Setup Guide

MM831
2.4GHZ MODE
A. USING 2.4GHZ WIRELESS
AN OVERVIEW
1. Toggle the 2.4GHz switch on the bottom cover of the MM831 to enter 2.4GHz Mode. The DPI indicator
will continuously flash a blue light to confirm it is trying to connect to a device.
2. Plug the included dongle into the desired device. The MM831 should automatically connect to the
device.
3. If successfully paired, the DPI indicator will rapidly flash blue 3 times. If pairing is unsuccessful within
90 seconds, the MM831 will enter Standby Mode. In Standby Mode, (1) the lighting on the MM831's LED
ring, scroll wheel, and logo will be turned off, and (2) the DPI indicator will periodically flash purple once
every 15 seconds.
4. To pair with other devices, simply unplug the dongle and re-plug into another device. The MM831
should connect automatically. If successfully connected, the DPI indicator will rapidly flash blue 3 times.
If connecting is unsuccessful within 90 seconds, the MM831 will enter Standby Mode. In Standby Mode,
(1) the lighting on the MM831's LED ring, scroll wheel, and logo will be turned off, and (2) the DPI
indicator will periodically flash purple once every 15 seconds.
BLUETOOTH MODE
A. USING BLUETOOTH
AN OVERVIEW
Turning On Bluetooth
for the First Time
1. Toggle the Bluetooth switch on the bottom cover of the MM831 to enter Bluetooth Mode.
2. Press the "Pairing" button to enter Pairing Mode. The DPI indicator will continuously flash a blue light
to confirm you are in Pairing Mode.
3. Ensure the device that is connecting to the MM831 has also entered Pairing or Discovery Mode.
4. If pairing is successful, the DPI indicator will rapidly flash blue 3 times. If unsuccessful, the MM831's
DPI indicator will continue to flash; after 90 seconds, it will enter Standby Mode. In Standby Mode, (1) the
lighting on the MM831's LED ring, scroll wheel, and logo will be turned off, and (2) the DPI indicator will
periodically flash purple once every 15 seconds.
Turning On Bluetooth
After the First Time
1. Toggle the Bluetooth switch on the bottom cover of the MM831 to enter Bluetooth Mode. If the MM831
has been previously paired to a device, it will automatically connect to the previously synced device
within a few seconds. If the connection is successful, the DPI indicator will rapidly flash blue 3 times.
2. If the MM831 cannot find the previously connected device within 90 seconds, it will enter Standby
Mode. In Standby Mode, (1) the lighting on the MM831's LED ring, scroll wheel, and logo will be turned
off, and (2) the DPI indicator will periodically flash purple once ever y 15 seconds.
1. Toggle the Bluetooth switch on the bottom cover of the MM831 to enter Bluetooth Mode.
2. Press the "Pairing" button to enter Pairing Mode. The DPI indicator will continuously flash a blue light
to confirm you are in Pairing Mode.
3. Ensure the device that is connecting to the MM831 has also entered Pairing or Discovery Mode.
4. If pairing is successful, the DPI indicator will rapidly flash blue 3 times. If unsuccessful, the MM831's
DPI indicator will continue to flash; after 90 seconds, it will enter Standby Mode. In Standby Mode, (1) the
lighting on the MM831's LED ring, scroll wheel, and logo will be turned off, and (2) the DPI indicator will
periodically flash purple once every 15 seconds.
B. MANUALLY PAIRING
DEVICES TO THE MM831
1. When the battery level falls below 15%, all LED lighting will remain off, and the DPI
indicator will begin to flash RED once every 15 seconds.
2. When the battery level falls below 5%, the MM831 will go into deep sleep mode. All
MM831 lighting will be turned off - including the DPI indicator.
The MM831 will display the "Star" lighting effect in purple.
WIRELESS MODE
If in Pairing /
Connecting Mode
The DPI indicator will continuously flash a BLUE light one every second.
The DPI indicator will rapidly flash BLUE 3 times.
WIRELESS MODE
If Pairing /
Connecting is Successful
INDICATOR LIGHT STATUS
The MM831 will display the "Rainbow Wave" lighting effect.
LOW BAT T ERY
IN CH ARGING MODE
AT FULL BAT T ERY
IMPORTANT
Please charge your mouse for at least 2 hours before using for the first time to ensure optimal battery usage.
WIRED MODE
When toggled in Wired Mode, simply connect the MM831 cable to PC or laptop device for
plug-and-play functionality.
CHARGING MODE
The MM831 will automatically start charging when it is plugged into any PC of laptop. It
can also be charged if plugged into a wall outlet, or if placed on a Qi wireless charging
device.
In Charging Mode, the MM831 will display the "Star" lighting effect in purple. At Full
Battery, it will switch to the "Rainbow Wave" lighting effect.
B. S WITCHING TO
WIRED MODE
C. CHARGING THE MM 831
WIRELESS SETUP GUIDE