CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER USER'S MANUAL, VERSION 1.0.3 CSL CS468-2INT EPC Class 1 Gen 2 RFID Fixed Reader User’s Manual Version 1.0.
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER 1 USER'S MANUAL, VERSION 1.0.3 Content 1 CONTENT .......................................................................................................................................................2 2 FCC STATEMENT .........................................................................................................................................3 3 INTRODUCTION ................................................................................
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER 2 USER'S MANUAL, VERSION 1.0.3 FCC Statement FCC NOTICE: To comply with FCC part 15 rules in the United States, the system must be professionally installed to ensure compliance with the Part 15 certification. It is the responsibility of the operator and professional installer to ensure that only certified systems are deployed in the United States. The use of the system in any other combination is expressly forbidden.
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER 3 Introduction 3.1 Product Package 3.1.1 Basic Package Content USER'S MANUAL, VERSION 1.0.
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER USER'S MANUAL, VERSION 1.0.3 3.1.2 Product Specifications Fig 3-1 CS468-2INT Reader Features: • • • • • • • • • • ISO 18000-6C and EPCglobal Class 1 Gen 2 UHF RFID protocol compliant including dense reader mode Ultra long read range – peak at 9 meters for UPM Dogbone RFID tag Ultra high read rate – peak at 300 tags per second Sophisticated data handling for efficient management of large streams of tag data.
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER USER'S MANUAL, VERSION 1.0.3 Specifications: Physical Characteristics: Reader: Length: 27 cm; Width: 16 cm; Height: 2.4 cm; Weight: 700g Switch: Length: 16cm; Width: 13.
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER 4 Installation 4.1 Devices 4.1.1 Reader USER'S MANUAL, VERSION 1.0.3 The CSL CS468-2INT fixed RFID Reader is an EPCglobal Class 1 Gen 2 reader product.
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER 12VDC USER'S MANUAL, VERSION 1.0.
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER 4.2 USER'S MANUAL, VERSION 1.0.3 Operating Setup CS468-2INT has two power up modes: POE mode and 12V adaptor mode.
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER USER'S MANUAL, VERSION 1.0.3 AC/DC Adaptor CS771S-2 PC DC12V AC100~240V Antenna or Test Equipment with 50R Input port Ethernet Cable RF Cable CS468-2INT RF Output: SMA RP Jack Figure 4-5 12V power adaptor mode Setup The reader is directly connected to a host computer via the cable provided in the package.
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER USER'S MANUAL, VERSION 1.0.3 5 Regulatory Information 5.1 Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER 6 USER'S MANUAL, VERSION 1.0.3 Antenna Setup CS468-2INT is a 16 port reader where the ports are switched on in time one by one. At any time only 1 port is switched on and the RF power comes out only at that port. The rest of the ports are turned off so that no energy comes out from the other ports.
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER USER'S MANUAL, VERSION 1.0.3 The Antenna should be set up 0.5 meter apart is shown as below: 0.
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER USER'S MANUAL, VERSION 1.0.3 CS771S Ant-1 CS468-2INT Reader CS771S Ant-2 CS771S Ant-3 CS771S Ant-4 P0 P1 CS771S Ant-5 P2 P3 CS771S Ant-6 P4 P5 CS771S Ant-7 P6 P7 CS771S Ant-8 P8 P9 P10 CS771S Ant-9 CS771S Ant-10 P11 P12 CS771S Ant-11 P13 P14 CS771S Ant-12 P15 CS771S Ant-13 The CS468-2INT Reader is at time slot-5 at this moment. The port-4 is turned on. So only Ant-5 is active for transmitting the power at this moment.
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER USER'S MANUAL, VERSION 1.0.3 Appendix A. RFID Basics Passive tag RFID technology involves the reader, the antenna and the tag. The reader sends out energy in the relevant frequency band to the antenna via RF cables, and the antenna radiates the energy out. This energy impinges on an RFID tag. The RFID tag consists of an antenna coupled to an RFID IC.
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER USER'S MANUAL, VERSION 1.0.3 Appendix B. Operation Profiles Region 2: FCC Profile 0 1 2 3 4 5 R-T Modulation DSB-ASK DSB-ASK PR-ASK PR-ASK DSB-ASK PR-ASK Tari (µs) 12.50 25.00 25.00 6.25 25.00 R-T speed (kbps) 40 80 40 40 160 40 PIE 2:1 1.5:1 1.5:1 1.5:1 1.5:1 Pulse Width (uS) 12.50 6.25 12.50 12.50 3.13 12.
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER USER'S MANUAL, VERSION 1.0.3 Appendix C. RF channels Region 2: FCC Channel Frequency Channel Frequency Channel Frequency number (MHz) number (MHz) number (MHz) 1 902.75 18 911.25 35 919.75 2 903.25 19 911.75 36 920.25 3 903.75 20 912.25 37 920.75 4 904.25 21 912.75 38 921.25 5 904.75 22 913.25 39 921.75 6 905.25 23 913.75 40 922.25 7 905.75 24 914.25 41 922.75 8 906.25 25 914.75 42 923.25 9 906.