User Guide
Table of Contents Table of Contents ........................................................................................................................................... i Introduction.................................................................................................................................................... 2 About the User Guide............................................................................................................................
Introduction The following topics describe the basics of using this guide and your new mobile hotspot. About the User Guide Thank you for purchasing your new Coolpad StreamTM. The following topics explain how best to use this guide to get the most out of your mobile hotspot. Before Using Your Mobile Hotspot Read the Quick Start Guide that was packaged with your mobile hotspot thoroughly for proper usage. Accessible services may be limited by subscription contract conditions.
Set Up Your Mobile Hotspot The following topics give you all the information you need to set up your mobile hotspot and wireless service the first time. Parts and Functions These topics illustrate your mobile hotspot’s primary parts and key functions. Mobile Hotspot Layout The following illustration outlines your mobile hotspot’s primary external features and keys. Part Description Power key Hold the Power key for 3 seconds to power the device on/off.
LED indicators Display network signal, Wi-Fi, SMS, battery charge and mobile data status. USB port Use the USB port to charge your device via the USB cable. Reset Hold both the Power key and the WPS key simultaneously for 15 seconds. All LED indicators will flash green 4 times to indicate that the device has been reset to factory default settings. Reboot Hold the Power key for 32 seconds to restart it when the device becomes unresponsive. Network indicator Displays your current network status.
Replacing Battery: The battery is a consumable item. It needs to be replaced if operating time shortens noticeably. Purchase a new battery. Cleaning: Clean soiled terminals between battery and mobile hotspot with a clean, dry cotton swab. Soiled terminals can result in a poor connection and prevent charging, etc. Insert the Battery Follow these instructions to insert your mobile hotspot’s battery safely and properly. 1. Remove the battery cover. Lift gently in the direction shown. 2.
Remove the Battery Follow these instructions to remove your mobile hotspot’s battery. Always power the mobile hotspot off before removing the battery. 1. Remove the battery cover. Lift gently in the direction shown. 2. Remove the battery. Lift upward gently as shown. Charge the Battery Follow these instructions to charge your mobile hotspot’s battery using either the included AC adapter or via a USB connection on your computer. Charge Using the AC Adapter 1.
Charge Using a PC Connection Before using a PC connection to charge your mobile hotspot, ensure that the computer is turned on. Depending on the type of connection, your mobile hotspot’s battery may not charge. 1. Plug the USB-C connector into the USB port of your mobile hotspot. 2. Plug the other end of the USB cable into an external USB port on your computer. 3. After charging, remove the USB cable from both the mobile hotspot and the computer. SIM Card The SIM card is an IC card.
2. Insert the SIM card. Insert gently with gold IC chip facing downward. 3. Replace the battery cover. (See Insert the Battery.) Make sure all the tabs are secure and there are no gaps around the cover. Turn Your Mobile Hotspot On and Off The instructions below explain how to turn your mobile hotspot on and off. Turn Your Mobile Hotspot On ■ Press and hold the Power key for 3 seconds. Your mobile hotspot will power on. Turn Your Mobile Hotspot Off ■ Press and hold the Power key for 3 seconds.
1. Power on your Mobile Hotspot and enable the Wi-Fi function from the device you would like to connect. 2. Press and hold the WPS key on your device for 3 seconds to start the Wi-Fi Protected Setup authentication process. 3. Enable the WPS function on your Wi-Fi device in order to respond to this authentication process. 4. Follow the system prompts on your Wi-Fi device to finish the connection. 5. If no Wi-Fi device is connected within 2 minutes, the WPS function will automatically turn off.
Manage Your Mobile Hotspot You can access your Mobile Hotspot device information using an Internet browser or by connecting the device to a computer via the USB cable. Access Mobile Hotspot Using a Browser 1. Connect to your hotspot device through Wi-Fi using the network connection software on your computer. Provide the Wi-Fi network password, if requested. 2. Open a browser and enter http://mobile.hotspot or http://192.168.0.1 in the address bar.
Access Mobile Hotspot Using USB Cable 1. Connect your Coolpad Stream Mobile Hotspot to the computer with the USB cable. 2. Power on your device. 3. The computer operating system detects and recognizes new hardware and finishes the installation automatically. 4. Open a browser and enter http://mobile.hotspot or http://192.168.0.1 in the address bar. The Coolpad Stream Mobile Hotspot Web User Interface screen will appear. 5. Click Login on the top right of the Web UI screen. The login screen will appear. 6.
Web UI Configuration Home On the Web User Interface screen, click Home to enter the Home screen. Here you can view network status, network name, time connected, data used, etc. ■ Connection: Displays network status, network name, time connected, data used, and more. Click Connect/Disconnect to connect/disconnect the Internet. ■ Data Usage: Check data usage in details. Connected Devices On the Web User Interface screen, click Connected Devices to enter the Connected Devices screen.
