M7304HRF 7”Wireless Monitor User Guide Please read this instruction manual before installation
Precautions Storage and keeping ‐ Do not expose the monitor to direct heat or cold. The storage temperature is ‐30 ~+80Ԩ, and the operating temperature is ‐10 ~+60Ԩ. The Humidity is Rh90%. ‐ Never use this device near a bathtub, wash basin, kitchen, damp basement, swimming pool or similar place. ‐ Never use this device in environments with excessive moisture, dust or smoke. ‐ Avoid dropping or striking this device.
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Warning Statements: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.
Product Specification Product Specification Audio output 8Ω 1W Loudspeaker 1 x 2415 speaker Supply voltage 9~36V Power supply connection 5.5mm DC Jack (Female) Power Consumption 0.25A @12VDC input voltage (3W) Video channel input 4 wireless channels (Quad split‐screen display) Antenna External 3dBi omnidirectional antenna Effective RF range 150m (Open area, line‐of‐sight) Operating frequency 2.
User Interface Operation Key button definition (Buttons from left to right order) - - Power: Screen ON/OFF Left/ right arrow: In menu mode, scroll up/ down menu items Increment/ decrement setting value In live view mode, speaker volume up/ down Tick icon/ OK: To confirm selection Camera icon: Switch camera channels in live view mode Main Menu ‘Cameras’ menu This menu option is used to adjust the image orientation of the camera as needed.
‘Pairing’ menu The wireless camera is pre‐paired to the monitor when shipped, there’s no need to go through the pairing procedure. In case additional cameras are to be added to the system (maximum 4 wireless cameras can be added), please follow the below procedure. 1.
‘Record’ menu Record Time: Sets the length (recording time) of each recorded video segment / file. (1,3,5mins) Format SD Card: Format a SD card Insert the microSD card to the slot as indicated in the picture below. Recording will start automatically, the system keeps recording and cannot be terminated manually by user, unless the monitor is being powered off / or the SD card is being removed.
The picture above shows 2‐channel recorded files. Each camera channel is recorded as a single file and grouped with a number. Each group can have a maximum of 4 recorded channels. If you choose “Mult‐view,” it will show all recorded channels in the same group in quad split‐screen mode. If you choose “Single View”, it will playback only the selected channel. ‘Setting’ menu 1. Date & Time: Sets the data and time 2.