User Guide Service: info@onyxtheaters.tv 219 W. Wilshire Blvd. OKC, OK 73116 (405) 520-9220 ph.
HANDHELD REMOTE Below is the user-friendly Control4 Hand Held Remote. A select few buttons are given more explanation below for your reference in addition to simple tips and techniques to get you started with the Control4 automation system. ! This button (red 4) turns the Control4 system on. In addition, pressing this button will return you to the home screen on your TV no matter where you are within the on-screen navigator. Find confidence in the fact that you cannot “mess up” the system.
LED SCREEN Location The room that the hand held remote is controlling will be listed on the screen of the remote. This is the Location. Tip! Any hand held remote can control any room in the house that has Control4 userability. Always double check that the remote screen is displaying the room that you want to control. If the room differs, use the LIST button to select your room of choice. Source The current source that is playing will be displayed under the room location.
ROOM OFF ! ! ! ! ! ! Pressing this button to turn off all components, including TV.
Control4 Home Screen On-Screen Navigators and Touchscreens display the same elements. Your options display as an icon that you select either by touch on the touchscreen or by use of the hand-held remote, iPad, iPhone or iTouch for the on-screen navigator. Room Change The top center of the screen displays the current room being controlled. Press or scroll to highlight and select the room to change rooms. Tip! When an option is unavailable in the room, the icon will not appear on the home screen.
Watch This icon represents all viewing devices available. By selecting this icon, you can access your local TV, cable or satellite stations. Depending on your system, you may also have the option of AppleTV, Blu-Ray, TiVo or Security DVR. Cable or Satellite Provider 1. From the Control4 Home page, select Watch > TiVo or DirecTV, Dish Network, AT&T Universe to view. 2. Use the hand-held remote or touchscreen to navigate through channels. 3.
Listen From the Control4 Home page, select Listen to get started, view your options, and then select an option from below: Stations Use the Stations icon to play the radio (AM, FM, XM, or Satellite). In some cases, Pandora stations may be included. 1. From the Control4 Home page, select Listen > Stations to view the radio stations you want. 2. From the list, select the radio station you’d like to listen to. 3.
Blu-Ray To listen to a CD, insert it into the Blu-Ray player. Depending on your system, the Blu-Ray player may be located in the equipment rack or localized in the primary viewing room. 1. From the Control4 Home page, select Listen > BluRay. This will turn on the Blu-Ray player automatically. Use the touchscreen, hand-held remote, iPhone, iPad or iTouch to navigate through tracks. 2. Press the ! button on the Media Dashboard or Room Off on the remote to discontinue playing the Blu-Ray.
iHeartRadio Use the Listen icon to play from iHeartRadio. 1. From the Control4 Home page, select Listen > Music Server > Music Services > iHeartRadio. 2. Press the ! button on the Media Dashboard or Room Off on the remote to stop playing Pandora. TiVo To listen to TiVo, select Listen > TiVo. Depending on your system, the TiVo box may be located in the equipment rack or localized in the primary viewing room.
Lighting From the Control4 Home page, select Lighting to get started and to view your options. Adjust Lighting Use the Lighting icon to adjust your lights. You can view the lights in all rooms without changing the room displayed on your Navigator. 1. From the Control4 Home page, select Lighting. 2. Select a room. 3. Single tap or select a light to turn it on or off. 4. Select and hold the light to display a Dimmer slider for ramp up or ramp down.
Security System To arm or disarm the security system: from the Control4 Home screen, select Security > Security System. To arm the system in “Away” mode, enter your four digit security code and press Away. A 60 second delay will begin allowing time to exit the home through the designated delay door. To arm the system in “Stay” mode, enter your four digit security code and press Stay. This arms doors and windows but leaves motions disabled.
Bypass: see Bypass Security Zone below. ! Code: see Change Security Passcode below. ! To toggle chime, put in your security passcode and then press 9. ! Fire, Police, Ambulance call the appropriate dispatcher immediately. Fire and Ambulance will sound your alarm system. Police will not sound your alarm. ! If a power outage occurs, the Reconnect button re-establishes the connection between your security system and Control4. ! The Ready button allows you to view the faults in your security system.
To Bypass Security Zone: In some cases, a particular zone may need to be bypassed so that the system can be armed. To do this, use the Security icon to view the security keypad. 1. Locate zone number you wish to bypass. See next page for security zone list. 2. Enter your four digit security code. 3. Press 6. 4. Enter the two digit zone number. For example, if zone 6, enter 06. 5. Press * to enable bypass. To Omit Bypassed Zone: 1. Press four digit security code. 2. Press Off.
IP Cameras To view IP Cameras: From the Control4 Home screen, select Security > IP Cameras. 1. Select camera view, 7 day forecast or daily radar. 2. Use the options on the left to view all cameras in grid view, Next, Previous or Full Screen. 3. To exit, select the Control4 icon in the upper left hand corner of the screen. 4. To view recorded camera footage, use the app that was installed on your home computer.
Comfort To view, adjust or program thermostats: 1. From the Control4 Home screen, select Comfort. 2. Displayed are all of the available thermostats to view, adjust or program. 3. From here, the current temperature reading and settings are displayed. Thermostat settings can be adjusted by increasing or decreasing the heat and cool points AND selecting one of the hold options located directly under the thermostat reading. ! • The heat temperature specifies the coolest temperature you want your house.
To Program Thermostats: 1. From the Control4 Home screen, select Comfort. 2. Select which thermostat you would like to program. 3. Select the program button in upper right hand corner. 4. Select the days of the week you want to schedule for (i.e. weekdays, weekends, Monday, etc.) 5. Each day consists of 6 events: ! Wake - The time everyone is typically out of bed and want the house to warm or cool to it’s daytime occupied temperature.
Control4 Remote Login The Remote Login provides the ability to remotely control the home from anywhere. Follow the instructions below to access the Control4 Remote Login. 1. Go to My.Control4.com 2. Enter your username and password. If this is your first time to access your system through My.Control4.com, your username will be YourLastName@onyxtheaters.tv and your password will be control4.
4Store The 4Store is a marketplace for apps for your Control4 system. They vary from control enhancements, to games and sports scores, to energy management and monitoring. Onyx Theaters will set up your account, and you can browse the available apps on any navigator or touchscreen, or by visiting www.4Store.com. There are many free apps available, but for access to paid apps you will need to enter your payment information at www.4Store.com under My Account > set up purchasing.
Basic Troubleshooting Remote: If your remote display says “Low Battery”, replace the batteries in the back of the remote. Onyx Theaters recommends using Lithium batteries for best results. Tip! To ensure proper control, make sure the remote display shows the room name that you are trying to control. If the display shows a different room, push List, select House, select Location, choose and select which room you wish to control.
Basic Troubleshooting (Continued): Cox: If you are having issues with your Cox cable box, hit the Info, Volume Up, and Volume Down buttons at the same time. This will reset the box and will fix most issues related to Cox cable. Refer to picture below. TrippLite UPS: If you’ve lost all power, check your equipment rack to see if there are any lights on any of the equipment. If there are no lights, locate the TrippLite UPS and hold the power button down for 20 seconds.