Change Mobile Hotspot’s Access Status When the Access Status "Allow all devices to access with password" is selected, users will be allowed to access to network via use of correct password. When the Access Status "Allow only users on Permitted list" is selected, only users that have been granted access by adding a user’s MAC address will be able to connect to the network. 1. Log into the Web User Interface. 2. Go to Connected Devices > Access Permissions.
14
Settings On the Web User Interface screen, click Settings to enter the Settings screen. Here you can view and change Wi-Fi settings, mobile network settings, device settings and advanced router settings. Wi-Fi Basic: Manage the basic Wi-Fi settings to personalize the Wi-Fi name, password, authentication method, maximum number of devices connected, and more.
16
Advanced: Manage the advanced Wi-Fi settings to personalize 802.11 mode, frequency bandwidth, Wi-Fi channel, WPS, and more.
Change Mobile Hotspot Network Name (SSID) 1. Access http://mobile.hotspot or http://192.168.0.1. 2. Click Settings in the navigation area. 3. Select the Wi-Fi tab and click Basic. 4. Enter a new name in the Wi-Fi Name (SSID) field. 5. Click On or Off checkbox for Hide SSID to disable or enable broadcasting the hotspot’s Network Name (SSID). 6. Click Save Changes. Change Mobile Hotspot Wi-Fi Password 1. Access http://mobile.hotspot or http://192.168.0.1. 2. Click Settings in the navigation area. 3.
WPS You can enable Wi-Fi Protected Setup (WPS) by PIN (PIN code) or PBC (push-button) mode. If your client device supports WPS, there’s no need to enter the password manually when WPS is available. ■ PIN: Enter the PIN that is generated by the wireless access client. ■ PBC: Select PBC or press the WPS button on the device. Note: If there is no client connected to the Hotspot within two minutes, WPS will be deactivated.
Network Selection: Select network type, and set WAN connection mode. APN: Set the Access Point Name (APN) including profile, PDP type, profile name, APN, authentication, user name and password.
Factory Reset: Reset your device to factory defaults. Device Sleep Mode: Enter the sleep mode when no devices are connected after a specific time.
PIN Management: Manage the mobile hotspot PIN status and PIN code. Account Management: Change the mobile hotspot admin password.
Software Update: Update firmware, and unlock SIM card.
Backup and Restore: Back up your device settings and preferences to your computer. Reset your device to its factory default settings. Connection History: Displays the connection history including profile name, start time, end time, duration, uploaded data and downloaded data.
System Logs: Download system logs. Change Mobile Hotspot Admin Password 1. Access http://mobile.hotspot or http://192.168.0.1. 2. Click Settings in the navigation area. 3. Select the Device tab and click Account Management. 4. Follow steps under Account Management to update your Password. 5. Click Save Changes. If everything is entered correctly, the Success message will appear indicating the password was successfully changed.
2. Click Settings in the navigation area. 3. Select the Device tab and click Backup and Restore. 4. Click Restore factory defaults. 5. Click Yes to confirm. The parameters will be reset to factory defaults and the device will be restarted. Advanced Router LAN Settings: Manage your mobile broadband data connection.
Firewall: Enable IP address filtering to filter IP address. Enable portmapping to enable external computers to access WWW, FTP or other services provided by the LAN. Customization: Enable UPnP to allow device-to-device networking. Enable Out of Service Notification to get a notification when network is out of service.
About On the Web User Interface screen, click About to enter the About screen. Here you can view MEID, ICCID, IMEI, firmware version, IP address, Wi-Fi name, Wi-Fi password, device model, battery status, and more. ■ Connection: Displays phone number, MEID, ICCID, IMEI, IMEI SV, and IMSI. ■ Firmware: Displays firmware version, firmware build date, and web app version. ■ WWAN Info: Displays IP address, IPv6 address, and lifetime total transferred.
You can also click Debug button on the lower right of the About screen to view detail diagnostic information about your device.
Support On the Web User Interface screen, click Support to enter the Support screen. Here you can view support page, phone number, software version and copyright information. Click the support website to find more information about your device.
Specifications The following tables list your mobile hotspot’s and battery’s specifications. Mobile Hotspot Specifications Item Description Dimensions 4.56 inches x 2.70 inches x 0.54 inches Antenna Built-in SIM Card Nano SIM Operating temperature 0-55 ℃ Battery Specifications Item Description Nominal Voltage 3.
Copyright Information ©2021 Coolpad Technologies Inc. Coolpad® and Coolpad StreamTM are trademarks of Yulong Computer Telecommunication Scientific (Shenzhen) Co., Ltd. All Rights Reserved. Google and Android are trademarks of Google Inc. Other trademarks and trade names are the property of their respective owners. Screenshots and product images are simulated; they may differ from the actual product and are subject to change.