Owner’s / Installation Manual Performance Series M7204RF LCD COLOR MONITOR Please read this manual thoroughly before operating the unit, and keep it for further reference. Convoy Technologies Inc.
Owner’s / Installation Manual Performance Series M7204RF PRECAUTIONS 1. Precautions Storage and keeping Do not expose the monitor to excessive heat or cold. The storage temperature of this device is -30°C ~ 75°C, and the oper ating temperature is -20°C ~ 60°C. The Humidity is Rh90%. Never use this device near a bathtub, wash basin, kitchen, damp basement, swimming pool or similar place. Never use this device in environments with excessive moisture, dust or smoke. Avoid dropping or striking this device.
Owner’s / Installation Manual Performance Series M7204RF PRECAUTIONS 1. Precautions Maintenance 1. Remove all the cable connections from the monitor before cleaning the unit. 2. Use a mild household detergent and clean the unit with a slightly damp, soft cloth. Never use strong solvents such as thinner or benzene, as they might damage the finish of the device.
Owner’s / Installation Manual Performance Series M7204RF Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Owner’s / Installation Manual Performance Series M7204RF 1) Mounting the Monitor Select a location allowing 2” space between monitor and walls, cabinets, or other objects to allow adequate air circulation around it. Avoid enclosed spaces, areas with excessive vibration or subject it to severe impacts. 2) Never use this device in environments with excessive moisture, dust or smoke . Do not place cables where they may be pinched or stepped on. Monitor is not designed to be waterproof.
Owner’s / Installation Manual M7204RF Operation (1) - button – For adjusting Down (2) + button – For adjusting UP (3) MENU – Access menu, select items (4) CAM – Switches between all cameras Connected to Monitor one at a time. (5) PAIR – Hold for 3sec to enter Pairing Mode (6) POWER – Turns monitor On and Off. (7) Power indicactor Light. (8) Loudspeaker Pressing MENU shows the MAIN MENU. MENU also will select and or change a feature’s ON/OFF status.
Owner’s / Installation Manual Performance Series M7204RF Replacing the Remote Batteries Troubleshooting Symptom possible Causes/Solutions No picture. No sound Improper connection of automobile adapter. Use of un-authorized power supply. Power switch is on OFF position No picture No sound Check whether locking cable is properly connected.