Digital Satellite Receiver Ū UserŪ s Guide
FOR YOUR SAFETY Information contained in this manual is subject to change without notice. No part of this publication may be copied, reproduced, or translated to another language for any purpose. FOR YOUR SAFETY Ҷ Be sure to read the user manual before starting the operation of the receiver. ҶDo not open the housing. The receiver contains high-voltage components and parts. Ҷ Even after switching off the receiver still contains high-voltage for a while. Ҷ Do not expose to rain or moisture.
CONTENTS For Your Safety 1. Before Getting Started 1.1 Main Features 1 1 1.2 Accessories 2 2. Controls and Functions 2.1 Front Pannel 3 3 2.2 Rear Pannel 4 2.3 Remote Control Unit 5 3. Connections 3.1 Connecting to the TV, VCR and Satellite Antenna 7 7 3.2 Connecting DiSEqC switch 7 3.3 Connecting to the TV, HiFi system and SPDIF 8 4. Settings and Operations 4.1 Basic Settings 9 9 4.2 Viewing TV(or Radio) 14 4.3 Other functions 18 4.4 System Settings 4.5 Game 21 24 5. Appendix 5.
BEFORE GETTING STARTED 1.1 Main Features Ҷ Easy Menu Function Ҷ TV Guide Function Ҷ RF Output Function Ҷ Electronic Program Guide(EPG) for On Screen Channel Information Ҷ Software Upgrading Function Through RS-232C Cable by PC Ҷ Perfect DiSEqC 1.
Accessories 1.
CONTROLS AND FUNCTIONS 2.1 Front pannel STANDBY ON Turn the power on/off. Volume ȭ ȯ Control volume, change item on menu or input frequency value. Channel ƞ Ơ Change channel, move menu, or input frequency value. OK Select menu or value on menu item. MENU Shows the menu application.
Rear pannel 2.2 Rear pannel IP Connection Network interface DIGITAL It receives signals from the LNB in the range of 950 ~ 2150MHz. Connect a satellite dish to DIGITAL. OUT It sends signal to the another receiver. AUDIO It provides stereo audio output. Connect the audio on TV to AUDIO with RCA cable. SPDIF Output for connection to a digital amplifier VIDEO It provides composite video output. Connect the Video on TV to VIDEO with RCA cable.
CONTROLS AND FUNCTIONS 2.3 Remote Control Unit Open the controller cover on the back and insert two batteries (AAA - 1.5V). POWER Turn the power on/off. TV/SAT Select between TV Channels and Satellite channels for RF output. Numeric(0~9) Change channel or input frequency value. F. BK It is to move to previous channel. AUDIO Select Stereo, Main or Sub from multi language channels available. CLEAR Clear wrong number input or delete channel from TV (Radio) list or favorite channel list.
Remote Control Unit OK Select menu or value on menu item. INFO Shows the information of current channel. Click the INFO button twice, TELETEXT mode will be displayed. GUIDE Shows the broadcasting information.(Video - Audio - LNB) FAV Add TV or Radio channel to the favorite list on Edit TV(Radio) Channels, or watch favorite channel from your favorite list. WIDE Select between standard 4:3 and wide 16:9 screen sizes. SUBT Visible / Invisible For the Subtitle. TEXT Change to Teletext mode.
Connections 3.1 Connecting to the TV, VCR and Satellite Antenna It is not necessary to adjust power, as the product is of free - voltage (110~220V ) 1. Connect the RF cable from the TV OUTPUT on the satellite receiver to a TV and connect the RF modulate on the VCR and the TV ANT.IN. 3. Connect an antenna to the LNB socket on the VCR or other receiver and cable of the satellite dish to the DIGITAL on the satellite receiver. 3.
