Instructions / Assembly

ManualsBrandsContractors Wardrobe ManualsCloset Doors60 in. x 81 in. Colonial White Prefinished Hardboard Panels Steel Framed Interior Sliding Closet Door

Installation Instructions

Models

A spe n

™

, Econoline

™

C o l o n i al

™

and Savoy

™

Contractors Wardrobe

DESIGNERS • MANUFACTURERS • TOLL FREE: (800) CW-DOORS • (800) 293-6677 • www.cwdoor.com

26121 Avenue Hall • Valencia, CA 91355 • (661) 257-1177 • FAX: (661) 257-4907

Aspen/Econo/Colonial/Savoy 3/14/08 3:56 PM Page 1

Summary of content (5 pages)

PAGE 1
Aspen/Econo/Colonial/Savoy 3/14/08 3:56 PM Page 1 Installation Instructions Models Aspen , Econoline Colonial and Savoy ™ ™ ™ ™ Contractors Wardrobe ® DESIGNERS • MANUFACTURERS • TOLL FREE: (800) CW-DOORS • (800) 293-6677 • www.cwdoor.
PAGE 2
Aspen/Econo/Colonial/Savoy 3/14/08 3:56 PM Page 2 Illustrated Parts Breakdown (IPB) Models Aspen /Econoline / Colonial /Savoy ™ ™ ™ 5 ™ 13 5 14 11 13 5 15 5 13 15 2 14 5 5 11 15 Plastic Top Guide (#13) (Exploded View) 13 7 15 1 14 10 15 10 1 15 15 15 11 7 12 6 15 15 15 6 10 10 8,9 12 8,9 6 15 11 Steel Wheel Assembly (#12) 6 3 8,9 NO.
PAGE 3
Aspen/Econo/Colonial/Savoy 3/14/08 3:56 PM Page 3 FLOOR CHECK LIST: Congratulations on purchasing your new CW ® Wardrobe Doors. Now that you have opened the package, we want you to verify that you have all the necessary hardware supplied with your doors. 1. It is highly recommended that if you have carpet and do not have a cut-out in the carpet already, you should cut the carpet in order to install the Bottom Track (#3). We do not recommend installing the Bottom Track (#3) directly on top of carpet.
PAGE 4
Aspen/Econo/Colonial/Savoy 3/14/08 3:56 PM Page 4 INSTALLING THE DOORS STEP 1 Removing the Old Doors Remove old doors, brackets, top channel and bottom track. STEP 2 Installing the Top Channel A. Measure the opening at the top of the closet from wall to wall. B. Cut the new Top Channel (#2) to this dimension. When cutting the Top Channel (#2) we recommend that you use a Miter Box and Hacksaw for a straight cut. Cut one side only.
PAGE 5
Aspen/Econo/Colonial/Savoy STEP 4 A. 3/14/08 3:56 PM Page 5 Installing the Door Panels STEP 5 Make sure you have a pad or blanket to protect the Door Panels (#1) from scratches. Lay Door Panels (#1) with backside up on the floor. Locate one of the Steel Wheel Assemblies (#12) on the bottom of a Door Panel (#1). With a Phillips S c r e w d r i v e r, turn the adjusting screw to the right to lower the roller. Do this until you have 1″ of roller showing.