CoolR Group 4G Hub Model No: CSH - 0401 CoolR iot Global Hub USER MANUAL 1 December 2019
CoolR Group Contents A. Overview ............................................................................................................................................................. 4 B. Specification ........................................................................................................................................................ 4 1.1 Technical Specification .....................................................................................................................
CoolR Group Upload Logs ....................................................................................................................................................... 11 Disclaimer of Warranties This device complies with part 15 of the FCC Rules.
CoolR Group Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided.
CoolR Group 1. 2. 3. 4. TXO 4G 3G 2G : : : : Min Frequency(MHz) 694 824 824 Min Frequency(MHz) 2155 2155 1990 Direct conversion transmitter (TLE/3G/8PSK) and DFM for GMSK Dedicated power detection circuits for power control over specific power range 2LB/2MB/1HB TX output port Hybrid Direct Conversion (4G/3G/)/ LowIF (GGE, DCHSDPA) receive RF section also includes Bluetooth /WiFi/FM chips MT6625LN Device features: Bluetooth Features Compliant with Bluetooth 4.
CoolR Group 2.6 Installation 2.6.1 Using Tape: - It can be pasted on Glass or Wood by using Double tape which already provided on Device from Manufacturing side. 2.6.2 Using Screws: - It has screw option too for holding it on one place.
CoolR Group D. Validating Data 3.1 Web 3.1.1 Log In: - User can login with the credentials provided by Admin. 3.1.2 Finding Your Device: - - We can see our Device with the help of Serial# No./ MAC Address / IMEI on CoolR Dashboard. Just apply a filter on Serial Number, IMEI or Mac Address on Gateway Screen. Dashboard URL: dashboard2dev.coolrgroup.com 3.1.3 Verifying Pings: - After selecting our device, we can see the data on Child Table on Gateway Screen.
CoolR Group 3.2 Mobile 3.2.1 Log In: - We need RN App “Mobile App Version” to logging in. We can use same credentials which we have used in Web Dashboard. 3.2.2 Finding Your Device: - After log in, select the Smart Device option from Menu Bar.
CoolR Group E. Remote Management (form CoolR Dashboard) 4.1 Web 4.1.1 Options: - User have an option to Manage the Device Remotely from Dashboard http://dashboard2dev.CoolRgroup.com . We can access our device and check and validate the data as well. We can add or delete the Asset / Client / user / Outlets / products /Assign the roles as well. Also we can set Planograms and check the Consumer Records as well.
CoolR Group 4.1.2 Validate: - User can be Validate data of Pings events / Connectivity / Door Events / can check and upload Images from Vista / can check Latitude and Longitude of Location, it will change through GPS system which are installed in the device. 4.2 Mobile 4.2.1 Options: - We have an another option to manage our device remotely by using MDM Application. It has android and iOS version as well; we can use either as per our requirement.
CoolR Group ADB Enable or Disable App Data Usage Data Usage Bluetooth ON/OFF Get Date and Time Hotspot ON/OFF Install and Uninstall App Kill App Wi-Fi Enable and Disable Wi-Fi Scan Launch App Take Screenshot Update App Update Config Upload Logs USER MANUAL 11