CoolR Group CoolR Vista USER MANUAL 1 December 2019 December-16-2019
CoolR Group Contents 1.Pre-install Checklist .............................................................................................................................................. 2 2. Physical Installation ............................................................................................................................................. 3 Initiate .............................................................................................................................................
CoolR Group Physical Installation Initiate 1. Note down the serial# & MAC address of the vista. 2. Note down the asset (cooler serial/name) & outlet (location/store) details Identify install position 1. Coolr Smart Vista should be placed on inner wall of the Door of the cooler. 2. Ideally, Vista should be placed vertically at center of cooler door on handle side. Install 1. Clean the glass to remove any moisture 2.
CoolR Group Device Monitor 1. From Home screen Expand main menu ( 2. Select “Device Monitor” from the list. ) 3. In device monitor screen, expand options menu on top right ( to show you vista device. ) & Select “Start Scan” & wait for scan Configuration & Install 1. Once you see you vista serial you can connect to it by selecting blue circle next to the serial number. 2.
CoolR Group 3. After successful Install the pop-up will appear “Device Installed successfully” 4. You can select the back (Arrow) button to return back to device monitor screen. Settings: WIFI Vista Mode Enable/Disable 1. Navigate to Device Monitor Screen & Reconnect with the Vista device, expand options menu on top right ( ) & Select “Start Scan” & wait for scan to show you vista device. 2. Select the appropriate Device Serial by Selecting the “V” icon to enter onto the Device Details screen.
CoolR Group 3. Scroll down till where “Wifi Settings” details have mentioned. - Enable the WIFI Vista Mode Enter SSID and Password Select “Send” Select Save icon. NOTE: - If success, the device sends a ping data to the server and the events data (if any). - After that you can leave the commands from CoolR Portal. Device will connect and send data to server. Troubleshooting Issue: Can’t find application PlayStore/App store You can alternatively download the application from a.https://itunes.apple.
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.