Connecting to the TV 3.3 Connecting to the TV, HiFi system and 0/12V switch 1. Connect the RCA cable from the VIDEO INPUT on the TV to the VIDEO on the satellite receiver. 2. To use 0/12V switch, connect one cable of the 0/12V switch to the 0/12V on the satellite switch and connect another cable to the DIGITAL on the satellite receiver. 3. Connect a RCA stereo cable from the AUDIO RL on the satellite receiver to the AUDIO RL on the HiFi system.
Settings and Operations 4.1 Basic Settings If it is the first time using a receiver, you should set parameters for system configuration. Refer to the following section. 1. Turn on your TV and Satellite receiver. 2. Press the MENU button, main menu screen will appear as shown below. 1. Select Installation on the Main Menu. 2. Select LNB Power. 3. If LNB Power is independently supplied from outside source, set the LNB Power OFF. Otherwise set it ON. 4.
DiSEqC 1.2 Limit Settings If you have a DiSEqC 1.2 motoried system to control your satellite antenna you have to make the following setting. First, you must select ON on DiSEqC 1.2 of LNB Setting in the TP Configuration. < Ɇ Please refer to the TP Configuration section > 1. Select DiSEqC 1.2 Limit Settings of the installation. 2. You should set the East Limit and West Limit of your satellite antenna If you use the satellite receiver at first.
Settings and Operations to search for the position of a satellite manually. Store Stores the current position of the motor for the selected satellite name. Goto Moves the motor to the stored position of the selected satellite name. You have to know valid value for your LNB at first. 1. Select TP Configuration of the installation. 2. Select correct name of Satellite. If there is no proper satellite name listed in the item, select one from any of USER1 ~ USER 19. 3.
TP Configuration 4. For universal type of LNB, select Universal from LNB Type item and input the LNB frequency value on Freq.High and Freq.Low by using VOL ȭ ȯ or numeric key. For standard type of LNB, select Standard from LNB Type and input correct value on Freq.. 5. While only 1 antenna is in use, set the 0/12V switch and DiSEqC mode. to Disable. In case of STANDARD, select OFF from 22KHz.
Settings and Operations Note Depending on certain TP or satellite, the Network Search function may not work. 10. To use the Multi Search function, connect the DiSEqC switch or set the DiSEqC 1.2 of Installation. You can search all the channels from the satellites which you select. Select the satellites by FAV button, and press Multi Search. ठ 11. In case of searching a certain satellite which can not be searched by TP Search, add channels by PID.
Viewing TV 4.2 Viewing TV(or Radio) 1. Press the Power button. 2. Press the TV(or Radio) button. 3. If you want to see all TV channel list, click the MENU button and then select the TV Channels(or Radio Channels). TV Channels(or Radio Channels) window will appear. Click the , you will see current Satellite name box. Select any satellite in the satellite name box, only the TV list of selected satellite will be displayed. VOL ȭ Viewing Favorite Channel 1. Press FAV key. 2. Select a CH ƞ Ơ .
Settings and Operations Edit TV Channels / Edit Radio Channels From these menus you can creat and edit channel list. Press OK button from Edit TV Channels and similar screen will be shown as below. Edit Satellite LIst. You can select your own satellites by creating favorite satellite list. To change the name of satellites, press “INFO” button on RCU. Arrange channel To change the channel orders from TV List, press OK button from your desired channel.
Help Function Creat favorite channel You can creat favorite channel list, containing the channel which you want to watch frequently. Press FAV button channel you want, and then selected channel will be moved to Favorite List box. To delete the disired channel from the Favorite List, press CLEAR button. Help function You can see the functions of each button in Edit TV List. Select the HELP button. Sort If you want to sort channels in order, select the SORT button in Edit channels.
Settings and Operations Edit Channel Name 1. Press INFO button on Edit TV or Edit Radio list. Cursor will be moved by using VOL ȭ ȯ , CH ƞ Ơ. 2. Press OK button on desired alphabet. To delete pre-selected alphabet, press CLEAR button. 3. To change character set(upper, lower, number), press INFO button. By using MENU button, it will be automatically stored and moved to previous menu. Parental Control If you use this funciton you have to enter the password everytime you start this satellite receiver. 1.
