User's Manual

Input mode Blue Red Red / blue
USB mode
AUX mode
3. Function Description 4. Operating Instructions
a. Audio input
1. Packing List
b. The three modes correspond to the indicator status
AUX audio cable X1Speaker X2
Manual X1
2. Product Parameters
Model
Bluetooth
Frequency
S/N Ratio
Distortion Rate
Speakers
Connection Line
Operating Temperature
Product Size
Play2S
V5.0
100Hz-20KHz
＞70dB
≤1%
4Ω 5W
AUX audio cable, USB power cable (data cable)
-5 - 40℃
93×93×173mm
USB power cord X1
Connection line
a. Power on
(1) Insert one end of the supplied USB power cable (data cable) into the DC IN jack of
the R speaker (main unit), and then insert a 5V USB charger (the charger can be used
with mobile phone chargers, etc.) at the USB interface, or a computer’ s USB port. The
speaker turns on automatically.
(2) In any mode, press and hold the “volume button” for 3 seconds, the speaker will
turn off and the indicator light will go out; in the shutdown state, press the “volume
button”to turn it on.
b. USB sound card decoding and playback
(1) Use the USB cable to connect the R speaker and the computer, (The computer will
automatically install the audio driver for the first time), the audio will automatically turn
on and the red indicator light will be on;
(2) Note: Please remember turn on the speaker first, then open the music file on the
computer.
c. AUX in mode
Insert the 3.5 audio cable into the AUX in interface of the R speaker, short press the
“volume button” to switch the mode to AUX mode, the indicator light of the R speaker
turns into alternating red and blue, then you can play the music on the source device .
d. Bluetooth wireless mode
(1) Short press the “volume button” to switch to Bluetooth mode, the blue indicator light
flashes, then open the Bluetooth device search “CoocaaPlay2S” and connect, after the
connection is successful, you can play music on the speaker via Bluetooth;
(2) If you want to switch the Bluetooth device connection, you need to disconnect the
previously connected Bluetooth device, and then use another Bluetooth device to search
for connection and play.
e. 3.5mm interface MIC microphone
In any mode, insert the 3.5mm connector MIC microphone into the MIC input port to
use the microphone function.
f. Powered by charger
Insert the USB cable connected to the R speaker into the 5V DC power adapter (the
adapter is not included, please purchase separately, it is recommended to use an
adapter with current ≥ 1A), and the speaker will automatically turn on.
AUX input
Connection line
Microphone input
Mode indicator
DC IN (charge + data transfer)
Long press: Turn on/off
Short press: Mode switch
Rotation: Volume up and down
Short press the “volume button” on the back of the “R” speaker to cycle through
the three modes;
Bluetooth
mode
Bluetooth waiting for pairing
Bluetooth paired
Long bright
Long bright
Flashing
Long bright
1. Please charge the speaker with a 5V 2A charger, so as to avoid insufficient power supply,
broken sound, or other noise;
2. It is strongly recommended to choose a high-quality 3.5mm connector microphone to
avoid howling during using MIC interface;
3. When using a computer USB port for power supply, due to insufficient power supply for
some computer USB ports, slight distortion or sound interruption may occur during playback
at maximum volume. At this time, please adjust the volume or change the power supply
method;
4. The speaker supports Win7 and above systems, Mac systems.
Note:
:Indicates that the content of the hazardous substance in all homogeneous
materials of the part is below the limit requirement specified in accordance
with the GB/T 26572.
X:Indicates that the content of the hazardous substance in all homogeneous
materials of the part is exceeding the limit requirement specified in accordance
with the GB/I 26572. There is no mature alternative solution that meets the
requirements of RoHS.
The numbers in this mark indicate that the environmental protection use
period of the product under normal use is 10 years. Some components may
also have an environmental protection use period indication, and the
environmental protection use period is subject to the figures in the indication.
Due to different product models, the product may not include all the above
parts except the host, please refer to the product packaging.
This form was prepared in accordance with the provisions of SJ/T 11364.
6.The Toxic and Hazardous Substances or Elements
Only for use in non-tropical climates.
Only suitable for areas below altitude of 2 000 m.
Name
Address
Date of
Purchase
Order ID
Fault
description
Email
User Manual
coocaa Play2S speaker
The speaker reaches full acoustic performance after it has
played music for about 7 days at 2/3 volume
7.FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
Toxic or harmful substances or elements
Part Name
Lead Mercury Cadmium
Hexavalent
Chromium
Polybrominated
biphenyls
Polybrominated
Diphenyl Ether
PCB part
Plastic part
Metal part
Speaker
Power adapter