Settings and Operations 4.1 Basic Settings If it is the first time using a receiver, you should set parameters for system configuration. Refer to the following section. 1. Turn on your TV and Satellite receiver. 2. Press the MENU button, main menu screen will appear as shown below. 1. Select Installation on the Main Menu. 2. Select LNB Power. 3. If LNB Power is independently supplied from outside source, set the LNB Power OFF. Otherwise set it ON. 4.
Basic Settings If you have a DiSEqC 1.2 motoried system to control your satellite antenna you have to make the following setting. First, you must select ON on DiSEqC 1.2 of LNB Setting in the TP Configuration. < Please refer to the TP Configuration section > 1. Select DiSEqC 1.2 Limit Settings of the installation. 2. You should set the East Limit and West Limit of your satellite antenna If you use the satellite receiver at first.
Settings and Operations to search for the position of a satellite manually. Store Stores the current position of the motor for the selected satellite name. Goto Moves the motor to the stored position of the selected satellite name. You have to know valid value for your LNB at first. 1. Select TP Configuration of the installation. 2. Select correct name of Satellite. If there is no proper satellite name listed in the item, select one from any of USER1 ~ USER 19. 3.
Basic Settings 4. For universal type of LNB, select Universal from LNB Type item and input the LNB frequency value on Freq.High and Freq.Low by using VOL or numeric key. For standard type of LNB, select Standard from LNB Type and input correct value on Freq.. 5. While only 1 antenna is in use, set the 0/12V switch and DiSEqC mode. to Disable. In case of STANDARD, select OFF from 22KHz.
Settings and Operations Note Depending on certain TP or satellite, the Network Search function may not work. 10. To use the Multi Search function, connect the DiSEqC switch or set the DiSEqC 1.2 of Installation. You can search all the channels from the satellites which you select. Select the satellites by FAV button, and press Multi Search. 11. In case of searching a certain satellite which can not be searched by TP Search, add channels by PID.
Viewing TV(or Radio) 4.2 Viewing TV(or Radio) 1. Press the Power button. 2. Press the TV(or Radio) button. 3. If you want to see all TV channel list, click the MENU button and then select the TV Channels(or Radio Channels). TV Channels(or Radio Channels) window will appear. Click the , you will see current Satellite name box. Select any satellite in the satellite name box, only the TV list of selected satellite will be displayed. VOL Viewing Favorite Channel 1. Press FAV key. . To move to next or 2.
Settings and Operations Edit TV Channels / Edit Radio Channels From these menus you can creat and edit channel list. Press OK button from Edit TV Channels and similar screen will be shown as below. Edit Satellite LIst. You can select your own satellites by creating favorite satellite list. To change the name of satellites, press “INFO” button on RCU. Arrange channel To change the channel orders from TV List, press OK button from your desired channel.
Viewing TV(or Radio) Creat favorite channel You can creat favorite channel list, containing the channel which you want to watch frequently. Press FAV button channel you want, and then selected channel will be moved to Favorite List box. To delete the disired channel from the Favorite List, press CLEAR button. Help function You can see the functions of each button in Edit TV List. Select the HELP button. Sort If you want to sort channels in order, select the SORT button in Edit channels.
Settings and Operations Edit Channel Name 1. Press INFO button on Edit TV or Edit Radio list. Cursor will be moved by using VOL , CH . 2. Press OK button on desired alphabet. To delete pre-selected alphabet, press CLEAR button. 3. To change character set(upper, lower, number), press INFO button. By using MENU button, it will be automatically stored and moved to previous menu. Parental Control If you use this funciton you have to enter the password everytime you start this satellite receiver. 1.
Other functions 4.3 Other functions Audio Selection If broadcasting channel is supporting multi language, different language can be selected from Audio Selection. 1. To select different language on current channel, select Audio Selection on the Main Menu. 2. Press OK button on your favorite language. According to different audio data on each channel, up to 4 different audio language types can be selected. TV Guide Press GUIDE button of RCU for channel information. This function works in digital mode only.
Settings and Operations order(transparency - Teletext only - Opacity) INFO Hold of current Teletext page PAGE UP/DOWN Move previous and next page in one CH UP/DOWN Move previous and next page in one FAV/TV/RADIO/F.BK/LANG/AUDIO 100/200/300/400/500/600 page level 0~9 Select Teletext page EXIT Exit teletext mode Clock Function - From the Front Pannel Menu button The clock shows 12:00 o’clock on the front panel when the power is off.
Other functions 2. By pressing "VOL " key, you can select a frame one by one. Selected frame will provide you a live picture. 3. By pressing ”CH “ key, you can change the channel in the selected frame. 4. Press “Exit” key, then the function goes to the full screen mode. 5. If you press “OSD” key one more time in the No.1 stage above, you will have 13 divided pictures and operations are same as above.