Other functions 4.3 Other functions Audio Selection If broadcasting channel is supporting multi language, different language can be selected from Audio Selection. 1. To select different language on current channel, select Audio Selection on the Main Menu. 2. Press OK button on your favorite language. According to different audio data on each channel, up to 4 different audio language types can be selected. TV Guide Press GUIDE button of RCU for channel information. This function works in digital mode only.
Settings and Operations order(transparency - Teletext only - Opacity) INFO Hold of current Teletext page PAGE UP/DOWN Move previous and next page in one CH UP/DOWN Move previous and next page in one FAV/TV/RADIO/F.BK/LANG/AUDIO 100/200/300/400/500/600 page level 0~9 Select Teletext page EXIT Exit teletext mode Clock Function - From the Front Pannel Menu button The clock shows 12:00 o’clock on the front panel when the power is off.
Others functions 2. By pressing "VOL ȭ ȯ" key, you can select a frame one by one. Selected frame will provide you a live picture. 3. By pressing ”CH ƞ Ơ “ key, you can change the channel in the selected frame. 4. Press “Exit” key, then the function goes to the full screen mode. 5. If you press “OSD” key one more time in the No.1 stage above, you will have 13 divided pictures and operations are same as above.
Settings and Operations 4.4 System Settings Please make sure to press OK button always, after the changing items of System Settings. • Language Setting Select the language which you desire to display on the screen for your system. Press OK button to get in more options. Audio language Only if a current channel contains 2 or more audio language information, set the Audio Language as English or other favorite language. Then press OK button for its confirmation.
System Settings Please select the primary and secondary languages in your area. TV Standard Except for a few, most countires are using PAL system for TV signal, accordingly set TV Standard as PAL. To be more flexible for NTSC or PAL signal from different satellites, select MULTI for automatic signal conversion. Then press OK button for its confirmation. Time Adjustment To set the receiver time for EPG(Electronic Program Guide), set the time according to GMT(Greenwich Mean Time) by using CH ƞ Ơ.
Settings and Operations TV Aspect Ratio Select 4:3 for normal TV or 16:9 for wide TV. Then press OK button for its confirmation. If 4:3 ratio is selected on normal TV for wide channel, both left and right side of the screen will be a bit trimmed. If 16:9 ratio is selected on normal TV for wide channels the screen trim symptom will not occur. However the screen will be in narrow view. Wide screen will be properly viewed, only when wide channel is broadcasting.
System Settings 4.5 Game Select Game on the Main Menu. 1. To play game. Select Game & Press OK. 2. Select play mode by using number buttons & press Exit to Exit. 3. Select the color & press OK. 4. Now play the game.
Appendix 5.1 Troubleshooting SYMPTOM SOLUTION No picture display and no LED channel display Check the power connection No picture display with normal LED channel display 1. Check the connection with TV 2. Check the connection between TV outside input and receiver cable 1. Check the LNB, Frequency, Polarization and Symbol Rate from Installation menu 2. Check the connection of receiver or Antenna angle 1. Check between sound output connector and TV 2.
Glossary 5.3 Glossary LNB Low Noise Block converter. The LNB is an electronic unit mounted on satellite dish to receive signals reflected by the dish and convert to signals. L.O. frequency Local Oscillator frequency as a part of LNB. It converts the satellite frequency to usable signals for the receiver. Polarization Polarization allows several programs to be fitted into same frequency band.
Appendix NTSC National Television Standards Committee PAL Phase Alternate Line Ku band 11~18GHz Frequency C band 3~4GHz Frequency SCPC Single Channel Per Carrier MCPC Multi Channel Per Carrier PID Packet Identifier. TP TransPonder SCART, RCA A connector for connection of Satellite receiver, VCR and TV sets. VCR Video Cassette Recorder.
Made in Korea