV resistant and suitable for any type of roofing material or other flat surfaces. Material effectively accepts screw fasteners for securing accessories.
PAGE 3
DURA-BLOK™ Rooftop Supports DB10 SERIES Support Bases with B22 Channel • Two (2) bases bridged with 12 ga. (2.6mm) galvanized channel 15/8” high (41.3mm) - see chart for height, width and length. • 100% recycled rubber, UV resistant. • Load Rating: 1000 lbs. (4.45kN) (Uniform Load)* • DURA-BLOK DB10-Series channel support is designed for superior support of piping systems, cable tray, HVAC equipment, walkway systems and many other applications.
PAGE 4
DURA-BLOK™ Rooftop Supports DBE Series Support Base with Rod Risers & Channel • Base with (2) 1/2” electro zinc all threaded rod risers - Top channel is 1” (25.4mm) tall. See chart for adjustable height x wide x length. • 100% recycled rubber, UV resistant. • Load Rating* 200 lbs. (0.
PAGE 5
DURA-BLOK™ Rooftop Supports DB__DS Series Support Bases with B22SH Vertical & Horizontal Channel Members • Product is shipped unassembled. • Two (2) DB20 bases with 14 ga. (1.9mm) galvanized channel 1” high (25.4mm) Bases are 5” (127.0mm) high x 6” (152.4mm) wide x 20.2” (513.1mm) long. Vertical & Horizontal Riser Channels (SH Style) - 15/8” (41.3mm) x 15/8” (41.3mm) x 12 ga. (2.6mm) Fittings & Hardware - Electro-Plated Steel • 100% recycled rubber, UV resistant. • Ultimate Load Rating: 1000 lbs. (4.
PAGE 6
DURA-BLOK™ Rooftop Supports DB__DS Series cont. A Min. to Max. Part No. In. B mm In. mm (343) DB2318DS 10.56” to 20.75” (268 to 527) 131/2” DB2918DS 10.56” to 26.75” (268 to 679) 131/2” (343) DB4118DS 10.56” to 38.75” (268 to 984) 131/2” (343) DB5318DS 10.56” to 50.75” (268 to 1289) 131/2” (343) DB2324DS 10.56” to 20.75” (268 to 527) 191/2” (495) DB2924DS 10.56” to 26.75” (268 to 679) 191/2” (495) DB4124DS 10.56” to 38.75” (268 to 984) 191/2” (495) DB5324DS 10.56” to 50.
PAGE 7
DURA-BLOK™ Rooftop Supports DBR Series Support Bases with B42 Channel & Pipe Roller • Base with 14 ga. (1.9mm) galvanized channel 1” high (25.4mm) tall see chart for height, width and length. • 100% recycled rubber, UV resistant. • Load Rating: (See Chart Below)* • DURA-BLOK DBR-Series support is designed to support pipe where longitudinal movement is expected. The DURA-BLOK is UV resistant and approved for installation on any type of roofing material or other flat surfaces.
PAGE 8
DURA-BLOK™ Rooftop Supports Rooftop Applications DURA-BLOK Supports Strut Systems 160
PAGE 9
DURA-BLOK™ Rooftop Supports Rooftop Supports In Walkway Applications • Safety Grating is available with slip resistant GRATE-LOCK™, helping provide a safe walkway for foot traffic on the roof. DURA-BLOK Supports • Easy to install, elevated design, creates an identifiable path for foot traffic helping prevent wear and tear to the roof surface. • The cross-over design offers safe passage over existing cabling, piping, cable tray or any other interference on the rooftop.
PAGE 10
DURA-BLOK™ Rooftop Supports DURA-BLOK Supports Strut Systems 162